#include <stm32f4xx_hal_sai.h>

Data Fields
uint32_t	AudioMode
uint32_t	Synchro
uint32_t	SynchroExt
uint32_t	OutputDrive
uint32_t	NoDivider
uint32_t	FIFOThreshold
uint32_t	ClockSource
uint32_t	AudioFrequency
uint32_t	Mckdiv
uint32_t	MonoStereoMode
uint32_t	CompandingMode
uint32_t	TriState
uint32_t	Protocol
uint32_t	DataSize
uint32_t	FirstBit
uint32_t	ClockStrobing

Detailed Description

Definition at line 70 of file stm32f4xx_hal_sai.h.

Field Documentation

uint32_t SAI_InitTypeDef::AudioFrequency

Specifies the audio frequency sampling. This parameter can be a value of SAI Audio Frequency

Definition at line 104 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init().

uint32_t SAI_InitTypeDef::AudioMode

Specifies the SAI Block audio Mode. This parameter can be a value of SAI Block Mode

Definition at line 72 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), SAI_InitI2S(), SAI_InitPCM(), and SAI_InterruptFlag().

uint32_t SAI_InitTypeDef::ClockSource

Specifies the SAI Block x Clock source. This parameter is not used for STM32F446xx devices.

Definition at line 101 of file stm32f4xx_hal_sai.h.

Referenced by SAI_GetInputClock().

uint32_t SAI_InitTypeDef::ClockStrobing

Specifies the SAI Block clock strobing edge sensitivity. This parameter can be a value of SAI Block Clock Strobing

Definition at line 133 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), SAI_InitI2S(), and SAI_InitPCM().

uint32_t SAI_InitTypeDef::CompandingMode

Specifies the companding mode type. This parameter can be a value of SAI Block Companding Mode

Definition at line 115 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), HAL_SAI_Receive(), HAL_SAI_Receive_IT(), HAL_SAI_Transmit(), HAL_SAI_Transmit_IT(), and SAI_FillFifo().

uint32_t SAI_InitTypeDef::DataSize

Specifies the SAI Block data size. This parameter can be a value of SAI Block Data Size

Definition at line 127 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), HAL_SAI_Receive(), HAL_SAI_Receive_IT(), HAL_SAI_Transmit(), HAL_SAI_Transmit_IT(), SAI_FillFifo(), SAI_InitI2S(), and SAI_InitPCM().

uint32_t SAI_InitTypeDef::FIFOThreshold

Specifies SAI Block FIFO threshold. This parameter can be a value of SAI Block Fifo Threshold

Definition at line 98 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init().

uint32_t SAI_InitTypeDef::FirstBit

Specifies whether data transfers start from MSB or LSB bit. This parameter can be a value of SAI Block MSB LSB transmission

Definition at line 130 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), SAI_InitI2S(), and SAI_InitPCM().

uint32_t SAI_InitTypeDef::Mckdiv

Specifies the master clock divider. This parameter must be a number between Min_Data = 0 and Max_Data = 15.

Note:: This parameter is used only if AudioFrequency is set to SAI_AUDIO_FREQUENCY_MCKDIV otherwise it is internally computed.

Definition at line 107 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init().

uint32_t SAI_InitTypeDef::MonoStereoMode

Specifies if the mono or stereo mode is selected. This parameter can be a value of SAI Mono Stereo Mode

Definition at line 112 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init().

uint32_t SAI_InitTypeDef::NoDivider

Specifies whether master clock will be divided or not. This parameter can be a value of SAI Block NoDivider

Note:: If bit NODIV in the SAI_xCR1 register is cleared, the frame length should be aligned to a number equal to a power of 2, from 8 to 256. If bit NODIV in the SAI_xCR1 register is set, the frame length can take any of the values without constraint since the input clock of the audio block should be equal to the bit clock. There is no MCLK_x clock which can be output.

Definition at line 89 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init().

uint32_t SAI_InitTypeDef::OutputDrive

Specifies when SAI Block outputs are driven. This parameter can be a value of SAI Block Output Drive

Note:: this value has to be set before enabling the audio block but after the audio block configuration.

Definition at line 84 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init().

uint32_t SAI_InitTypeDef::Protocol

Specifies the SAI Block protocol. This parameter can be a value of SAI Block Protocol

Definition at line 124 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), SAI_InitI2S(), SAI_InitPCM(), and SAI_InterruptFlag().

uint32_t SAI_InitTypeDef::Synchro

Specifies SAI Block synchronization This parameter can be a value of SAI Block Synchronization

Definition at line 75 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), and SAI_BlockSynchroConfig().

uint32_t SAI_InitTypeDef::SynchroExt

Specifies SAI external output synchronization, this setup is common for BlockA and BlockB This parameter can be a value of SAI External synchronisation

Note:: : If both audio blocks of same SAI are used, this parameter has to be set to the same value for each audio block

Definition at line 78 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init(), and SAI_BlockSynchroConfig().

uint32_t SAI_InitTypeDef::TriState

Specifies the companding mode type. This parameter can be a value of SAI TRIState Management

Definition at line 118 of file stm32f4xx_hal_sai.h.

Referenced by HAL_SAI_Init().

The documentation for this struct was generated from the following file:

stm32f4xx_hal_sai.h

Data Fields

Detailed Description

Field Documentation