stm32f4xx_ll_spi.h File Reference

Header file of SPI LL module. More...

#include "stm32f4xx.h"

Go to the source code of this file.

Data Structures
struct	LL_SPI_InitTypeDef
	SPI Init structures definition. More...
struct	LL_I2S_InitTypeDef
	I2S Init structure definition. More...
Defines
#define	LL_SPI_SR_RXNE   SPI_SR_RXNE
#define	LL_SPI_SR_TXE   SPI_SR_TXE
#define	LL_SPI_SR_BSY   SPI_SR_BSY
#define	LL_SPI_SR_CRCERR   SPI_SR_CRCERR
#define	LL_SPI_SR_MODF   SPI_SR_MODF
#define	LL_SPI_SR_OVR   SPI_SR_OVR
#define	LL_SPI_SR_FRE   SPI_SR_FRE
#define	LL_SPI_CR2_RXNEIE   SPI_CR2_RXNEIE
#define	LL_SPI_CR2_TXEIE   SPI_CR2_TXEIE
#define	LL_SPI_CR2_ERRIE   SPI_CR2_ERRIE
#define	LL_SPI_MODE_MASTER   (SPI_CR1_MSTR | SPI_CR1_SSI)
#define	LL_SPI_MODE_SLAVE   0x00000000U
#define	LL_SPI_PROTOCOL_MOTOROLA   0x00000000U
#define	LL_SPI_PROTOCOL_TI   (SPI_CR2_FRF)
#define	LL_SPI_PHASE_1EDGE   0x00000000U
#define	LL_SPI_PHASE_2EDGE   (SPI_CR1_CPHA)
#define	LL_SPI_POLARITY_LOW   0x00000000U
#define	LL_SPI_POLARITY_HIGH   (SPI_CR1_CPOL)
#define	LL_SPI_BAUDRATEPRESCALER_DIV2   0x00000000U
#define	LL_SPI_BAUDRATEPRESCALER_DIV4   (SPI_CR1_BR_0)
#define	LL_SPI_BAUDRATEPRESCALER_DIV8   (SPI_CR1_BR_1)
#define	LL_SPI_BAUDRATEPRESCALER_DIV16   (SPI_CR1_BR_1 | SPI_CR1_BR_0)
#define	LL_SPI_BAUDRATEPRESCALER_DIV32   (SPI_CR1_BR_2)
#define	LL_SPI_BAUDRATEPRESCALER_DIV64   (SPI_CR1_BR_2 | SPI_CR1_BR_0)
#define	LL_SPI_BAUDRATEPRESCALER_DIV128   (SPI_CR1_BR_2 | SPI_CR1_BR_1)
#define	LL_SPI_BAUDRATEPRESCALER_DIV256   (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
#define	LL_SPI_LSB_FIRST   (SPI_CR1_LSBFIRST)
#define	LL_SPI_MSB_FIRST   0x00000000U
#define	LL_SPI_FULL_DUPLEX   0x00000000U
#define	LL_SPI_SIMPLEX_RX   (SPI_CR1_RXONLY)
#define	LL_SPI_HALF_DUPLEX_RX   (SPI_CR1_BIDIMODE)
#define	LL_SPI_HALF_DUPLEX_TX   (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE)
#define	LL_SPI_NSS_SOFT   (SPI_CR1_SSM)
#define	LL_SPI_NSS_HARD_INPUT   0x00000000U
#define	LL_SPI_NSS_HARD_OUTPUT   (((uint32_t)SPI_CR2_SSOE << 16U))
#define	LL_SPI_DATAWIDTH_8BIT   0x00000000U
#define	LL_SPI_DATAWIDTH_16BIT   (SPI_CR1_DFF)
#define	LL_SPI_CRCCALCULATION_DISABLE   0x00000000U
#define	LL_SPI_CRCCALCULATION_ENABLE   (SPI_CR1_CRCEN)
#define	LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__)   WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
	Write a value in SPI register.
#define	LL_SPI_ReadReg(__INSTANCE__, __REG__)   READ_REG(__INSTANCE__->__REG__)
	Read a value in SPI register.
#define	LL_I2S_SR_RXNE   LL_SPI_SR_RXNE
#define	LL_I2S_SR_TXE   LL_SPI_SR_TXE
#define	LL_I2S_SR_BSY   LL_SPI_SR_BSY
#define	LL_I2S_SR_UDR   SPI_SR_UDR
#define	LL_I2S_SR_OVR   LL_SPI_SR_OVR
#define	LL_I2S_SR_FRE   LL_SPI_SR_FRE
#define	LL_I2S_CR2_RXNEIE   LL_SPI_CR2_RXNEIE
#define	LL_I2S_CR2_TXEIE   LL_SPI_CR2_TXEIE
#define	LL_I2S_CR2_ERRIE   LL_SPI_CR2_ERRIE
#define	LL_I2S_DATAFORMAT_16B   0x00000000U
#define	LL_I2S_DATAFORMAT_16B_EXTENDED   (SPI_I2SCFGR_CHLEN)
#define	LL_I2S_DATAFORMAT_24B   (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)
#define	LL_I2S_DATAFORMAT_32B   (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)
#define	LL_I2S_POLARITY_LOW   0x00000000U
#define	LL_I2S_POLARITY_HIGH   (SPI_I2SCFGR_CKPOL)
#define	LL_I2S_STANDARD_PHILIPS   0x00000000U
#define	LL_I2S_STANDARD_MSB   (SPI_I2SCFGR_I2SSTD_0)
#define	LL_I2S_STANDARD_LSB   (SPI_I2SCFGR_I2SSTD_1)
#define	LL_I2S_STANDARD_PCM_SHORT   (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)
#define	LL_I2S_STANDARD_PCM_LONG   (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)
#define	LL_I2S_MODE_SLAVE_TX   0x00000000U
#define	LL_I2S_MODE_SLAVE_RX   (SPI_I2SCFGR_I2SCFG_0)
#define	LL_I2S_MODE_MASTER_TX   (SPI_I2SCFGR_I2SCFG_1)
#define	LL_I2S_MODE_MASTER_RX   (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)
#define	LL_I2S_PRESCALER_PARITY_EVEN   0x00000000U
#define	LL_I2S_PRESCALER_PARITY_ODD   (SPI_I2SPR_ODD >> 8U)
#define	LL_I2S_MCLK_OUTPUT_DISABLE   0x00000000U
#define	LL_I2S_MCLK_OUTPUT_ENABLE   (SPI_I2SPR_MCKOE)
#define	LL_I2S_AUDIOFREQ_192K   192000U
#define	LL_I2S_AUDIOFREQ_96K   96000U
#define	LL_I2S_AUDIOFREQ_48K   48000U
#define	LL_I2S_AUDIOFREQ_44K   44100U
#define	LL_I2S_AUDIOFREQ_32K   32000U
#define	LL_I2S_AUDIOFREQ_22K   22050U
#define	LL_I2S_AUDIOFREQ_16K   16000U
#define	LL_I2S_AUDIOFREQ_11K   11025U
#define	LL_I2S_AUDIOFREQ_8K   8000U
#define	LL_I2S_AUDIOFREQ_DEFAULT   2U
#define	LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__)   WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
	Write a value in I2S register.
#define	LL_I2S_ReadReg(__INSTANCE__, __REG__)   READ_REG(__INSTANCE__->__REG__)
	Read a value in I2S register.
Functions
__STATIC_INLINE void	LL_SPI_Enable (SPI_TypeDef *SPIx)
	Enable SPI peripheral.
__STATIC_INLINE void	LL_SPI_Disable (SPI_TypeDef *SPIx)
	Disable SPI peripheral.
__STATIC_INLINE uint32_t	LL_SPI_IsEnabled (SPI_TypeDef *SPIx)
	Check if SPI peripheral is enabled.
__STATIC_INLINE void	LL_SPI_SetMode (SPI_TypeDef *SPIx, uint32_t Mode)
	Set SPI operation mode to Master or Slave.
__STATIC_INLINE uint32_t	LL_SPI_GetMode (SPI_TypeDef *SPIx)
	Get SPI operation mode (Master or Slave)
__STATIC_INLINE void	LL_SPI_SetStandard (SPI_TypeDef *SPIx, uint32_t Standard)
	Set serial protocol used.
__STATIC_INLINE uint32_t	LL_SPI_GetStandard (SPI_TypeDef *SPIx)
	Get serial protocol used.
__STATIC_INLINE void	LL_SPI_SetClockPhase (SPI_TypeDef *SPIx, uint32_t ClockPhase)
	Set clock phase.
__STATIC_INLINE uint32_t	LL_SPI_GetClockPhase (SPI_TypeDef *SPIx)
	Get clock phase.
__STATIC_INLINE void	LL_SPI_SetClockPolarity (SPI_TypeDef *SPIx, uint32_t ClockPolarity)
	Set clock polarity.
__STATIC_INLINE uint32_t	LL_SPI_GetClockPolarity (SPI_TypeDef *SPIx)
	Get clock polarity.
__STATIC_INLINE void	LL_SPI_SetBaudRatePrescaler (SPI_TypeDef *SPIx, uint32_t BaudRate)
	Set baud rate prescaler.
__STATIC_INLINE uint32_t	LL_SPI_GetBaudRatePrescaler (SPI_TypeDef *SPIx)
	Get baud rate prescaler.
__STATIC_INLINE void	LL_SPI_SetTransferBitOrder (SPI_TypeDef *SPIx, uint32_t BitOrder)
	Set transfer bit order.
__STATIC_INLINE uint32_t	LL_SPI_GetTransferBitOrder (SPI_TypeDef *SPIx)
	Get transfer bit order.
__STATIC_INLINE void	LL_SPI_SetTransferDirection (SPI_TypeDef *SPIx, uint32_t TransferDirection)
	Set transfer direction mode.
__STATIC_INLINE uint32_t	LL_SPI_GetTransferDirection (SPI_TypeDef *SPIx)
	Get transfer direction mode.
__STATIC_INLINE void	LL_SPI_SetDataWidth (SPI_TypeDef *SPIx, uint32_t DataWidth)
	Set frame data width.
__STATIC_INLINE uint32_t	LL_SPI_GetDataWidth (SPI_TypeDef *SPIx)
	Get frame data width.
__STATIC_INLINE void	LL_SPI_EnableCRC (SPI_TypeDef *SPIx)
	Enable CRC.
__STATIC_INLINE void	LL_SPI_DisableCRC (SPI_TypeDef *SPIx)
	Disable CRC.
__STATIC_INLINE uint32_t	LL_SPI_IsEnabledCRC (SPI_TypeDef *SPIx)
	Check if CRC is enabled.
__STATIC_INLINE void	LL_SPI_SetCRCNext (SPI_TypeDef *SPIx)
	Set CRCNext to transfer CRC on the line.
__STATIC_INLINE void	LL_SPI_SetCRCPolynomial (SPI_TypeDef *SPIx, uint32_t CRCPoly)
	Set polynomial for CRC calculation.
__STATIC_INLINE uint32_t	LL_SPI_GetCRCPolynomial (SPI_TypeDef *SPIx)
	Get polynomial for CRC calculation.
__STATIC_INLINE uint32_t	LL_SPI_GetRxCRC (SPI_TypeDef *SPIx)
	Get Rx CRC.
__STATIC_INLINE uint32_t	LL_SPI_GetTxCRC (SPI_TypeDef *SPIx)
	Get Tx CRC.
__STATIC_INLINE void	LL_SPI_SetNSSMode (SPI_TypeDef *SPIx, uint32_t NSS)
	Set NSS mode.
__STATIC_INLINE uint32_t	LL_SPI_GetNSSMode (SPI_TypeDef *SPIx)
	Get NSS mode.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_RXNE (SPI_TypeDef *SPIx)
	Check if Rx buffer is not empty.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_TXE (SPI_TypeDef *SPIx)
	Check if Tx buffer is empty.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_CRCERR (SPI_TypeDef *SPIx)
	Get CRC error flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_MODF (SPI_TypeDef *SPIx)
	Get mode fault error flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_OVR (SPI_TypeDef *SPIx)
	Get overrun error flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_BSY (SPI_TypeDef *SPIx)
	Get busy flag.
__STATIC_INLINE uint32_t	LL_SPI_IsActiveFlag_FRE (SPI_TypeDef *SPIx)
	Get frame format error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_CRCERR (SPI_TypeDef *SPIx)
	Clear CRC error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_MODF (SPI_TypeDef *SPIx)
	Clear mode fault error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_OVR (SPI_TypeDef *SPIx)
	Clear overrun error flag.
__STATIC_INLINE void	LL_SPI_ClearFlag_FRE (SPI_TypeDef *SPIx)
	Clear frame format error flag.
__STATIC_INLINE void	LL_SPI_EnableIT_ERR (SPI_TypeDef *SPIx)
	Enable error interrupt.
__STATIC_INLINE void	LL_SPI_EnableIT_RXNE (SPI_TypeDef *SPIx)
	Enable Rx buffer not empty interrupt.
__STATIC_INLINE void	LL_SPI_EnableIT_TXE (SPI_TypeDef *SPIx)
	Enable Tx buffer empty interrupt.
__STATIC_INLINE void	LL_SPI_DisableIT_ERR (SPI_TypeDef *SPIx)
	Disable error interrupt.
__STATIC_INLINE void	LL_SPI_DisableIT_RXNE (SPI_TypeDef *SPIx)
	Disable Rx buffer not empty interrupt.
__STATIC_INLINE void	LL_SPI_DisableIT_TXE (SPI_TypeDef *SPIx)
	Disable Tx buffer empty interrupt.
__STATIC_INLINE uint32_t	LL_SPI_IsEnabledIT_ERR (SPI_TypeDef *SPIx)
	Check if error interrupt is enabled.
__STATIC_INLINE uint32_t	LL_SPI_IsEnabledIT_RXNE (SPI_TypeDef *SPIx)
	Check if Rx buffer not empty interrupt is enabled.
__STATIC_INLINE uint32_t	LL_SPI_IsEnabledIT_TXE (SPI_TypeDef *SPIx)
	Check if Tx buffer empty interrupt.
__STATIC_INLINE void	LL_SPI_EnableDMAReq_RX (SPI_TypeDef *SPIx)
	Enable DMA Rx.
__STATIC_INLINE void	LL_SPI_DisableDMAReq_RX (SPI_TypeDef *SPIx)
	Disable DMA Rx.
__STATIC_INLINE uint32_t	LL_SPI_IsEnabledDMAReq_RX (SPI_TypeDef *SPIx)
	Check if DMA Rx is enabled.
__STATIC_INLINE void	LL_SPI_EnableDMAReq_TX (SPI_TypeDef *SPIx)
	Enable DMA Tx.
__STATIC_INLINE void	LL_SPI_DisableDMAReq_TX (SPI_TypeDef *SPIx)
	Disable DMA Tx.
__STATIC_INLINE uint32_t	LL_SPI_IsEnabledDMAReq_TX (SPI_TypeDef *SPIx)
	Check if DMA Tx is enabled.
__STATIC_INLINE uint32_t	LL_SPI_DMA_GetRegAddr (SPI_TypeDef *SPIx)
	Get the data register address used for DMA transfer.
__STATIC_INLINE uint8_t	LL_SPI_ReceiveData8 (SPI_TypeDef *SPIx)
	Read 8-Bits in the data register.
__STATIC_INLINE uint16_t	LL_SPI_ReceiveData16 (SPI_TypeDef *SPIx)
	Read 16-Bits in the data register.
__STATIC_INLINE void	LL_SPI_TransmitData8 (SPI_TypeDef *SPIx, uint8_t TxData)
	Write 8-Bits in the data register.
__STATIC_INLINE void	LL_SPI_TransmitData16 (SPI_TypeDef *SPIx, uint16_t TxData)
	Write 16-Bits in the data register.
ErrorStatus	LL_SPI_DeInit (SPI_TypeDef *SPIx)
	De-initialize the SPI registers to their default reset values.
ErrorStatus	LL_SPI_Init (SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct)
	Initialize the SPI registers according to the specified parameters in SPI_InitStruct.
void	LL_SPI_StructInit (LL_SPI_InitTypeDef *SPI_InitStruct)
	Set each LL_SPI_InitTypeDef field to default value.
__STATIC_INLINE void	LL_I2S_Enable (SPI_TypeDef *SPIx)
	Select I2S mode and Enable I2S peripheral.
__STATIC_INLINE void	LL_I2S_Disable (SPI_TypeDef *SPIx)
	Disable I2S peripheral.
__STATIC_INLINE uint32_t	LL_I2S_IsEnabled (SPI_TypeDef *SPIx)
	Check if I2S peripheral is enabled.
__STATIC_INLINE void	LL_I2S_SetDataFormat (SPI_TypeDef *SPIx, uint32_t DataFormat)
	Set I2S data frame length.
__STATIC_INLINE uint32_t	LL_I2S_GetDataFormat (SPI_TypeDef *SPIx)
	Get I2S data frame length.
__STATIC_INLINE void	LL_I2S_SetClockPolarity (SPI_TypeDef *SPIx, uint32_t ClockPolarity)
	Set I2S clock polarity.
__STATIC_INLINE uint32_t	LL_I2S_GetClockPolarity (SPI_TypeDef *SPIx)
	Get I2S clock polarity.
__STATIC_INLINE void	LL_I2S_SetStandard (SPI_TypeDef *SPIx, uint32_t Standard)
	Set I2S standard protocol.
__STATIC_INLINE uint32_t	LL_I2S_GetStandard (SPI_TypeDef *SPIx)
	Get I2S standard protocol.
__STATIC_INLINE void	LL_I2S_SetTransferMode (SPI_TypeDef *SPIx, uint32_t Mode)
	Set I2S transfer mode.
__STATIC_INLINE uint32_t	LL_I2S_GetTransferMode (SPI_TypeDef *SPIx)
	Get I2S transfer mode.
__STATIC_INLINE void	LL_I2S_SetPrescalerLinear (SPI_TypeDef *SPIx, uint8_t PrescalerLinear)
	Set I2S linear prescaler.
__STATIC_INLINE uint32_t	LL_I2S_GetPrescalerLinear (SPI_TypeDef *SPIx)
	Get I2S linear prescaler.
__STATIC_INLINE void	LL_I2S_SetPrescalerParity (SPI_TypeDef *SPIx, uint32_t PrescalerParity)
	Set I2S parity prescaler.
__STATIC_INLINE uint32_t	LL_I2S_GetPrescalerParity (SPI_TypeDef *SPIx)
	Get I2S parity prescaler.
__STATIC_INLINE void	LL_I2S_EnableMasterClock (SPI_TypeDef *SPIx)
	Enable the master clock output (Pin MCK)
__STATIC_INLINE void	LL_I2S_DisableMasterClock (SPI_TypeDef *SPIx)
	Disable the master clock output (Pin MCK)
__STATIC_INLINE uint32_t	LL_I2S_IsEnabledMasterClock (SPI_TypeDef *SPIx)
	Check if the master clock output (Pin MCK) is enabled.
__STATIC_INLINE void	LL_I2S_EnableAsyncStart (SPI_TypeDef *SPIx)
	Enable asynchronous start.
__STATIC_INLINE void	LL_I2S_DisableAsyncStart (SPI_TypeDef *SPIx)
	Disable asynchronous start.
__STATIC_INLINE uint32_t	LL_I2S_IsEnabledAsyncStart (SPI_TypeDef *SPIx)
	Check if asynchronous start is enabled.
__STATIC_INLINE uint32_t	LL_I2S_IsActiveFlag_RXNE (SPI_TypeDef *SPIx)
	Check if Rx buffer is not empty.
__STATIC_INLINE uint32_t	LL_I2S_IsActiveFlag_TXE (SPI_TypeDef *SPIx)
	Check if Tx buffer is empty.
__STATIC_INLINE uint32_t	LL_I2S_IsActiveFlag_BSY (SPI_TypeDef *SPIx)
	Get busy flag.
__STATIC_INLINE uint32_t	LL_I2S_IsActiveFlag_OVR (SPI_TypeDef *SPIx)
	Get overrun error flag.
__STATIC_INLINE uint32_t	LL_I2S_IsActiveFlag_UDR (SPI_TypeDef *SPIx)
	Get underrun error flag.
__STATIC_INLINE uint32_t	LL_I2S_IsActiveFlag_FRE (SPI_TypeDef *SPIx)
	Get frame format error flag.
__STATIC_INLINE uint32_t	LL_I2S_IsActiveFlag_CHSIDE (SPI_TypeDef *SPIx)
	Get channel side flag.
__STATIC_INLINE void	LL_I2S_ClearFlag_OVR (SPI_TypeDef *SPIx)
	Clear overrun error flag.
__STATIC_INLINE void	LL_I2S_ClearFlag_UDR (SPI_TypeDef *SPIx)
	Clear underrun error flag.
__STATIC_INLINE void	LL_I2S_ClearFlag_FRE (SPI_TypeDef *SPIx)
	Clear frame format error flag.
__STATIC_INLINE void	LL_I2S_EnableIT_ERR (SPI_TypeDef *SPIx)
	Enable error IT.
__STATIC_INLINE void	LL_I2S_EnableIT_RXNE (SPI_TypeDef *SPIx)
	Enable Rx buffer not empty IT.
__STATIC_INLINE void	LL_I2S_EnableIT_TXE (SPI_TypeDef *SPIx)
	Enable Tx buffer empty IT.
__STATIC_INLINE void	LL_I2S_DisableIT_ERR (SPI_TypeDef *SPIx)
	Disable error IT.
__STATIC_INLINE void	LL_I2S_DisableIT_RXNE (SPI_TypeDef *SPIx)
	Disable Rx buffer not empty IT.
__STATIC_INLINE void	LL_I2S_DisableIT_TXE (SPI_TypeDef *SPIx)
	Disable Tx buffer empty IT.
__STATIC_INLINE uint32_t	LL_I2S_IsEnabledIT_ERR (SPI_TypeDef *SPIx)
	Check if ERR IT is enabled.
__STATIC_INLINE uint32_t	LL_I2S_IsEnabledIT_RXNE (SPI_TypeDef *SPIx)
	Check if RXNE IT is enabled.
__STATIC_INLINE uint32_t	LL_I2S_IsEnabledIT_TXE (SPI_TypeDef *SPIx)
	Check if TXE IT is enabled.
__STATIC_INLINE void	LL_I2S_EnableDMAReq_RX (SPI_TypeDef *SPIx)
	Enable DMA Rx.
__STATIC_INLINE void	LL_I2S_DisableDMAReq_RX (SPI_TypeDef *SPIx)
	Disable DMA Rx.
__STATIC_INLINE uint32_t	LL_I2S_IsEnabledDMAReq_RX (SPI_TypeDef *SPIx)
	Check if DMA Rx is enabled.
__STATIC_INLINE void	LL_I2S_EnableDMAReq_TX (SPI_TypeDef *SPIx)
	Enable DMA Tx.
__STATIC_INLINE void	LL_I2S_DisableDMAReq_TX (SPI_TypeDef *SPIx)
	Disable DMA Tx.
__STATIC_INLINE uint32_t	LL_I2S_IsEnabledDMAReq_TX (SPI_TypeDef *SPIx)
	Check if DMA Tx is enabled.
__STATIC_INLINE uint16_t	LL_I2S_ReceiveData16 (SPI_TypeDef *SPIx)
	Read 16-Bits in data register.
__STATIC_INLINE void	LL_I2S_TransmitData16 (SPI_TypeDef *SPIx, uint16_t TxData)
	Write 16-Bits in data register.
ErrorStatus	LL_I2S_DeInit (SPI_TypeDef *SPIx)
	De-initialize the SPI/I2S registers to their default reset values.
ErrorStatus	LL_I2S_Init (SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct)
	Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct.
void	LL_I2S_StructInit (LL_I2S_InitTypeDef *I2S_InitStruct)
	Set each LL_I2S_InitTypeDef field to default value.
void	LL_I2S_ConfigPrescaler (SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity)
	Set linear and parity prescaler.
ErrorStatus	LL_I2S_InitFullDuplex (SPI_TypeDef *I2Sxext, LL_I2S_InitTypeDef *I2S_InitStruct)
	Configures the full duplex mode for the I2Sx peripheral using its extension I2Sxext according to the specified parameters in the I2S_InitStruct.

---

Detailed Description

Header file of SPI LL module.

Author:

MCD Application Team

Attention:

© Copyright (c) 2016 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Definition in file stm32f4xx_ll_spi.h.