Defines
#define	__HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_DCE))
	Enable the Coarse calibration process.
#define	__HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
	Disable the Coarse calibration process.
#define	__HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_COE))
	Enable the RTC calibration output.
#define	__HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
	Disable the calibration output.
#define	__HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_REFCKON))
	Enable the clock reference detection.
#define	__HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
	Disable the clock reference detection.
#define	__HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
	Get the selected RTC shift operation's flag status.

Define Documentation

#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))

Disable the calibration output.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 766 of file stm32f4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_DeactivateCalibrationOutPut().

#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))

Enable the RTC calibration output.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 759 of file stm32f4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetCalibrationOutPut().

#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))

Disable the clock reference detection.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 780 of file stm32f4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_DeactivateRefClock().

#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))

Enable the clock reference detection.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 773 of file stm32f4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetRefClock().

#define __HAL_RTC_COARSE_CALIB_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))

Disable the Coarse calibration process.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 752 of file stm32f4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_DeactivateCoarseCalib().

#define __HAL_RTC_COARSE_CALIB_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))

Enable the Coarse calibration process.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 745 of file stm32f4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetCoarseCalib().

#define __HAL_RTC_SHIFT_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)

Get the selected RTC shift operation's flag status.

Parameters:

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC shift operation Flag is pending or not. This parameter can be: RTC_FLAG_SHPF

Return values:

None

Definition at line 790 of file stm32f4xx_hal_rtc_ex.h.

Defines

Define Documentation