STM32L443xx HAL User Manual: stm32l4xx_hal

USART HAL module driver. This file provides firmware functions to manage the following functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter Peripheral (USART). + Initialization and de-initialization functions + IO operation functions + Peripheral Control functions + Peripheral State and Error functions. More...

#include "stm32l4xx_hal.h"

Go to the source code of this file.

Defines
#define	USART_DUMMY_DATA ((uint16_t) 0xFFFF)
#define	USART_TEACK_REACK_TIMEOUT 1000U
#define	USART_CR1_FIELDS
#define	USART_CR2_FIELDS
#define	USART_BRR_MIN 0x10U /* USART BRR minimum authorized value */
#define	USART_BRR_MAX 0xFFFFU /* USART BRR maximum authorized value */
Functions
void	USART_InitCallbacksToDefault (USART_HandleTypeDef *husart)
	Initialize the callbacks to their default values.
static void	USART_EndTransfer (USART_HandleTypeDef *husart)
	End ongoing transfer on USART peripheral (following error detection or Transfer completion).
static void	USART_DMATransmitCplt (DMA_HandleTypeDef *hdma)
	DMA USART transmit process complete callback.
static void	USART_DMAReceiveCplt (DMA_HandleTypeDef *hdma)
	DMA USART receive process complete callback.
static void	USART_DMATxHalfCplt (DMA_HandleTypeDef *hdma)
	DMA USART transmit process half complete callback.
static void	USART_DMARxHalfCplt (DMA_HandleTypeDef *hdma)
	DMA USART receive process half complete callback.
static void	USART_DMAError (DMA_HandleTypeDef *hdma)
	DMA USART communication error callback.
static void	USART_DMAAbortOnError (DMA_HandleTypeDef *hdma)
	DMA USART communication abort callback, when initiated by HAL services on Error (To be called at end of DMA Abort procedure following error occurrence).
static void	USART_DMATxAbortCallback (DMA_HandleTypeDef *hdma)
	DMA USART Tx communication abort callback, when initiated by user (To be called at end of DMA Tx Abort procedure following user abort request).
static void	USART_DMARxAbortCallback (DMA_HandleTypeDef *hdma)
	DMA USART Rx communication abort callback, when initiated by user (To be called at end of DMA Rx Abort procedure following user abort request).
static HAL_StatusTypeDef	USART_WaitOnFlagUntilTimeout (USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
	Handle USART Communication Timeout.
static HAL_StatusTypeDef	USART_SetConfig (USART_HandleTypeDef *husart)
	Configure the USART peripheral.
static HAL_StatusTypeDef	USART_CheckIdleState (USART_HandleTypeDef *husart)
	Check the USART Idle State.
static void	USART_TxISR_8BIT (USART_HandleTypeDef *husart)
	Simplex send an amount of data in non-blocking mode.
static void	USART_TxISR_16BIT (USART_HandleTypeDef *husart)
	Simplex send an amount of data in non-blocking mode.
static void	USART_EndTransmit_IT (USART_HandleTypeDef *husart)
	Wraps up transmission in non-blocking mode.
static void	USART_RxISR_8BIT (USART_HandleTypeDef *husart)
	Simplex receive an amount of data in non-blocking mode.
static void	USART_RxISR_16BIT (USART_HandleTypeDef *husart)
	Simplex receive an amount of data in non-blocking mode.
HAL_StatusTypeDef	HAL_USART_Init (USART_HandleTypeDef *husart)
	Initialize the USART mode according to the specified parameters in the USART_InitTypeDef and initialize the associated handle.
HAL_StatusTypeDef	HAL_USART_DeInit (USART_HandleTypeDef *husart)
	DeInitialize the USART peripheral.
__weak void	HAL_USART_MspInit (USART_HandleTypeDef *husart)
	Initialize the USART MSP.
__weak void	HAL_USART_MspDeInit (USART_HandleTypeDef *husart)
	DeInitialize the USART MSP.
HAL_StatusTypeDef	HAL_USART_RegisterCallback (USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, pUSART_CallbackTypeDef pCallback)
	Register a User USART Callback To be used instead of the weak predefined callback.
HAL_StatusTypeDef	HAL_USART_UnRegisterCallback (USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID)
	Unregister an USART Callback USART callaback is redirected to the weak predefined callback.
HAL_StatusTypeDef	HAL_USART_Transmit (USART_HandleTypeDef husart, const uint8_t pTxData, uint16_t Size, uint32_t Timeout)
	Simplex send an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_USART_Receive (USART_HandleTypeDef husart, uint8_t pRxData, uint16_t Size, uint32_t Timeout)
	Receive an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_USART_TransmitReceive (USART_HandleTypeDef husart, const uint8_t pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
	Full-Duplex Send and Receive an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_USART_Transmit_IT (USART_HandleTypeDef husart, const uint8_t pTxData, uint16_t Size)
	Send an amount of data in interrupt mode.
HAL_StatusTypeDef	HAL_USART_Receive_IT (USART_HandleTypeDef husart, uint8_t pRxData, uint16_t Size)
	Receive an amount of data in interrupt mode.
HAL_StatusTypeDef	HAL_USART_TransmitReceive_IT (USART_HandleTypeDef husart, const uint8_t pTxData, uint8_t *pRxData, uint16_t Size)
	Full-Duplex Send and Receive an amount of data in interrupt mode.
HAL_StatusTypeDef	HAL_USART_Transmit_DMA (USART_HandleTypeDef husart, const uint8_t pTxData, uint16_t Size)
	Send an amount of data in DMA mode.
HAL_StatusTypeDef	HAL_USART_Receive_DMA (USART_HandleTypeDef husart, uint8_t pRxData, uint16_t Size)
	Receive an amount of data in DMA mode.
HAL_StatusTypeDef	HAL_USART_TransmitReceive_DMA (USART_HandleTypeDef husart, const uint8_t pTxData, uint8_t *pRxData, uint16_t Size)
	Full-Duplex Transmit Receive an amount of data in non-blocking mode.
HAL_StatusTypeDef	HAL_USART_DMAPause (USART_HandleTypeDef *husart)
	Pause the DMA Transfer.
HAL_StatusTypeDef	HAL_USART_DMAResume (USART_HandleTypeDef *husart)
	Resume the DMA Transfer.
HAL_StatusTypeDef	HAL_USART_DMAStop (USART_HandleTypeDef *husart)
	Stop the DMA Transfer.
HAL_StatusTypeDef	HAL_USART_Abort (USART_HandleTypeDef *husart)
	Abort ongoing transfers (blocking mode).
HAL_StatusTypeDef	HAL_USART_Abort_IT (USART_HandleTypeDef *husart)
	Abort ongoing transfers (Interrupt mode).
void	HAL_USART_IRQHandler (USART_HandleTypeDef *husart)
	Handle USART interrupt request.
__weak void	HAL_USART_TxCpltCallback (USART_HandleTypeDef *husart)
	Tx Transfer completed callback.
__weak void	HAL_USART_TxHalfCpltCallback (USART_HandleTypeDef *husart)
	Tx Half Transfer completed callback.
__weak void	HAL_USART_RxCpltCallback (USART_HandleTypeDef *husart)
	Rx Transfer completed callback.
__weak void	HAL_USART_RxHalfCpltCallback (USART_HandleTypeDef *husart)
	Rx Half Transfer completed callback.
__weak void	HAL_USART_TxRxCpltCallback (USART_HandleTypeDef *husart)
	Tx/Rx Transfers completed callback for the non-blocking process.
__weak void	HAL_USART_ErrorCallback (USART_HandleTypeDef *husart)
	USART error callback.
__weak void	HAL_USART_AbortCpltCallback (USART_HandleTypeDef *husart)
	USART Abort Complete callback.
HAL_USART_StateTypeDef	HAL_USART_GetState (USART_HandleTypeDef *husart)
	Return the USART handle state.
uint32_t	HAL_USART_GetError (USART_HandleTypeDef *husart)
	Return the USART error code.

Detailed Description

Author:: MCD Application Team

Attention:

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.

 ===============================================================================
                        ##### How to use this driver #####
 ===============================================================================
    [..]
      The USART HAL driver can be used as follows:

      (#) Declare a USART_HandleTypeDef handle structure (eg. USART_HandleTypeDef husart).
      (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API:
          (++) Enable the USARTx interface clock.
          (++) USART pins configuration:
            (+++) Enable the clock for the USART GPIOs.
            (+++) Configure these USART pins as alternate function pull-up.
          (++) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
                HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
            (+++) Configure the USARTx interrupt priority.
            (+++) Enable the NVIC USART IRQ handle.
            (++) USART interrupts handling:
              -@@-   The specific USART interrupts (Transmission complete interrupt,
                  RXNE interrupt and Error Interrupts) will be managed using the macros
                  __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
          (++) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
               HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs):
            (+++) Declare a DMA handle structure for the Tx/Rx channel.
            (+++) Enable the DMAx interface clock.
            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
            (+++) Configure the DMA Tx/Rx channel.
            (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
            (+++) Configure the priority and enable the NVIC for the transfer
                  complete interrupt on the DMA Tx/Rx channel.

      (#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode
          (Receiver/Transmitter) in the husart handle Init structure.

      (#) Initialize the USART registers by calling the HAL_USART_Init() API:
          (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
               by calling the customized HAL_USART_MspInit(&husart) API.

    [..]
     (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's
        HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and
        HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef.

    ##### Callback registration #####
    ==================================

    [..]
    The compilation define USE_HAL_USART_REGISTER_CALLBACKS when set to 1
    allows the user to configure dynamically the driver callbacks.

    [..]
    Use Function HAL_USART_RegisterCallback() to register a user callback.
    Function HAL_USART_RegisterCallback() allows to register following callbacks:
    (+) TxHalfCpltCallback        : Tx Half Complete Callback.
    (+) TxCpltCallback            : Tx Complete Callback.
    (+) RxHalfCpltCallback        : Rx Half Complete Callback.
    (+) RxCpltCallback            : Rx Complete Callback.
    (+) TxRxCpltCallback          : Tx Rx Complete Callback.
    (+) ErrorCallback             : Error Callback.
    (+) AbortCpltCallback         : Abort Complete Callback.
    (+) RxFifoFullCallback        : Rx Fifo Full Callback.
    (+) TxFifoEmptyCallback       : Tx Fifo Empty Callback.
    (+) MspInitCallback           : USART MspInit.
    (+) MspDeInitCallback         : USART MspDeInit.
    This function takes as parameters the HAL peripheral handle, the Callback ID
    and a pointer to the user callback function.

    [..]
    Use function HAL_USART_UnRegisterCallback() to reset a callback to the default
    weak (surcharged) function.
    HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle,
    and the Callback ID.
    This function allows to reset following callbacks:
    (+) TxHalfCpltCallback        : Tx Half Complete Callback.
    (+) TxCpltCallback            : Tx Complete Callback.
    (+) RxHalfCpltCallback        : Rx Half Complete Callback.
    (+) RxCpltCallback            : Rx Complete Callback.
    (+) TxRxCpltCallback          : Tx Rx Complete Callback.
    (+) ErrorCallback             : Error Callback.
    (+) AbortCpltCallback         : Abort Complete Callback.
    (+) RxFifoFullCallback        : Rx Fifo Full Callback.
    (+) TxFifoEmptyCallback       : Tx Fifo Empty Callback.
    (+) MspInitCallback           : USART MspInit.
    (+) MspDeInitCallback         : USART MspDeInit.

    [..]
    By default, after the HAL_USART_Init() and when the state is HAL_USART_STATE_RESET
    all callbacks are set to the corresponding weak (surcharged) functions:
    examples HAL_USART_TxCpltCallback(), HAL_USART_RxHalfCpltCallback().
    Exception done for MspInit and MspDeInit functions that are respectively
    reset to the legacy weak (surcharged) functions in the HAL_USART_Init()
    and HAL_USART_DeInit() only when these callbacks are null (not registered beforehand).
    If not, MspInit or MspDeInit are not null, the HAL_USART_Init() and HAL_USART_DeInit()
    keep and use the user MspInit/MspDeInit callbacks (registered beforehand).

    [..]
    Callbacks can be registered/unregistered in HAL_USART_STATE_READY state only.
    Exception done MspInit/MspDeInit that can be registered/unregistered
    in HAL_USART_STATE_READY or HAL_USART_STATE_RESET state, thus registered (user)
    MspInit/DeInit callbacks can be used during the Init/DeInit.
    In that case first register the MspInit/MspDeInit user callbacks
    using HAL_USART_RegisterCallback() before calling HAL_USART_DeInit()
    or HAL_USART_Init() function.

    [..]
    When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or
    not defined, the callback registration feature is not available
    and weak (surcharged) callbacks are used.

Definition in file stm32l4xx_hal_usart.c.

Defines

Functions

Detailed Description