LL_ADC_REG_InitTypeDef Struct Reference

Structure definition of some features of ADC group regular. More...

#include <stm32l4xx_ll_adc.h>

Data Fields
uint32_t	TriggerSource
uint32_t	SequencerLength
uint32_t	SequencerDiscont
uint32_t	ContinuousMode
uint32_t	DMATransfer
uint32_t	Overrun

---

Detailed Description

Structure definition of some features of ADC group regular.

Note:

These parameters have an impact on ADC scope: ADC group regular. Refer to corresponding unitary functions into Configuration of ADC hierarchical scope: group regular (functions with prefix "REG").

The setting of these parameters by function LL_ADC_REG_Init() is conditioned to ADC state: ADC instance must be disabled. This condition is applied to all ADC features, for efficiency and compatibility over all STM32 families. However, the different features can be set under different ADC state conditions (setting possible with ADC enabled without conversion on going, ADC enabled with conversion on going, ...) Each feature can be updated afterwards with a unitary function and potentially with ADC in a different state than disabled, refer to description of each function for setting conditioned to ADC state.

Definition at line 487 of file stm32l4xx_ll_adc.h.

---

Field Documentation

uint32_t LL_ADC_REG_InitTypeDef::ContinuousMode

Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically). This parameter can be a value of ADC group regular - Continuous mode Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode.

This feature can be modified afterwards using unitary function LL_ADC_REG_SetContinuousMode().

Definition at line 509 of file stm32l4xx_ll_adc.h.

Referenced by LL_ADC_REG_Init(), and LL_ADC_REG_StructInit().

uint32_t LL_ADC_REG_InitTypeDef::DMATransfer

Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode. This parameter can be a value of ADC group regular - DMA transfer of ADC conversion data

This feature can be modified afterwards using unitary function LL_ADC_REG_SetDMATransfer().

Definition at line 515 of file stm32l4xx_ll_adc.h.

Referenced by LL_ADC_REG_Init(), and LL_ADC_REG_StructInit().

uint32_t LL_ADC_REG_InitTypeDef::Overrun

Set ADC group regular behavior in case of overrun: data preserved or overwritten. This parameter can be a value of ADC group regular - Overrun behavior on conversion data

This feature can be modified afterwards using unitary function LL_ADC_REG_SetOverrun().

Definition at line 520 of file stm32l4xx_ll_adc.h.

Referenced by LL_ADC_REG_Init(), and LL_ADC_REG_StructInit().

uint32_t LL_ADC_REG_InitTypeDef::SequencerDiscont

Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks. This parameter can be a value of ADC group regular - Sequencer discontinuous mode

Note:

This parameter has an effect only if group regular sequencer is enabled (scan length of 2 ranks or more).

This feature can be modified afterwards using unitary function LL_ADC_REG_SetSequencerDiscont().

Definition at line 502 of file stm32l4xx_ll_adc.h.

Referenced by LL_ADC_REG_Init(), and LL_ADC_REG_StructInit().

uint32_t LL_ADC_REG_InitTypeDef::SequencerLength

Set ADC group regular sequencer length. This parameter can be a value of ADC group regular - Sequencer scan length

This feature can be modified afterwards using unitary function LL_ADC_REG_SetSequencerLength().

Definition at line 497 of file stm32l4xx_ll_adc.h.

Referenced by LL_ADC_REG_Init(), and LL_ADC_REG_StructInit().

uint32_t LL_ADC_REG_InitTypeDef::TriggerSource

Set ADC group regular conversion trigger source: internal (SW start) or from external peripheral (timer event, external interrupt line). This parameter can be a value of ADC group regular - Trigger source

Note:

On this STM32 series, setting trigger source to external trigger also set trigger polarity to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value). In case of need to modify trigger edge, use function LL_ADC_REG_SetTriggerEdge().

This feature can be modified afterwards using unitary function LL_ADC_REG_SetTriggerSource().

Definition at line 489 of file stm32l4xx_ll_adc.h.

Referenced by LL_ADC_REG_Init(), and LL_ADC_REG_StructInit().

---

The documentation for this struct was generated from the following file:

• stm32l4xx_ll_adc.h