|
STM32F479xx HAL User Manual
|
management functions More...
Functions | |
| HAL_StatusTypeDef | HAL_PCD_DevConnect (PCD_HandleTypeDef *hpcd) |
| Connect the USB device. | |
| HAL_StatusTypeDef | HAL_PCD_DevDisconnect (PCD_HandleTypeDef *hpcd) |
| Disconnect the USB device. | |
| HAL_StatusTypeDef | HAL_PCD_SetAddress (PCD_HandleTypeDef *hpcd, uint8_t address) |
| Set the USB Device address. | |
| HAL_StatusTypeDef | HAL_PCD_EP_Open (PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) |
| Open and configure an endpoint. | |
| HAL_StatusTypeDef | HAL_PCD_EP_Close (PCD_HandleTypeDef *hpcd, uint8_t ep_addr) |
| Deactivate an endpoint. | |
| HAL_StatusTypeDef | HAL_PCD_EP_Receive (PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) |
| Receive an amount of data. | |
| uint32_t | HAL_PCD_EP_GetRxCount (PCD_HandleTypeDef *hpcd, uint8_t ep_addr) |
| Get Received Data Size. | |
| HAL_StatusTypeDef | HAL_PCD_EP_Transmit (PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) |
| Send an amount of data. | |
| HAL_StatusTypeDef | HAL_PCD_EP_SetStall (PCD_HandleTypeDef *hpcd, uint8_t ep_addr) |
| Set a STALL condition over an endpoint. | |
| HAL_StatusTypeDef | HAL_PCD_EP_ClrStall (PCD_HandleTypeDef *hpcd, uint8_t ep_addr) |
| Clear a STALL condition over in an endpoint. | |
| HAL_StatusTypeDef | HAL_PCD_EP_Flush (PCD_HandleTypeDef *hpcd, uint8_t ep_addr) |
| Flush an endpoint. | |
| HAL_StatusTypeDef | HAL_PCD_ActivateRemoteWakeup (PCD_HandleTypeDef *hpcd) |
| Activate remote wakeup signalling. | |
| HAL_StatusTypeDef | HAL_PCD_DeActivateRemoteWakeup (PCD_HandleTypeDef *hpcd) |
| De-activate remote wakeup signalling. | |
management functions
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..]
This subsection provides a set of functions allowing to control the PCD data
transfers.
| HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup | ( | PCD_HandleTypeDef * | hpcd | ) |
Activate remote wakeup signalling.
| hpcd | PCD handle |
| HAL | status |
Definition at line 1986 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::Instance.
| HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup | ( | PCD_HandleTypeDef * | hpcd | ) |
De-activate remote wakeup signalling.
| hpcd | PCD handle |
| HAL | status |
Definition at line 1996 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::Instance.
| HAL_StatusTypeDef HAL_PCD_DevConnect | ( | PCD_HandleTypeDef * | hpcd | ) |
Connect the USB device.
| hpcd | PCD handle |
| HAL | status |
Definition at line 1659 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::Init, and __PCD_HandleTypeDef::Instance.
| HAL_StatusTypeDef HAL_PCD_DevDisconnect | ( | PCD_HandleTypeDef * | hpcd | ) |
Disconnect the USB device.
| hpcd | PCD handle |
| HAL | status |
Definition at line 1682 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::Init, and __PCD_HandleTypeDef::Instance.
| HAL_StatusTypeDef HAL_PCD_EP_Close | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr | ||
| ) |
Deactivate an endpoint.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| HAL | status |
Definition at line 1769 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::IN_ep, __PCD_HandleTypeDef::Instance, and __PCD_HandleTypeDef::OUT_ep.
| HAL_StatusTypeDef HAL_PCD_EP_ClrStall | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr | ||
| ) |
Clear a STALL condition over in an endpoint.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| HAL | status |
Definition at line 1927 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::IN_ep, __PCD_HandleTypeDef::Init, __PCD_HandleTypeDef::Instance, and __PCD_HandleTypeDef::OUT_ep.
| HAL_StatusTypeDef HAL_PCD_EP_Flush | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr | ||
| ) |
Flush an endpoint.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| HAL | status |
Definition at line 1963 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::Instance.
| uint32_t HAL_PCD_EP_GetRxCount | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr | ||
| ) |
Get Received Data Size.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| Data | Size |
Definition at line 1836 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::OUT_ep.
| HAL_StatusTypeDef HAL_PCD_EP_Open | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr, | ||
| uint16_t | ep_mps, | ||
| uint8_t | ep_type | ||
| ) |
Open and configure an endpoint.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| ep_mps | endpoint max packet size |
| ep_type | endpoint type |
| HAL | status |
Definition at line 1724 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::IN_ep, __PCD_HandleTypeDef::Instance, and __PCD_HandleTypeDef::OUT_ep.
| HAL_StatusTypeDef HAL_PCD_EP_Receive | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr, | ||
| uint8_t * | pBuf, | ||
| uint32_t | len | ||
| ) |
Receive an amount of data.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| pBuf | pointer to the reception buffer |
| len | amount of data to be received |
| HAL | status |
Definition at line 1800 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::Init, __PCD_HandleTypeDef::Instance, and __PCD_HandleTypeDef::OUT_ep.
| HAL_StatusTypeDef HAL_PCD_EP_SetStall | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr | ||
| ) |
Set a STALL condition over an endpoint.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| HAL | status |
Definition at line 1884 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::IN_ep, __PCD_HandleTypeDef::Init, __PCD_HandleTypeDef::Instance, __PCD_HandleTypeDef::OUT_ep, and __PCD_HandleTypeDef::Setup.
| HAL_StatusTypeDef HAL_PCD_EP_Transmit | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | ep_addr, | ||
| uint8_t * | pBuf, | ||
| uint32_t | len | ||
| ) |
Send an amount of data.
| hpcd | PCD handle |
| ep_addr | endpoint address |
| pBuf | pointer to the transmission buffer |
| len | amount of data to be sent |
| HAL | status |
Definition at line 1848 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::IN_ep, __PCD_HandleTypeDef::Init, and __PCD_HandleTypeDef::Instance.
| HAL_StatusTypeDef HAL_PCD_SetAddress | ( | PCD_HandleTypeDef * | hpcd, |
| uint8_t | address | ||
| ) |
Set the USB Device address.
| hpcd | PCD handle |
| address | new device address |
| HAL | status |
Definition at line 1707 of file stm32f4xx_hal_pcd.c.
References __PCD_HandleTypeDef::Instance, and __PCD_HandleTypeDef::USB_Address.
1.7.6.1