RTC Time and Date functions

RTC Time and Date functions. More...

Functions
HAL_StatusTypeDef	HAL_RTC_SetTime (RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
	Set RTC current time.
HAL_StatusTypeDef	HAL_RTC_GetTime (RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
	Get RTC current time.
HAL_StatusTypeDef	HAL_RTC_SetDate (RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
	Set RTC current date.
HAL_StatusTypeDef	HAL_RTC_GetDate (RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
	Get RTC current date.

---

Detailed Description

RTC Time and Date functions.

 ===============================================================================
                 ##### RTC Time and Date functions #####
 ===============================================================================

 [..] This section provides functions allowing to configure Time and Date features

---

Function Documentation

HAL_StatusTypeDef HAL_RTC_GetDate	(	RTC_HandleTypeDef *	hrtc,
		RTC_DateTypeDef *	sDate,
		uint32_t	Format
	)

Get RTC current date.

Parameters:

hrtc	RTC handle
sDate	Pointer to Date structure
Format	Specifies the format of the entered parameters. This parameter can be one of the following values: RTC_FORMAT_BIN: Binary data format RTC_FORMAT_BCD: BCD data format

Note:

You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values in the higher-order calendar shadow registers to ensure consistency between the time and date values. Reading RTC current time locks the values in calendar shadow registers until Current date is read.

Return values:

HAL

status

Definition at line 1080 of file stm32h7xx_hal_rtc.c.

References assert_param, RTC_DateTypeDef::Date, __RTC_HandleTypeDef::Instance, IS_RTC_FORMAT, RTC_DateTypeDef::Month, RTC_Bcd2ToByte(), RTC_DR_RESERVED_MASK, RTC_FORMAT_BIN, RTC_DateTypeDef::WeekDay, and RTC_DateTypeDef::Year.

HAL_StatusTypeDef HAL_RTC_GetTime	(	RTC_HandleTypeDef *	hrtc,
		RTC_TimeTypeDef *	sTime,
		uint32_t	Format
	)

Get RTC current time.

Parameters:

hrtc	RTC handle
sTime	Pointer to Time structure with Hours, Minutes and Seconds fields returned with input format (BIN or BCD), also SubSeconds field returning the RTC_SSR register content and SecondFraction field the Synchronous pre-scaler factor to be used for second fraction ratio computation.
Format	Specifies the format of the entered parameters. This parameter can be one of the following values: RTC_FORMAT_BIN: Binary data format RTC_FORMAT_BCD: BCD data format

Note:

You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds value in second fraction ratio with time unit following generic formula: Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS

You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values in the higher-order calendar shadow registers to ensure consistency between the time and date values. Reading RTC current time locks the values in calendar shadow registers until Current date is read to ensure consistency between the time and date values.

Return values:

HAL

status

Definition at line 948 of file stm32h7xx_hal_rtc.c.

References assert_param, RTC_TimeTypeDef::Hours, __RTC_HandleTypeDef::Instance, IS_RTC_FORMAT, RTC_TimeTypeDef::Minutes, RTC_Bcd2ToByte(), RTC_FORMAT_BIN, RTC_TR_RESERVED_MASK, RTC_TimeTypeDef::SecondFraction, RTC_TimeTypeDef::Seconds, RTC_TimeTypeDef::SubSeconds, and RTC_TimeTypeDef::TimeFormat.

HAL_StatusTypeDef HAL_RTC_SetDate	(	RTC_HandleTypeDef *	hrtc,
		RTC_DateTypeDef *	sDate,
		uint32_t	Format
	)

Set RTC current date.

Parameters:

hrtc	RTC handle
sDate	Pointer to date structure
Format	specifies the format of the entered parameters. This parameter can be one of the following values: RTC_FORMAT_BIN: Binary data format RTC_FORMAT_BCD: BCD data format

Return values:

HAL

status

Definition at line 992 of file stm32h7xx_hal_rtc.c.

References __HAL_RTC_WRITEPROTECTION_DISABLE, __HAL_RTC_WRITEPROTECTION_ENABLE, assert_param, RTC_DateTypeDef::Date, HAL_RTC_STATE_BUSY, HAL_RTC_STATE_READY, __RTC_HandleTypeDef::Instance, IS_RTC_DATE, IS_RTC_FORMAT, IS_RTC_MONTH, IS_RTC_WEEKDAY, IS_RTC_YEAR, RTC_DateTypeDef::Month, RTC_Bcd2ToByte(), RTC_ByteToBcd2(), RTC_DR_RESERVED_MASK, RTC_EnterInitMode(), RTC_ExitInitMode(), RTC_FORMAT_BIN, __RTC_HandleTypeDef::State, RTC_DateTypeDef::WeekDay, and RTC_DateTypeDef::Year.

HAL_StatusTypeDef HAL_RTC_SetTime	(	RTC_HandleTypeDef *	hrtc,
		RTC_TimeTypeDef *	sTime,
		uint32_t	Format
	)

Set RTC current time.

Parameters:

hrtc	RTC handle
sTime	Pointer to Time structure
Format	Specifies the format of the entered parameters. This parameter can be one of the following values: RTC_FORMAT_BIN: Binary data format RTC_FORMAT_BCD: BCD data format

Return values:

HAL

status

Definition at line 839 of file stm32h7xx_hal_rtc.c.

References __HAL_RTC_WRITEPROTECTION_DISABLE, __HAL_RTC_WRITEPROTECTION_ENABLE, assert_param, RTC_TimeTypeDef::DayLightSaving, HAL_RTC_STATE_BUSY, HAL_RTC_STATE_READY, RTC_TimeTypeDef::Hours, __RTC_HandleTypeDef::Instance, IS_RTC_DAYLIGHT_SAVING, IS_RTC_FORMAT, IS_RTC_HOUR12, IS_RTC_HOUR24, IS_RTC_HOURFORMAT12, IS_RTC_MINUTES, IS_RTC_SECONDS, IS_RTC_STORE_OPERATION, RTC_TimeTypeDef::Minutes, RTC_Bcd2ToByte(), RTC_ByteToBcd2(), RTC_EnterInitMode(), RTC_ExitInitMode(), RTC_FORMAT_BIN, RTC_TR_RESERVED_MASK, RTC_TimeTypeDef::Seconds, __RTC_HandleTypeDef::State, RTC_TimeTypeDef::StoreOperation, and RTC_TimeTypeDef::TimeFormat.