Defines
#define	__HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__)
	Reset CRYP handle state.
#define	__HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= CRYP_CR_CRYPEN)
	Enable/Disable the CRYP peripheral.
#define	__HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN)
#define	CRYP_FLAG_MASK 0x0000001FU
	Check whether the specified CRYP status flag is set or not.
#define	__HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__)
#define	__HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
	Check whether the specified CRYP interrupt is set or not.
#define	__HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) \|= (__INTERRUPT__))
	Enable the CRYP interrupt.
#define	__HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
	Disable the CRYP interrupt.

Define Documentation

#define __HAL_CRYP_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN)

#define __HAL_CRYP_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	(((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))

Disable the CRYP interrupt.

Parameters:

__HANDLE__,:	specifies the CRYP handle.
__INTERRUPT__,:	CRYP Interrupt. This parameter can be one of the following values for CRYP: @ CRYP_IT_INI : Input FIFO service interrupt mask. @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.

Return values:

None

Definition at line 397 of file stm32h7xx_hal_cryp.h.

Referenced by CRYP_AES_IT(), CRYP_GCMCCM_SetHeaderPhase_IT(), CRYP_GCMCCM_SetPayloadPhase_IT(), and CRYP_TDES_IT().

#define __HAL_CRYP_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN)

Enable/Disable the CRYP peripheral.

Parameters:

__HANDLE__,: specifies the CRYP handle.

Return values:

None

Definition at line 343 of file stm32h7xx_hal_cryp.h.

Referenced by CRYP_AES_Decrypt(), CRYP_AES_Decrypt_DMA(), CRYP_AES_Decrypt_IT(), CRYP_AES_Encrypt(), CRYP_AES_Encrypt_IT(), CRYP_AESCCM_Process(), CRYP_AESCCM_Process_DMA(), CRYP_AESCCM_Process_IT(), CRYP_AESGCM_Process(), CRYP_AESGCM_Process_DMA(), CRYP_AESGCM_Process_IT(), CRYP_DMAOutCplt(), CRYP_GCMCCM_SetHeaderPhase(), CRYP_GCMCCM_SetHeaderPhase_DMA(), CRYP_GCMCCM_SetHeaderPhase_IT(), CRYP_GCMCCM_SetPayloadPhase_IT(), CRYP_SetDMAConfig(), CRYP_TDES_Process(), HAL_CRYP_Decrypt_IT(), HAL_CRYP_Encrypt_IT(), HAL_CRYPEx_AESCCM_GenerateAuthTAG(), and HAL_CRYPEx_AESGCM_GenerateAuthTAG().

#define __HAL_CRYP_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	(((__HANDLE__)->Instance->IMSCR) \|= (__INTERRUPT__))

Enable the CRYP interrupt.

Parameters:

__HANDLE__,:	specifies the CRYP handle.
__INTERRUPT__,:	CRYP Interrupt. This parameter can be one of the following values for CRYP: @ CRYP_IT_INI : Input FIFO service interrupt mask. @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.

Return values:

None

Definition at line 385 of file stm32h7xx_hal_cryp.h.

Referenced by CRYP_AES_Decrypt_IT(), CRYP_AES_Encrypt_IT(), CRYP_AESCCM_Process_IT(), CRYP_AESGCM_Process_IT(), CRYP_GCMCCM_SetHeaderPhase_IT(), HAL_CRYP_Decrypt_IT(), and HAL_CRYP_Encrypt_IT().

#define __HAL_CRYP_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)

Value:

((((uint8_t)((__FLAG__) >> 24)) == 0x01U)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
                                                   ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))

Definition at line 361 of file stm32h7xx_hal_cryp.h.

Referenced by CRYP_TDES_IT().

#define __HAL_CRYP_GET_IT	(	__HANDLE__,
		__INTERRUPT__
	)	(((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))

Check whether the specified CRYP interrupt is set or not.

Parameters:

__HANDLE__,:	specifies the CRYP handle.
__INTERRUPT__,:	specifies the interrupt to check. This parameter can be one of the following values for CRYP: CRYP_IT_INI: Input FIFO service masked interrupt status CRYP_IT_OUTI: Output FIFO service masked interrupt status

Return values:

The	state of __INTERRUPT__ (TRUE or FALSE).

Definition at line 373 of file stm32h7xx_hal_cryp.h.

Referenced by CRYP_TDES_IT().

#define __HAL_CRYP_RESET_HANDLE_STATE ( __HANDLE__ )

Value:

do{\
                                                      (__HANDLE__)->State = HAL_CRYP_STATE_RESET;\
                                                      (__HANDLE__)->MspInitCallback = NULL;\
                                                      (__HANDLE__)->MspDeInitCallback = NULL;\
                                                     }while(0)

Reset CRYP handle state.

Parameters:

__HANDLE__ specifies the CRYP handle.

Return values:

None

Definition at line 328 of file stm32h7xx_hal_cryp.h.

#define CRYP_FLAG_MASK 0x0000001FU

Check whether the specified CRYP status flag is set or not.

Parameters:

__FLAG__,:

specifies the flag to check. This parameter can be one of the following values for CRYP:

CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data or a key preparation (for AES decryption).
CRYP_FLAG_IFEM: Input FIFO is empty
CRYP_FLAG_IFNF: Input FIFO is not full
CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
CRYP_FLAG_OFNE: Output FIFO is not empty
CRYP_FLAG_OFFU: Output FIFO is full
CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending

Return values:

The	state of __FLAG__ (TRUE or FALSE).

Definition at line 359 of file stm32h7xx_hal_cryp.h.

Defines

Define Documentation