Initialization and de-initialization functions

Initialization and Configuration functions. More...

Functions
HAL_StatusTypeDef	HAL_UART_Init (UART_HandleTypeDef *huart)
	Initializes the UART mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.
HAL_StatusTypeDef	HAL_HalfDuplex_Init (UART_HandleTypeDef *huart)
	Initializes the half-duplex mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.
HAL_StatusTypeDef	HAL_LIN_Init (UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
	Initializes the LIN mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.
HAL_StatusTypeDef	HAL_MultiProcessor_Init (UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
	Initializes the Multi-Processor mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.
HAL_StatusTypeDef	HAL_UART_DeInit (UART_HandleTypeDef *huart)
	DeInitializes the UART peripheral.
__weak void	HAL_UART_MspInit (UART_HandleTypeDef *huart)
	UART MSP Init.
__weak void	HAL_UART_MspDeInit (UART_HandleTypeDef *huart)
	UART MSP DeInit.
HAL_StatusTypeDef	HAL_UART_RegisterCallback (UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback)
	Register a User UART Callback To be used instead of the weak predefined callback.
HAL_StatusTypeDef	HAL_UART_UnRegisterCallback (UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID)
	Unregister an UART Callback UART callaback is redirected to the weak predefined callback.
HAL_StatusTypeDef	HAL_UART_RegisterRxEventCallback (UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback)
	Register a User UART Rx Event Callback To be used instead of the weak predefined callback.
HAL_StatusTypeDef	HAL_UART_UnRegisterRxEventCallback (UART_HandleTypeDef *huart)
	UnRegister the UART Rx Event Callback UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback.

---

Detailed Description

Initialization and Configuration functions.

 ===============================================================================
            ##### Initialization and Configuration functions #####
 ===============================================================================
    [..]
    This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
    in asynchronous mode.
      (+) For the asynchronous mode only these parameters can be configured:
        (++) Baud Rate
        (++) Word Length
        (++) Stop Bit
        (++) Parity: If the parity is enabled, then the MSB bit of the data written
             in the data register is transmitted but is changed by the parity bit.
             Depending on the frame length defined by the M bit (8-bits or 9-bits),
             please refer to Reference manual for possible UART frame formats.
        (++) Hardware flow control
        (++) Receiver/transmitter modes
        (++) Over Sampling Method
    [..]
    The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs
    follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor configuration
    procedures (details for the procedures are available in reference manuals
    (RM0008 for STM32F10Xxx MCUs and RM0041 for STM32F100xx MCUs)).

---

Function Documentation

HAL_StatusTypeDef HAL_HalfDuplex_Init

(

UART_HandleTypeDef *

huart

)

Initializes the half-duplex mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.

Parameters:

huart

Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified UART module.

Return values:

HAL

status

Definition at line 429 of file stm32f1xx_hal_uart.c.

References __HAL_UART_DISABLE, __HAL_UART_ENABLE, assert_param, __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ERROR_NONE, HAL_UART_MspInit(), HAL_UART_STATE_BUSY, HAL_UART_STATE_READY, HAL_UART_STATE_RESET, __UART_HandleTypeDef::Init, __UART_HandleTypeDef::Instance, IS_UART_WORD_LENGTH, __UART_HandleTypeDef::Lock, __UART_HandleTypeDef::MspInitCallback, UART_InitTypeDef::OverSampling, __UART_HandleTypeDef::RxState, UART_InitCallbacksToDefault(), UART_SetConfig(), and UART_InitTypeDef::WordLength.

HAL_StatusTypeDef HAL_LIN_Init	(	UART_HandleTypeDef *	huart,
		uint32_t	BreakDetectLength
	)

Initializes the LIN mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.

Parameters:

huart	Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified UART module.
BreakDetectLength	Specifies the LIN break detection length. This parameter can be one of the following values: UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection

Return values:

HAL

status

Definition at line 504 of file stm32f1xx_hal_uart.c.

References __HAL_UART_DISABLE, __HAL_UART_ENABLE, assert_param, __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ERROR_NONE, HAL_UART_MspInit(), HAL_UART_STATE_BUSY, HAL_UART_STATE_READY, HAL_UART_STATE_RESET, __UART_HandleTypeDef::Init, __UART_HandleTypeDef::Instance, IS_UART_LIN_BREAK_DETECT_LENGTH, IS_UART_LIN_OVERSAMPLING, IS_UART_LIN_WORD_LENGTH, __UART_HandleTypeDef::Lock, __UART_HandleTypeDef::MspInitCallback, UART_InitTypeDef::OverSampling, __UART_HandleTypeDef::RxState, UART_InitCallbacksToDefault(), UART_SetConfig(), and UART_InitTypeDef::WordLength.

HAL_StatusTypeDef HAL_MultiProcessor_Init	(	UART_HandleTypeDef *	huart,
		uint8_t	Address,
		uint32_t	WakeUpMethod
	)

Initializes the Multi-Processor mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.

Parameters:

huart	Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified UART module.
Address	USART address
WakeUpMethod	specifies the USART wake-up method. This parameter can be one of the following values: UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark

Return values:

HAL

status

Definition at line 587 of file stm32f1xx_hal_uart.c.

References __HAL_UART_DISABLE, __HAL_UART_ENABLE, assert_param, __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ERROR_NONE, HAL_UART_MspInit(), HAL_UART_STATE_BUSY, HAL_UART_STATE_READY, HAL_UART_STATE_RESET, __UART_HandleTypeDef::Init, __UART_HandleTypeDef::Instance, IS_UART_ADDRESS, IS_UART_WAKEUPMETHOD, IS_UART_WORD_LENGTH, __UART_HandleTypeDef::Lock, __UART_HandleTypeDef::MspInitCallback, UART_InitTypeDef::OverSampling, __UART_HandleTypeDef::RxState, UART_InitCallbacksToDefault(), UART_SetConfig(), and UART_InitTypeDef::WordLength.

HAL_StatusTypeDef HAL_UART_DeInit

(

UART_HandleTypeDef *

huart

)

DeInitializes the UART peripheral.

Parameters:

huart

Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified UART module.

Return values:

HAL

status

Definition at line 666 of file stm32f1xx_hal_uart.c.

References __HAL_UART_DISABLE, assert_param, __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ERROR_NONE, HAL_UART_MspDeInit(), HAL_UART_RECEPTION_STANDARD, HAL_UART_STATE_BUSY, HAL_UART_STATE_RESET, __UART_HandleTypeDef::Instance, __UART_HandleTypeDef::MspDeInitCallback, __UART_HandleTypeDef::ReceptionType, and __UART_HandleTypeDef::RxState.

HAL_StatusTypeDef HAL_UART_Init

(

UART_HandleTypeDef *

huart

)

Initializes the UART mode according to the specified parameters in the UART_InitTypeDef and create the associated handle.

Parameters:

huart

Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified UART module.

Return values:

HAL

status

Definition at line 352 of file stm32f1xx_hal_uart.c.

References __HAL_UART_DISABLE, __HAL_UART_ENABLE, assert_param, __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ERROR_NONE, HAL_UART_MspInit(), HAL_UART_STATE_BUSY, HAL_UART_STATE_READY, HAL_UART_STATE_RESET, UART_InitTypeDef::HwFlowCtl, __UART_HandleTypeDef::Init, __UART_HandleTypeDef::Instance, IS_UART_HARDWARE_FLOW_CONTROL, IS_UART_WORD_LENGTH, __UART_HandleTypeDef::Lock, __UART_HandleTypeDef::MspInitCallback, UART_InitTypeDef::OverSampling, __UART_HandleTypeDef::RxState, UART_HWCONTROL_NONE, UART_InitCallbacksToDefault(), UART_SetConfig(), and UART_InitTypeDef::WordLength.

void HAL_UART_MspDeInit

(

UART_HandleTypeDef *

huart

)

UART MSP DeInit.

Parameters:

huart

Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified UART module.

Return values:

None

Definition at line 726 of file stm32f1xx_hal_uart.c.

Referenced by HAL_UART_DeInit(), and HAL_UART_UnRegisterCallback().

void HAL_UART_MspInit

(

UART_HandleTypeDef *

huart

)

UART MSP Init.

Parameters:

huart

Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified UART module.

Return values:

None

Definition at line 711 of file stm32f1xx_hal_uart.c.

Referenced by HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), HAL_UART_Init(), and HAL_UART_UnRegisterCallback().

HAL_StatusTypeDef HAL_UART_RegisterCallback	(	UART_HandleTypeDef *	huart,
		HAL_UART_CallbackIDTypeDef	CallbackID,
		pUART_CallbackTypeDef	pCallback
	)

Register a User UART Callback To be used instead of the weak predefined callback.

Parameters:

huart	uart handle
CallbackID	ID of the callback to be registered This parameter can be one of the following values: HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID HAL_UART_ERROR_CB_ID Error Callback ID HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID HAL_UART_MSPINIT_CB_ID MspInit Callback ID HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID
pCallback	pointer to the Callback function

Return values:

HAL

status

Definition at line 755 of file stm32f1xx_hal_uart.c.

References __UART_HandleTypeDef::AbortCpltCallback, __UART_HandleTypeDef::AbortReceiveCpltCallback, __UART_HandleTypeDef::AbortTransmitCpltCallback, __UART_HandleTypeDef::ErrorCallback, __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ABORT_COMPLETE_CB_ID, HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID, HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID, HAL_UART_ERROR_CB_ID, HAL_UART_ERROR_INVALID_CALLBACK, HAL_UART_MSPDEINIT_CB_ID, HAL_UART_MSPINIT_CB_ID, HAL_UART_RX_COMPLETE_CB_ID, HAL_UART_RX_HALFCOMPLETE_CB_ID, HAL_UART_STATE_READY, HAL_UART_STATE_RESET, HAL_UART_TX_COMPLETE_CB_ID, HAL_UART_TX_HALFCOMPLETE_CB_ID, __UART_HandleTypeDef::MspDeInitCallback, __UART_HandleTypeDef::MspInitCallback, __UART_HandleTypeDef::RxCpltCallback, __UART_HandleTypeDef::RxHalfCpltCallback, __UART_HandleTypeDef::TxCpltCallback, and __UART_HandleTypeDef::TxHalfCpltCallback.

HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback	(	UART_HandleTypeDef *	huart,
		pUART_RxEventCallbackTypeDef	pCallback
	)

Register a User UART Rx Event Callback To be used instead of the weak predefined callback.

Parameters:

huart	Uart handle
pCallback	Pointer to the Rx Event Callback function

Return values:

HAL

status

Definition at line 979 of file stm32f1xx_hal_uart.c.

References __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ERROR_INVALID_CALLBACK, HAL_UART_STATE_READY, and __UART_HandleTypeDef::RxEventCallback.

HAL_StatusTypeDef HAL_UART_UnRegisterCallback	(	UART_HandleTypeDef *	huart,
		HAL_UART_CallbackIDTypeDef	CallbackID
	)

Unregister an UART Callback UART callaback is redirected to the weak predefined callback.

Parameters:

huart

uart handle

CallbackID

ID of the callback to be unregistered This parameter can be one of the following values: HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID HAL_UART_ERROR_CB_ID Error Callback ID HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID HAL_UART_MSPINIT_CB_ID MspInit Callback ID HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID

Return values:

HAL

status

Definition at line 876 of file stm32f1xx_hal_uart.c.

References __UART_HandleTypeDef::AbortCpltCallback, __UART_HandleTypeDef::AbortReceiveCpltCallback, __UART_HandleTypeDef::AbortTransmitCpltCallback, __UART_HandleTypeDef::ErrorCallback, __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ABORT_COMPLETE_CB_ID, HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID, HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID, HAL_UART_AbortCpltCallback(), HAL_UART_AbortReceiveCpltCallback(), HAL_UART_AbortTransmitCpltCallback(), HAL_UART_ERROR_CB_ID, HAL_UART_ERROR_INVALID_CALLBACK, HAL_UART_ErrorCallback(), HAL_UART_MspDeInit(), HAL_UART_MSPDEINIT_CB_ID, HAL_UART_MspInit(), HAL_UART_MSPINIT_CB_ID, HAL_UART_RX_COMPLETE_CB_ID, HAL_UART_RX_HALFCOMPLETE_CB_ID, HAL_UART_RxCpltCallback(), HAL_UART_RxHalfCpltCallback(), HAL_UART_STATE_READY, HAL_UART_STATE_RESET, HAL_UART_TX_COMPLETE_CB_ID, HAL_UART_TX_HALFCOMPLETE_CB_ID, HAL_UART_TxCpltCallback(), HAL_UART_TxHalfCpltCallback(), __UART_HandleTypeDef::MspDeInitCallback, __UART_HandleTypeDef::MspInitCallback, __UART_HandleTypeDef::RxCpltCallback, __UART_HandleTypeDef::RxHalfCpltCallback, __UART_HandleTypeDef::TxCpltCallback, and __UART_HandleTypeDef::TxHalfCpltCallback.

HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback

(

UART_HandleTypeDef *

huart

)

UnRegister the UART Rx Event Callback UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback.

Parameters:

huart

Uart handle

Return values:

HAL

status

Definition at line 1016 of file stm32f1xx_hal_uart.c.

References __UART_HandleTypeDef::ErrorCode, __UART_HandleTypeDef::gState, HAL_UART_ERROR_INVALID_CALLBACK, HAL_UART_STATE_READY, HAL_UARTEx_RxEventCallback(), and __UART_HandleTypeDef::RxEventCallback.