DCMI_InitTypeDef Struct Reference

DCMI Init structure definition. More...

#include <stm32f4xx_hal_dcmi_ex.h>

Data Fields
uint32_t	SynchroMode
uint32_t	PCKPolarity
uint32_t	VSPolarity
uint32_t	HSPolarity
uint32_t	CaptureRate
uint32_t	ExtendedDataMode
DCMI_CodesInitTypeDef	SyncroCode
uint32_t	JPEGMode
uint32_t	ByteSelectMode
uint32_t	ByteSelectStart
uint32_t	LineSelectMode
uint32_t	LineSelectStart

---

Detailed Description

DCMI Init structure definition.

Definition at line 63 of file stm32f4xx_hal_dcmi_ex.h.

---

Field Documentation

uint32_t DCMI_InitTypeDef::ByteSelectMode

Specifies the data to be captured by the interface This parameter can be a value of DCMI Byte Select Mode

Definition at line 88 of file stm32f4xx_hal_dcmi_ex.h.

uint32_t DCMI_InitTypeDef::ByteSelectStart

Specifies if the data to be captured by the interface is even or odd This parameter can be a value of DCMI Byte Select Start

Definition at line 91 of file stm32f4xx_hal_dcmi_ex.h.

uint32_t DCMI_InitTypeDef::CaptureRate

Specifies the frequency of frame capture: All, 1/2 or 1/4. This parameter can be a value of DCMI Capture Rate

Definition at line 77 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

uint32_t DCMI_InitTypeDef::ExtendedDataMode

Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. This parameter can be a value of DCMI Extended Data Mode

Definition at line 80 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

uint32_t DCMI_InitTypeDef::HSPolarity

Specifies the Horizontal synchronization polarity: High or Low. This parameter can be a value of DCMI HSYNC Polarity

Definition at line 74 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

uint32_t DCMI_InitTypeDef::JPEGMode

Enable or Disable the JPEG mode This parameter can be a value of DCMI MODE JPEG

Definition at line 85 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

uint32_t DCMI_InitTypeDef::LineSelectMode

Specifies the line of data to be captured by the interface This parameter can be a value of DCMI Line Select Mode

Definition at line 94 of file stm32f4xx_hal_dcmi_ex.h.

uint32_t DCMI_InitTypeDef::LineSelectStart

Specifies if the line of data to be captured by the interface is even or odd This parameter can be a value of DCMI Line Select Start

Definition at line 97 of file stm32f4xx_hal_dcmi_ex.h.

uint32_t DCMI_InitTypeDef::PCKPolarity

Specifies the Pixel clock polarity: Falling or Rising. This parameter can be a value of DCMI PIXCK Polarity

Definition at line 68 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

uint32_t DCMI_InitTypeDef::SynchroMode

Specifies the Synchronization Mode: Hardware or Embedded. This parameter can be a value of DCMI Synchronization Mode

Definition at line 65 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

DCMI_CodesInitTypeDef DCMI_InitTypeDef::SyncroCode

Specifies the code of the frame start delimiter.

Definition at line 83 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

uint32_t DCMI_InitTypeDef::VSPolarity

Specifies the Vertical synchronization polarity: High or Low. This parameter can be a value of DCMI VSYNC Polarity

Definition at line 71 of file stm32f4xx_hal_dcmi_ex.h.

Referenced by HAL_DCMI_Init().

---

The documentation for this struct was generated from the following file:

• stm32f4xx_hal_dcmi_ex.h