Defines
#define	__HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR \|= (RTC_CR_WUTE))
	Enable the RTC WakeUp Timer peripheral.
#define	__HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
	Disable the RTC WakeUp Timer peripheral.
#define	__HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR \|= (__INTERRUPT__))
	Enable the RTC WakeUpTimer interrupt.
#define	__HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
	Disable the RTC WakeUpTimer interrupt.
#define	__HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4)) != 0U) ? 1U : 0U)
	Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
#define	__HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)
	Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
#define	__HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)
	Get the selected RTC WakeUpTimer's flag status.
#define	__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
	Clear the RTC Wake Up timers pending flags.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable interrupt on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable interrupt on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable event on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable event on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
	Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE()
	Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE()
	Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Clear the RTC WakeUp Timer associated Exti line flag.
#define	__HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER1 \|= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
	Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.

Define Documentation

#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)	((__HANDLE__)->Instance->ISR) = (~((__FLAG__) \| RTC_ISR_INIT)\|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))

Clear the RTC Wake Up timers pending flags.

Parameters:

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC WakeUpTimer Flag to clear. This parameter can be: RTC_FLAG_WUTF

Return values:

None

Definition at line 783 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_PollForWakeUpTimerEvent(), HAL_RTCEx_SetWakeUpTimer_IT(), and HAL_RTCEx_WakeUpTimerIRQHandler().

#define __HAL_RTC_WAKEUPTIMER_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))

Disable the RTC WakeUp Timer peripheral.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 710 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_DeactivateWakeUpTimer().

#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))

Disable the RTC WakeUpTimer interrupt.

Parameters:

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC WakeUpTimer interrupt sources to be disabled. This parameter can be: RTC_IT_WUT WakeUpTimer interrupt

Return values:

None

Definition at line 730 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_DeactivateWakeUpTimer().

#define __HAL_RTC_WAKEUPTIMER_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))

Enable the RTC WakeUp Timer peripheral.

Parameters:

__HANDLE__ specifies the RTC handle.

Return values:

None

Definition at line 703 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetWakeUpTimer_IT().

#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->CR \|= (__INTERRUPT__))

Enable the RTC WakeUpTimer interrupt.

Parameters:

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC WakeUpTimer interrupt sources to be enabled. This parameter can be: RTC_IT_WUT WakeUpTimer interrupt

Return values:

None

Definition at line 720 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetWakeUpTimer_IT().

#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG ( ) (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Clear the RTC WakeUp Timer associated Exti line flag.

Return values:

None

Definition at line 866 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_WakeUpTimerIRQHandler().

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT ( ) (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable event on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 811 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE ( ) (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 823 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT ( ) (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable interrupt on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 799 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE ( ) (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))

Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 835 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE ( )

Value:

do { \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();  \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \
                                                                  } while(0)

Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.

This parameter can be:

Return values:

None

Definition at line 851 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT ( ) (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable event on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 805 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetWakeUpTimer_IT().

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE ( ) (EXTI->FTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 817 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT ( ) (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable interrupt on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 793 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetWakeUpTimer_IT().

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE ( ) (EXTI->RTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 829 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_SetWakeUpTimer_IT().

#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE ( )

Value:

do { \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();  \
                                                                   __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \
                                                                 } while(0)

Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 841 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT ( ) (EXTI->SWIER1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.

Return values:

None

Definition at line 872 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG ( ) (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)

Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.

Return values:

Line Status.

Definition at line 860 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U)

Get the selected RTC WakeUpTimer's flag status.

Parameters:

__HANDLE__	specifies the RTC handle.
__FLAG__	specifies the RTC WakeUpTimer Flag is pending or not. This parameter can be: RTC_FLAG_WUTF RTC_FLAG_WUTWF

Return values:

Flag status

Definition at line 769 of file stm32l4xx_hal_rtc_ex.h.

Referenced by HAL_RTCEx_DeactivateWakeUpTimer(), HAL_RTCEx_PollForWakeUpTimerEvent(), and HAL_RTCEx_WakeUpTimerIRQHandler().

#define __HAL_RTC_WAKEUPTIMER_GET_IT	(	__HANDLE__,
		__INTERRUPT__
	)	(((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4)) != 0U) ? 1U : 0U)

Check whether the specified RTC WakeUpTimer interrupt has occurred or not.

Parameters:

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC WakeUpTimer interrupt sources to check. This parameter can be: RTC_IT_WUT WakeUpTimer interrupt

Return values:

None

Definition at line 744 of file stm32l4xx_hal_rtc_ex.h.

#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)	(((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U)

Check whether the specified RTC Wake Up timer interrupt has been enabled or not.

Parameters:

__HANDLE__	specifies the RTC handle.
__INTERRUPT__	specifies the RTC Wake Up timer interrupt sources to check. This parameter can be: RTC_IT_WUT WakeUpTimer interrupt

Return values:

None

Definition at line 755 of file stm32l4xx_hal_rtc_ex.h.

Defines

Define Documentation