STM32F103xB HAL User Manual: stm32f1xx_hal

TIM HAL module driver. This file provides firmware functions to manage the following functionalities of the Timer (TIM) peripheral: + TIM Time Base Initialization + TIM Time Base Start + TIM Time Base Start Interruption + TIM Time Base Start DMA + TIM Output Compare/PWM Initialization + TIM Output Compare/PWM Channel Configuration + TIM Output Compare/PWM Start + TIM Output Compare/PWM Start Interruption + TIM Output Compare/PWM Start DMA + TIM Input Capture Initialization + TIM Input Capture Channel Configuration + TIM Input Capture Start + TIM Input Capture Start Interruption + TIM Input Capture Start DMA + TIM One Pulse Initialization + TIM One Pulse Channel Configuration + TIM One Pulse Start + TIM Encoder Interface Initialization + TIM Encoder Interface Start + TIM Encoder Interface Start Interruption + TIM Encoder Interface Start DMA + Commutation Event configuration with Interruption and DMA + TIM OCRef clear configuration + TIM External Clock configuration. More...

#include "stm32f1xx_hal.h"

Go to the source code of this file.

Functions
static void	TIM_OC1_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Timer Output Compare 1 configuration.
static void	TIM_OC3_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Timer Output Compare 3 configuration.
static void	TIM_OC4_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Timer Output Compare 4 configuration.
static void	TIM_TI1_ConfigInputStage (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
	Configure the Polarity and Filter for TI1.
static void	TIM_TI2_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI2 as Input.
static void	TIM_TI2_ConfigInputStage (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
	Configure the Polarity and Filter for TI2.
static void	TIM_TI3_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI3 as Input.
static void	TIM_TI4_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI4 as Input.
static void	TIM_ITRx_SetConfig (TIM_TypeDef *TIMx, uint32_t InputTriggerSource)
	Selects the Input Trigger source.
static void	TIM_DMAPeriodElapsedCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Period Elapse complete callback.
static void	TIM_DMAPeriodElapsedHalfCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Period Elapse half complete callback.
static void	TIM_DMADelayPulseCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Delay Pulse complete callback.
static void	TIM_DMATriggerCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Trigger callback.
static void	TIM_DMATriggerHalfCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Trigger half complete callback.
static HAL_StatusTypeDef	TIM_SlaveTimer_SetConfig (TIM_HandleTypeDef htim, TIM_SlaveConfigTypeDef sSlaveConfig)
	Slave Timer configuration function.
HAL_StatusTypeDef	HAL_TIM_Base_Init (TIM_HandleTypeDef *htim)
	Initializes the TIM Time base Unit according to the specified parameters in the TIM_HandleTypeDef and initialize the associated handle.
HAL_StatusTypeDef	HAL_TIM_Base_DeInit (TIM_HandleTypeDef *htim)
	DeInitializes the TIM Base peripheral.
__weak void	HAL_TIM_Base_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM Base MSP.
__weak void	HAL_TIM_Base_MspDeInit (TIM_HandleTypeDef *htim)
	DeInitializes TIM Base MSP.
HAL_StatusTypeDef	HAL_TIM_Base_Start (TIM_HandleTypeDef *htim)
	Starts the TIM Base generation.
HAL_StatusTypeDef	HAL_TIM_Base_Stop (TIM_HandleTypeDef *htim)
	Stops the TIM Base generation.
HAL_StatusTypeDef	HAL_TIM_Base_Start_IT (TIM_HandleTypeDef *htim)
	Starts the TIM Base generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_Base_Stop_IT (TIM_HandleTypeDef *htim)
	Stops the TIM Base generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_Base_Start_DMA (TIM_HandleTypeDef htim, uint32_t pData, uint16_t Length)
	Starts the TIM Base generation in DMA mode.
HAL_StatusTypeDef	HAL_TIM_Base_Stop_DMA (TIM_HandleTypeDef *htim)
	Stops the TIM Base generation in DMA mode.
HAL_StatusTypeDef	HAL_TIM_OC_Init (TIM_HandleTypeDef *htim)
	Initializes the TIM Output Compare according to the specified parameters in the TIM_HandleTypeDef and initializes the associated handle.
HAL_StatusTypeDef	HAL_TIM_OC_DeInit (TIM_HandleTypeDef *htim)
	DeInitializes the TIM peripheral.
__weak void	HAL_TIM_OC_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM Output Compare MSP.
__weak void	HAL_TIM_OC_MspDeInit (TIM_HandleTypeDef *htim)
	DeInitializes TIM Output Compare MSP.
HAL_StatusTypeDef	HAL_TIM_OC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Output Compare signal generation.
HAL_StatusTypeDef	HAL_TIM_OC_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation.
HAL_StatusTypeDef	HAL_TIM_OC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Output Compare signal generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_OC_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_OC_Start_DMA (TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
	Starts the TIM Output Compare signal generation in DMA mode.
HAL_StatusTypeDef	HAL_TIM_OC_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation in DMA mode.
HAL_StatusTypeDef	HAL_TIM_PWM_Init (TIM_HandleTypeDef *htim)
	Initializes the TIM PWM Time Base according to the specified parameters in the TIM_HandleTypeDef and initializes the associated handle.
HAL_StatusTypeDef	HAL_TIM_PWM_DeInit (TIM_HandleTypeDef *htim)
	DeInitializes the TIM peripheral.
__weak void	HAL_TIM_PWM_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM PWM MSP.
__weak void	HAL_TIM_PWM_MspDeInit (TIM_HandleTypeDef *htim)
	DeInitializes TIM PWM MSP.
HAL_StatusTypeDef	HAL_TIM_PWM_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the PWM signal generation.
HAL_StatusTypeDef	HAL_TIM_PWM_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the PWM signal generation.
HAL_StatusTypeDef	HAL_TIM_PWM_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the PWM signal generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the PWM signal generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_PWM_Start_DMA (TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
	Starts the TIM PWM signal generation in DMA mode.
HAL_StatusTypeDef	HAL_TIM_PWM_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM PWM signal generation in DMA mode.
HAL_StatusTypeDef	HAL_TIM_IC_Init (TIM_HandleTypeDef *htim)
	Initializes the TIM Input Capture Time base according to the specified parameters in the TIM_HandleTypeDef and initializes the associated handle.
HAL_StatusTypeDef	HAL_TIM_IC_DeInit (TIM_HandleTypeDef *htim)
	DeInitializes the TIM peripheral.
__weak void	HAL_TIM_IC_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM Input Capture MSP.
__weak void	HAL_TIM_IC_MspDeInit (TIM_HandleTypeDef *htim)
	DeInitializes TIM Input Capture MSP.
HAL_StatusTypeDef	HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Input Capture measurement.
HAL_StatusTypeDef	HAL_TIM_IC_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Input Capture measurement.
HAL_StatusTypeDef	HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Input Capture measurement in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_IC_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Input Capture measurement in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_IC_Start_DMA (TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
	Starts the TIM Input Capture measurement in DMA mode.
HAL_StatusTypeDef	HAL_TIM_IC_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Input Capture measurement in DMA mode.
HAL_StatusTypeDef	HAL_TIM_OnePulse_Init (TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
	Initializes the TIM One Pulse Time Base according to the specified parameters in the TIM_HandleTypeDef and initializes the associated handle.
HAL_StatusTypeDef	HAL_TIM_OnePulse_DeInit (TIM_HandleTypeDef *htim)
	DeInitializes the TIM One Pulse.
__weak void	HAL_TIM_OnePulse_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM One Pulse MSP.
__weak void	HAL_TIM_OnePulse_MspDeInit (TIM_HandleTypeDef *htim)
	DeInitializes TIM One Pulse MSP.
HAL_StatusTypeDef	HAL_TIM_OnePulse_Start (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Starts the TIM One Pulse signal generation.
HAL_StatusTypeDef	HAL_TIM_OnePulse_Stop (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Stops the TIM One Pulse signal generation.
HAL_StatusTypeDef	HAL_TIM_OnePulse_Start_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Starts the TIM One Pulse signal generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_OnePulse_Stop_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Stops the TIM One Pulse signal generation in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_Encoder_Init (TIM_HandleTypeDef htim, TIM_Encoder_InitTypeDef sConfig)
	Initializes the TIM Encoder Interface and initialize the associated handle.
HAL_StatusTypeDef	HAL_TIM_Encoder_DeInit (TIM_HandleTypeDef *htim)
	DeInitializes the TIM Encoder interface.
__weak void	HAL_TIM_Encoder_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM Encoder Interface MSP.
__weak void	HAL_TIM_Encoder_MspDeInit (TIM_HandleTypeDef *htim)
	DeInitializes TIM Encoder Interface MSP.
HAL_StatusTypeDef	HAL_TIM_Encoder_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Encoder Interface.
HAL_StatusTypeDef	HAL_TIM_Encoder_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Encoder Interface.
HAL_StatusTypeDef	HAL_TIM_Encoder_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Encoder Interface in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_Encoder_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Encoder Interface in interrupt mode.
HAL_StatusTypeDef	HAL_TIM_Encoder_Start_DMA (TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData1, uint32_t *pData2, uint16_t Length)
	Starts the TIM Encoder Interface in DMA mode.
HAL_StatusTypeDef	HAL_TIM_Encoder_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Encoder Interface in DMA mode.
void	HAL_TIM_IRQHandler (TIM_HandleTypeDef *htim)
	This function handles TIM interrupts requests.
HAL_StatusTypeDef	HAL_TIM_OC_ConfigChannel (TIM_HandleTypeDef htim, TIM_OC_InitTypeDef sConfig, uint32_t Channel)
	Initializes the TIM Output Compare Channels according to the specified parameters in the TIM_OC_InitTypeDef.
HAL_StatusTypeDef	HAL_TIM_IC_ConfigChannel (TIM_HandleTypeDef htim, TIM_IC_InitTypeDef sConfig, uint32_t Channel)
	Initializes the TIM Input Capture Channels according to the specified parameters in the TIM_IC_InitTypeDef.
HAL_StatusTypeDef	HAL_TIM_PWM_ConfigChannel (TIM_HandleTypeDef htim, TIM_OC_InitTypeDef sConfig, uint32_t Channel)
	Initializes the TIM PWM channels according to the specified parameters in the TIM_OC_InitTypeDef.
HAL_StatusTypeDef	HAL_TIM_OnePulse_ConfigChannel (TIM_HandleTypeDef htim, TIM_OnePulse_InitTypeDef sConfig, uint32_t OutputChannel, uint32_t InputChannel)
	Initializes the TIM One Pulse Channels according to the specified parameters in the TIM_OnePulse_InitTypeDef.
HAL_StatusTypeDef	HAL_TIM_DMABurst_WriteStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t BurstBuffer, uint32_t BurstLength)
	Configure the DMA Burst to transfer Data from the memory to the TIM peripheral.
HAL_StatusTypeDef	HAL_TIM_DMABurst_MultiWriteStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
	Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral.
HAL_StatusTypeDef	HAL_TIM_DMABurst_WriteStop (TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
	Stops the TIM DMA Burst mode.
HAL_StatusTypeDef	HAL_TIM_DMABurst_ReadStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t BurstBuffer, uint32_t BurstLength)
	Configure the DMA Burst to transfer Data from the TIM peripheral to the memory.
HAL_StatusTypeDef	HAL_TIM_DMABurst_MultiReadStart (TIM_HandleTypeDef htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, uint32_t BurstBuffer, uint32_t BurstLength, uint32_t DataLength)
	Configure the DMA Burst to transfer Data from the TIM peripheral to the memory.
HAL_StatusTypeDef	HAL_TIM_DMABurst_ReadStop (TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
	Stop the DMA burst reading.
HAL_StatusTypeDef	HAL_TIM_GenerateEvent (TIM_HandleTypeDef *htim, uint32_t EventSource)
	Generate a software event.
HAL_StatusTypeDef	HAL_TIM_ConfigOCrefClear (TIM_HandleTypeDef htim, TIM_ClearInputConfigTypeDef sClearInputConfig, uint32_t Channel)
	Configures the OCRef clear feature.
HAL_StatusTypeDef	HAL_TIM_ConfigClockSource (TIM_HandleTypeDef htim, TIM_ClockConfigTypeDef sClockSourceConfig)
	Configures the clock source to be used.
HAL_StatusTypeDef	HAL_TIM_ConfigTI1Input (TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
	Selects the signal connected to the TI1 input: direct from CH1_input or a XOR combination between CH1_input, CH2_input & CH3_input.
HAL_StatusTypeDef	HAL_TIM_SlaveConfigSynchro (TIM_HandleTypeDef htim, TIM_SlaveConfigTypeDef sSlaveConfig)
	Configures the TIM in Slave mode.
HAL_StatusTypeDef	HAL_TIM_SlaveConfigSynchro_IT (TIM_HandleTypeDef htim, TIM_SlaveConfigTypeDef sSlaveConfig)
	Configures the TIM in Slave mode in interrupt mode.
uint32_t	HAL_TIM_ReadCapturedValue (TIM_HandleTypeDef *htim, uint32_t Channel)
	Read the captured value from Capture Compare unit.
__weak void	HAL_TIM_PeriodElapsedCallback (TIM_HandleTypeDef *htim)
	Period elapsed callback in non-blocking mode.
__weak void	HAL_TIM_PeriodElapsedHalfCpltCallback (TIM_HandleTypeDef *htim)
	Period elapsed half complete callback in non-blocking mode.
__weak void	HAL_TIM_OC_DelayElapsedCallback (TIM_HandleTypeDef *htim)
	Output Compare callback in non-blocking mode.
__weak void	HAL_TIM_IC_CaptureCallback (TIM_HandleTypeDef *htim)
	Input Capture callback in non-blocking mode.
__weak void	HAL_TIM_IC_CaptureHalfCpltCallback (TIM_HandleTypeDef *htim)
	Input Capture half complete callback in non-blocking mode.
__weak void	HAL_TIM_PWM_PulseFinishedCallback (TIM_HandleTypeDef *htim)
	PWM Pulse finished callback in non-blocking mode.
__weak void	HAL_TIM_PWM_PulseFinishedHalfCpltCallback (TIM_HandleTypeDef *htim)
	PWM Pulse finished half complete callback in non-blocking mode.
__weak void	HAL_TIM_TriggerCallback (TIM_HandleTypeDef *htim)
	Hall Trigger detection callback in non-blocking mode.
__weak void	HAL_TIM_TriggerHalfCpltCallback (TIM_HandleTypeDef *htim)
	Hall Trigger detection half complete callback in non-blocking mode.
__weak void	HAL_TIM_ErrorCallback (TIM_HandleTypeDef *htim)
	Timer error callback in non-blocking mode.
HAL_StatusTypeDef	HAL_TIM_RegisterCallback (TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback)
	Register a User TIM callback to be used instead of the weak predefined callback.
HAL_StatusTypeDef	HAL_TIM_UnRegisterCallback (TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID)
	Unregister a TIM callback TIM callback is redirected to the weak predefined callback.
HAL_TIM_StateTypeDef	HAL_TIM_Base_GetState (TIM_HandleTypeDef *htim)
	Return the TIM Base handle state.
HAL_TIM_StateTypeDef	HAL_TIM_OC_GetState (TIM_HandleTypeDef *htim)
	Return the TIM OC handle state.
HAL_TIM_StateTypeDef	HAL_TIM_PWM_GetState (TIM_HandleTypeDef *htim)
	Return the TIM PWM handle state.
HAL_TIM_StateTypeDef	HAL_TIM_IC_GetState (TIM_HandleTypeDef *htim)
	Return the TIM Input Capture handle state.
HAL_TIM_StateTypeDef	HAL_TIM_OnePulse_GetState (TIM_HandleTypeDef *htim)
	Return the TIM One Pulse Mode handle state.
HAL_TIM_StateTypeDef	HAL_TIM_Encoder_GetState (TIM_HandleTypeDef *htim)
	Return the TIM Encoder Mode handle state.
HAL_TIM_ActiveChannel	HAL_TIM_GetActiveChannel (TIM_HandleTypeDef *htim)
	Return the TIM Encoder Mode handle state.
HAL_TIM_ChannelStateTypeDef	HAL_TIM_GetChannelState (TIM_HandleTypeDef *htim, uint32_t Channel)
	Return actual state of the TIM channel.
HAL_TIM_DMABurstStateTypeDef	HAL_TIM_DMABurstState (TIM_HandleTypeDef *htim)
	Return actual state of a DMA burst operation.
void	TIM_DMAError (DMA_HandleTypeDef *hdma)
	TIM DMA error callback.
void	TIM_DMADelayPulseHalfCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Delay Pulse half complete callback.
void	TIM_DMACaptureCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Capture complete callback.
void	TIM_DMACaptureHalfCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Capture half complete callback.
void	TIM_Base_SetConfig (TIM_TypeDef TIMx, TIM_Base_InitTypeDef Structure)
	Time Base configuration.
void	TIM_OC2_SetConfig (TIM_TypeDef TIMx, TIM_OC_InitTypeDef OC_Config)
	Timer Output Compare 2 configuration.
void	TIM_TI1_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter)
	Configure the TI1 as Input.
void	TIM_ETR_SetConfig (TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
	Configures the TIMx External Trigger (ETR).
void	TIM_CCxChannelCmd (TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState)
	Enables or disables the TIM Capture Compare Channel x.
void	TIM_ResetCallback (TIM_HandleTypeDef *htim)
	Reset interrupt callbacks to the legacy weak callbacks.

Detailed Description

Author:

MCD Application Team

  ==============================================================================
                      ##### TIMER Generic features #####
  ==============================================================================
  [..] The Timer features include:
       (#) 16-bit up, down, up/down auto-reload counter.
       (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
           counter clock frequency either by any factor between 1 and 65536.
       (#) Up to 4 independent channels for:
           (++) Input Capture
           (++) Output Compare
           (++) PWM generation (Edge and Center-aligned Mode)
           (++) One-pulse mode output
       (#) Synchronization circuit to control the timer with external signals and to interconnect
            several timers together.
       (#) Supports incremental encoder for positioning purposes

            ##### How to use this driver #####
  ==============================================================================
    [..]
     (#) Initialize the TIM low level resources by implementing the following functions
         depending on the selected feature:
           (++) Time Base : HAL_TIM_Base_MspInit()
           (++) Input Capture : HAL_TIM_IC_MspInit()
           (++) Output Compare : HAL_TIM_OC_MspInit()
           (++) PWM generation : HAL_TIM_PWM_MspInit()
           (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
           (++) Encoder mode output : HAL_TIM_Encoder_MspInit()

     (#) Initialize the TIM low level resources :
        (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
        (##) TIM pins configuration
            (+++) Enable the clock for the TIM GPIOs using the following function:
             __HAL_RCC_GPIOx_CLK_ENABLE();
            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();

     (#) The external Clock can be configured, if needed (the default clock is the
         internal clock from the APBx), using the following function:
         HAL_TIM_ConfigClockSource, the clock configuration should be done before
         any start function.

     (#) Configure the TIM in the desired functioning mode using one of the
       Initialization function of this driver:
       (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
       (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
            Output Compare signal.
       (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
            PWM signal.
       (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
            external signal.
       (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
            in One Pulse Mode.
       (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.

     (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
           (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
           (++) Input Capture :  HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
           (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
           (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
           (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
           (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().

     (#) The DMA Burst is managed with the two following functions:
         HAL_TIM_DMABurst_WriteStart()
         HAL_TIM_DMABurst_ReadStart()

    *** Callback registration ***
  =============================================

  [..]
  The compilation define  USE_HAL_TIM_REGISTER_CALLBACKS when set to 1
  allows the user to configure dynamically the driver callbacks.

  [..]
  Use Function @ref HAL_TIM_RegisterCallback() to register a callback.
  @ref HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle,
  the Callback ID and a pointer to the user callback function.

  [..]
  Use function @ref HAL_TIM_UnRegisterCallback() to reset a callback to the default
  weak function.
  @ref HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
  and the Callback ID.

  [..]
  These functions allow to register/unregister following callbacks:
    (+) Base_MspInitCallback              : TIM Base Msp Init Callback.
    (+) Base_MspDeInitCallback            : TIM Base Msp DeInit Callback.
    (+) IC_MspInitCallback                : TIM IC Msp Init Callback.
    (+) IC_MspDeInitCallback              : TIM IC Msp DeInit Callback.
    (+) OC_MspInitCallback                : TIM OC Msp Init Callback.
    (+) OC_MspDeInitCallback              : TIM OC Msp DeInit Callback.
    (+) PWM_MspInitCallback               : TIM PWM Msp Init Callback.
    (+) PWM_MspDeInitCallback             : TIM PWM Msp DeInit Callback.
    (+) OnePulse_MspInitCallback          : TIM One Pulse Msp Init Callback.
    (+) OnePulse_MspDeInitCallback        : TIM One Pulse Msp DeInit Callback.
    (+) Encoder_MspInitCallback           : TIM Encoder Msp Init Callback.
    (+) Encoder_MspDeInitCallback         : TIM Encoder Msp DeInit Callback.
    (+) HallSensor_MspInitCallback        : TIM Hall Sensor Msp Init Callback.
    (+) HallSensor_MspDeInitCallback      : TIM Hall Sensor Msp DeInit Callback.
    (+) PeriodElapsedCallback             : TIM Period Elapsed Callback.
    (+) PeriodElapsedHalfCpltCallback     : TIM Period Elapsed half complete Callback.
    (+) TriggerCallback                   : TIM Trigger Callback.
    (+) TriggerHalfCpltCallback           : TIM Trigger half complete Callback.
    (+) IC_CaptureCallback                : TIM Input Capture Callback.
    (+) IC_CaptureHalfCpltCallback        : TIM Input Capture half complete Callback.
    (+) OC_DelayElapsedCallback           : TIM Output Compare Delay Elapsed Callback.
    (+) PWM_PulseFinishedCallback         : TIM PWM Pulse Finished Callback.
    (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback.
    (+) ErrorCallback                     : TIM Error Callback.
    (+) CommutationCallback               : TIM Commutation Callback.
    (+) CommutationHalfCpltCallback       : TIM Commutation half complete Callback.
    (+) BreakCallback                     : TIM Break Callback.

  [..]
By default, after the Init and when the state is HAL_TIM_STATE_RESET
all interrupt callbacks are set to the corresponding weak functions:
  examples @ref HAL_TIM_TriggerCallback(), @ref HAL_TIM_ErrorCallback().

  [..]
  Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
  functionalities in the Init / DeInit only when these callbacks are null
  (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit
    keep and use the user MspInit / MspDeInit callbacks(registered beforehand)

  [..]
    Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only.
    Exception done MspInit / MspDeInit that can be registered / unregistered
    in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state,
    thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit.
  In that case first register the MspInit/MspDeInit user callbacks
      using @ref HAL_TIM_RegisterCallback() before calling DeInit or Init function.

  [..]
      When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or
      not defined, the callback registration feature is not available and all callbacks
      are set to the corresponding weak functions.

Attention:

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Definition in file stm32f1xx_hal_tim.c.

Functions

Detailed Description

© Copyright (c) 2016 STMicroelectronics. All rights reserved.