IRDA Transmit and Receive functions. More...

Functions
HAL_StatusTypeDef	HAL_IRDA_Transmit (IRDA_HandleTypeDef hirda, uint8_t pData, uint16_t Size, uint32_t Timeout)
	Sends an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_IRDA_Receive (IRDA_HandleTypeDef hirda, uint8_t pData, uint16_t Size, uint32_t Timeout)
	Receive an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_IRDA_Transmit_IT (IRDA_HandleTypeDef hirda, uint8_t pData, uint16_t Size)
	Send an amount of data in non blocking mode.
HAL_StatusTypeDef	HAL_IRDA_Receive_IT (IRDA_HandleTypeDef hirda, uint8_t pData, uint16_t Size)
	Receive an amount of data in non blocking mode.
HAL_StatusTypeDef	HAL_IRDA_Transmit_DMA (IRDA_HandleTypeDef hirda, uint8_t pData, uint16_t Size)
	Send an amount of data in DMA mode.
HAL_StatusTypeDef	HAL_IRDA_Receive_DMA (IRDA_HandleTypeDef hirda, uint8_t pData, uint16_t Size)
	Receives an amount of data in DMA mode.
HAL_StatusTypeDef	HAL_IRDA_DMAPause (IRDA_HandleTypeDef *hirda)
	Pauses the DMA Transfer.
HAL_StatusTypeDef	HAL_IRDA_DMAResume (IRDA_HandleTypeDef *hirda)
	Resumes the DMA Transfer.
HAL_StatusTypeDef	HAL_IRDA_DMAStop (IRDA_HandleTypeDef *hirda)
	Stops the DMA Transfer.
HAL_StatusTypeDef	HAL_IRDA_Abort (IRDA_HandleTypeDef *hirda)
	Abort ongoing transfers (blocking mode).
HAL_StatusTypeDef	HAL_IRDA_AbortTransmit (IRDA_HandleTypeDef *hirda)
	Abort ongoing Transmit transfer (blocking mode).
HAL_StatusTypeDef	HAL_IRDA_AbortReceive (IRDA_HandleTypeDef *hirda)
	Abort ongoing Receive transfer (blocking mode).
HAL_StatusTypeDef	HAL_IRDA_Abort_IT (IRDA_HandleTypeDef *hirda)
	Abort ongoing transfers (Interrupt mode).
HAL_StatusTypeDef	HAL_IRDA_AbortTransmit_IT (IRDA_HandleTypeDef *hirda)
	Abort ongoing Transmit transfer (Interrupt mode).
HAL_StatusTypeDef	HAL_IRDA_AbortReceive_IT (IRDA_HandleTypeDef *hirda)
	Abort ongoing Receive transfer (Interrupt mode).
void	HAL_IRDA_IRQHandler (IRDA_HandleTypeDef *hirda)
	This function handles IRDA interrupt request.
__weak void	HAL_IRDA_TxCpltCallback (IRDA_HandleTypeDef *hirda)
	Tx Transfer complete callback.
__weak void	HAL_IRDA_TxHalfCpltCallback (IRDA_HandleTypeDef *hirda)
	Tx Half Transfer completed callback.
__weak void	HAL_IRDA_RxCpltCallback (IRDA_HandleTypeDef *hirda)
	Rx Transfer complete callback.
__weak void	HAL_IRDA_RxHalfCpltCallback (IRDA_HandleTypeDef *hirda)
	Rx Half Transfer complete callback.
__weak void	HAL_IRDA_ErrorCallback (IRDA_HandleTypeDef *hirda)
	IRDA error callback.
__weak void	HAL_IRDA_AbortCpltCallback (IRDA_HandleTypeDef *hirda)
	IRDA Abort Complete callback.
__weak void	HAL_IRDA_AbortTransmitCpltCallback (IRDA_HandleTypeDef *hirda)
	IRDA Abort Transmit Complete callback.
__weak void	HAL_IRDA_AbortReceiveCpltCallback (IRDA_HandleTypeDef *hirda)
	IRDA Abort Receive Complete callback.

Detailed Description

IRDA Transmit and Receive functions.

  ==============================================================================
                      ##### IO operation functions #####
  ==============================================================================
    [..]
    This subsection provides a set of functions allowing to manage the IRDA data transfers.
    IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
    on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
    is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
    While receiving data, transmission should be avoided as the data to be transmitted
    could be corrupted.

    (#) There are two modes of transfer:
       (++) Blocking mode: The communication is performed in polling mode.
            The HAL status of all data processing is returned by the same function
            after finishing transfer.
       (++) Non-Blocking mode: The communication is performed using Interrupts
           or DMA, these API's return the HAL status.
           The end of the data processing will be indicated through the
           dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when
           using DMA mode.
           The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks
           will be executed respectively at the end of the Transmit or Receive process
           The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected

    (#) Blocking mode APIs are :
        (++) HAL_IRDA_Transmit()
        (++) HAL_IRDA_Receive()

    (#) Non Blocking mode APIs with Interrupt are :
        (++) HAL_IRDA_Transmit_IT()
        (++) HAL_IRDA_Receive_IT()
        (++) HAL_IRDA_IRQHandler()

    (#) Non Blocking mode functions with DMA are :
        (++) HAL_IRDA_Transmit_DMA()
        (++) HAL_IRDA_Receive_DMA()
        (++) HAL_IRDA_DMAPause()
        (++) HAL_IRDA_DMAResume()
        (++) HAL_IRDA_DMAStop()

    (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode:
        (++) HAL_IRDA_TxHalfCpltCallback()
        (++) HAL_IRDA_TxCpltCallback()
        (++) HAL_IRDA_RxHalfCpltCallback()
        (++) HAL_IRDA_RxCpltCallback()
        (++) HAL_IRDA_ErrorCallback()

    (#) Non-Blocking mode transfers could be aborted using Abort API's :
        (+) HAL_IRDA_Abort()
        (+) HAL_IRDA_AbortTransmit()
        (+) HAL_IRDA_AbortReceive()
        (+) HAL_IRDA_Abort_IT()
        (+) HAL_IRDA_AbortTransmit_IT()
        (+) HAL_IRDA_AbortReceive_IT()

    (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided:
        (+) HAL_IRDA_AbortCpltCallback()
        (+) HAL_IRDA_AbortTransmitCpltCallback()
        (+) HAL_IRDA_AbortReceiveCpltCallback()

    (#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
        Errors are handled as follows :
        (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
            to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
            Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
            and HAL_IRDA_ErrorCallback() user callback is executed. Transfer is kept ongoing on IRDA side.
            If user wants to abort it, Abort services should be called by user.
        (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
            This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode.
            Error code is set to allow user to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed.

Function Documentation

HAL_StatusTypeDef HAL_IRDA_Abort ( IRDA_HandleTypeDef * hirda )

Abort ongoing transfers (blocking mode).

Parameters:

hirda IRDA handle.

Note:

This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. This procedure performs following operations :

Disable PPP Interrupts
Disable the DMA transfer in the peripheral register (if enabled)
Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
Set handle State to READY

This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.

Return values:

HAL status

Definition at line 1298 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::ErrorCode, __IRDA_HandleTypeDef::gState, HAL_DMA_Abort(), HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmarx, __IRDA_HandleTypeDef::hdmatx, __IRDA_HandleTypeDef::Instance, __IRDA_HandleTypeDef::RxState, __IRDA_HandleTypeDef::RxXferCount, __IRDA_HandleTypeDef::TxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

HAL_StatusTypeDef HAL_IRDA_Abort_IT ( IRDA_HandleTypeDef * hirda )

Abort ongoing transfers (Interrupt mode).

Parameters:

hirda IRDA handle.

Note:

This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. This procedure performs following operations :

Disable PPP Interrupts
Disable the DMA transfer in the peripheral register (if enabled)
Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
Set handle State to READY
At abort completion, call user abort complete callback

This procedure is executed in Interrupt mode, meaning that abort procedure could be considered as completed only when user abort complete callback is executed (not when exiting function).

Return values:

HAL status

Definition at line 1449 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::AbortCpltCallback, __IRDA_HandleTypeDef::ErrorCode, __IRDA_HandleTypeDef::gState, HAL_DMA_Abort_IT(), HAL_IRDA_AbortCpltCallback(), HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmarx, __IRDA_HandleTypeDef::hdmatx, __IRDA_HandleTypeDef::Instance, IRDA_DMARxAbortCallback(), IRDA_DMATxAbortCallback(), __IRDA_HandleTypeDef::RxState, __IRDA_HandleTypeDef::RxXferCount, __IRDA_HandleTypeDef::TxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

void HAL_IRDA_AbortCpltCallback ( IRDA_HandleTypeDef * hirda )

IRDA Abort Complete callback.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

None

Definition at line 1949 of file stm32f1xx_hal_irda.c.

Referenced by HAL_IRDA_Abort_IT(), HAL_IRDA_UnRegisterCallback(), IRDA_DMARxAbortCallback(), IRDA_DMATxAbortCallback(), and IRDA_InitCallbacksToDefault().

HAL_StatusTypeDef HAL_IRDA_AbortReceive ( IRDA_HandleTypeDef * hirda )

Abort ongoing Receive transfer (blocking mode).

Parameters:

hirda IRDA handle.

Note:

This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. This procedure performs following operations :

Disable PPP Interrupts
Disable the DMA transfer in the peripheral register (if enabled)
Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
Set handle State to READY

This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.

Return values:

HAL status

Definition at line 1404 of file stm32f1xx_hal_irda.c.

References HAL_DMA_Abort(), HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmarx, __IRDA_HandleTypeDef::Instance, __IRDA_HandleTypeDef::RxState, __IRDA_HandleTypeDef::RxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT ( IRDA_HandleTypeDef * hirda )

Abort ongoing Receive transfer (Interrupt mode).

Parameters:

hirda IRDA handle.

Note:

This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. This procedure performs following operations :

Disable PPP Interrupts
Disable the DMA transfer in the peripheral register (if enabled)
Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
Set handle State to READY
At abort completion, call user abort complete callback

This procedure is executed in Interrupt mode, meaning that abort procedure could be considered as completed only when user abort complete callback is executed (not when exiting function).

Return values:

HAL status

Definition at line 1654 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::AbortReceiveCpltCallback, HAL_DMA_Abort_IT(), HAL_IRDA_AbortReceiveCpltCallback(), HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmarx, __IRDA_HandleTypeDef::Instance, IRDA_DMARxOnlyAbortCallback(), __IRDA_HandleTypeDef::RxState, __IRDA_HandleTypeDef::RxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

void HAL_IRDA_AbortReceiveCpltCallback ( IRDA_HandleTypeDef * hirda )

IRDA Abort Receive Complete callback.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

None

Definition at line 1981 of file stm32f1xx_hal_irda.c.

Referenced by HAL_IRDA_AbortReceive_IT(), HAL_IRDA_UnRegisterCallback(), IRDA_DMARxOnlyAbortCallback(), and IRDA_InitCallbacksToDefault().

HAL_StatusTypeDef HAL_IRDA_AbortTransmit ( IRDA_HandleTypeDef * hirda )

Abort ongoing Transmit transfer (blocking mode).

Parameters:

hirda IRDA handle.

Note:

This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. This procedure performs following operations :

Disable PPP Interrupts
Disable the DMA transfer in the peripheral register (if enabled)
Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
Set handle State to READY

This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.

Return values:

HAL status

Definition at line 1362 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::gState, HAL_DMA_Abort(), HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmatx, __IRDA_HandleTypeDef::Instance, __IRDA_HandleTypeDef::TxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT ( IRDA_HandleTypeDef * hirda )

Abort ongoing Transmit transfer (Interrupt mode).

Parameters:

hirda IRDA handle.

Note:

This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. This procedure performs following operations :

Disable IRDA Interrupts (Tx)
Disable the DMA transfer in the peripheral register (if enabled)
Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
Set handle State to READY
At abort completion, call user abort complete callback

This procedure is executed in Interrupt mode, meaning that abort procedure could be considered as completed only when user abort complete callback is executed (not when exiting function).

Return values:

HAL status

Definition at line 1577 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::AbortTransmitCpltCallback, __IRDA_HandleTypeDef::gState, HAL_DMA_Abort_IT(), HAL_IRDA_AbortTransmitCpltCallback(), HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmatx, __IRDA_HandleTypeDef::Instance, IRDA_DMATxOnlyAbortCallback(), __IRDA_HandleTypeDef::TxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

void HAL_IRDA_AbortTransmitCpltCallback ( IRDA_HandleTypeDef * hirda )

IRDA Abort Transmit Complete callback.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

None

Definition at line 1965 of file stm32f1xx_hal_irda.c.

Referenced by HAL_IRDA_AbortTransmit_IT(), HAL_IRDA_UnRegisterCallback(), IRDA_DMATxOnlyAbortCallback(), and IRDA_InitCallbacksToDefault().

HAL_StatusTypeDef HAL_IRDA_DMAPause ( IRDA_HandleTypeDef * hirda )

Pauses the DMA Transfer.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

HAL status

Definition at line 1173 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::gState, HAL_IRDA_STATE_BUSY_RX, HAL_IRDA_STATE_BUSY_TX, __IRDA_HandleTypeDef::Instance, and __IRDA_HandleTypeDef::RxState.

HAL_StatusTypeDef HAL_IRDA_DMAResume ( IRDA_HandleTypeDef * hirda )

Resumes the DMA Transfer.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

HAL status

Definition at line 1210 of file stm32f1xx_hal_irda.c.

References __HAL_IRDA_CLEAR_OREFLAG, __IRDA_HandleTypeDef::gState, HAL_IRDA_STATE_BUSY_RX, HAL_IRDA_STATE_BUSY_TX, __IRDA_HandleTypeDef::Instance, and __IRDA_HandleTypeDef::RxState.

HAL_StatusTypeDef HAL_IRDA_DMAStop ( IRDA_HandleTypeDef * hirda )

Stops the DMA Transfer.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

HAL status

Definition at line 1246 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::gState, HAL_DMA_Abort(), HAL_IRDA_STATE_BUSY_RX, HAL_IRDA_STATE_BUSY_TX, __IRDA_HandleTypeDef::hdmarx, __IRDA_HandleTypeDef::hdmatx, __IRDA_HandleTypeDef::Instance, IRDA_EndRxTransfer(), IRDA_EndTxTransfer(), and __IRDA_HandleTypeDef::RxState.

void HAL_IRDA_ErrorCallback ( IRDA_HandleTypeDef * hirda )

IRDA error callback.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

None

Definition at line 1933 of file stm32f1xx_hal_irda.c.

Referenced by HAL_IRDA_IRQHandler(), HAL_IRDA_UnRegisterCallback(), IRDA_DMAAbortOnError(), IRDA_DMAError(), and IRDA_InitCallbacksToDefault().

void HAL_IRDA_IRQHandler ( IRDA_HandleTypeDef * hirda )

This function handles IRDA interrupt request.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

None

Definition at line 1724 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::ErrorCallback, __IRDA_HandleTypeDef::ErrorCode, HAL_DMA_Abort_IT(), HAL_IRDA_ERROR_FE, HAL_IRDA_ERROR_NE, HAL_IRDA_ERROR_NONE, HAL_IRDA_ERROR_ORE, HAL_IRDA_ERROR_PE, HAL_IRDA_ErrorCallback(), __IRDA_HandleTypeDef::hdmarx, __IRDA_HandleTypeDef::Instance, IRDA_DMAAbortOnError(), IRDA_EndRxTransfer(), IRDA_EndTransmit_IT(), IRDA_Receive_IT(), IRDA_Transmit_IT(), and __DMA_HandleTypeDef::XferAbortCallback.

HAL_StatusTypeDef HAL_IRDA_Receive	(	IRDA_HandleTypeDef *	hirda,
		uint8_t *	pData,
		uint16_t	Size,
		uint32_t	Timeout
	)

Receive an amount of data in blocking mode.

Note:: When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), the received data is handled as a set of u16. In this case, Size must reflect the number of u16 available through pData.

Parameters:

hirda	Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.
pData	Pointer to data buffer (u8 or u16 data elements).
Size	Amount of data elements (u8 or u16) to be received.
Timeout	Specify timeout value

Return values:

HAL status

Definition at line 855 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::ErrorCode, HAL_GetTick(), HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_BUSY_RX, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::Init, __IRDA_HandleTypeDef::Instance, IRDA_FLAG_RXNE, IRDA_PARITY_NONE, IRDA_WaitOnFlagUntilTimeout(), IRDA_WORDLENGTH_9B, IRDA_InitTypeDef::Parity, __IRDA_HandleTypeDef::RxState, __IRDA_HandleTypeDef::RxXferCount, __IRDA_HandleTypeDef::RxXferSize, and IRDA_InitTypeDef::WordLength.

HAL_StatusTypeDef HAL_IRDA_Receive_DMA	(	IRDA_HandleTypeDef *	hirda,
		uint8_t *	pData,
		uint16_t	Size
	)

Receives an amount of data in DMA mode.

Note:: When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), the received data is handled as a set of u16. In this case, Size must reflect the number of u16 available through pData.

Parameters:

hirda	Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.
pData	Pointer to data buffer (u8 or u16 data elements).
Size	Amount of data elements (u8 or u16) to be received.

Note:: When the IRDA parity is enabled (PCE = 1) the data received contain the parity bit.

Return values:

HAL status

Definition at line 1106 of file stm32f1xx_hal_irda.c.

References __HAL_IRDA_CLEAR_OREFLAG, __IRDA_HandleTypeDef::ErrorCode, HAL_DMA_Start_IT(), HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_BUSY_RX, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmarx, __IRDA_HandleTypeDef::Instance, IRDA_DMAError(), IRDA_DMAReceiveCplt(), IRDA_DMAReceiveHalfCplt(), __IRDA_HandleTypeDef::pRxBuffPtr, __IRDA_HandleTypeDef::RxState, __IRDA_HandleTypeDef::RxXferSize, __DMA_HandleTypeDef::XferAbortCallback, __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

HAL_StatusTypeDef HAL_IRDA_Receive_IT	(	IRDA_HandleTypeDef *	hirda,
		uint8_t *	pData,
		uint16_t	Size
	)

Receive an amount of data in non blocking mode.

Note:: When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), the received data is handled as a set of u16. In this case, Size must reflect the number of u16 available through pData.

Parameters:

hirda	Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.
pData	Pointer to data buffer (u8 or u16 data elements).
Size	Amount of data elements (u8 or u16) to be received.

Return values:

HAL status

Definition at line 990 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::ErrorCode, HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_BUSY_RX, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::Instance, __IRDA_HandleTypeDef::pRxBuffPtr, __IRDA_HandleTypeDef::RxState, __IRDA_HandleTypeDef::RxXferCount, and __IRDA_HandleTypeDef::RxXferSize.

void HAL_IRDA_RxCpltCallback ( IRDA_HandleTypeDef * hirda )

Rx Transfer complete callback.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

None

Definition at line 1901 of file stm32f1xx_hal_irda.c.

Referenced by HAL_IRDA_UnRegisterCallback(), IRDA_DMAReceiveCplt(), IRDA_InitCallbacksToDefault(), and IRDA_Receive_IT().

void HAL_IRDA_RxHalfCpltCallback ( IRDA_HandleTypeDef * hirda )

Rx Half Transfer complete callback.

Parameters:

hirda Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.

Return values:

None

Definition at line 1917 of file stm32f1xx_hal_irda.c.

Referenced by HAL_IRDA_UnRegisterCallback(), IRDA_DMAReceiveHalfCplt(), and IRDA_InitCallbacksToDefault().

HAL_StatusTypeDef HAL_IRDA_Transmit	(	IRDA_HandleTypeDef *	hirda,
		uint8_t *	pData,
		uint16_t	Size,
		uint32_t	Timeout
	)

Sends an amount of data in blocking mode.

Note:: When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), the sent data is handled as a set of u16. In this case, Size must reflect the number of u16 available through pData.

Parameters:

hirda	Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.
pData	Pointer to data buffer (u8 or u16 data elements).
Size	Amount of data elements (u8 or u16) to be sent.
Timeout	Specify timeout value.

Return values:

HAL status

Definition at line 770 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::ErrorCode, __IRDA_HandleTypeDef::gState, HAL_GetTick(), HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_BUSY_TX, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::Init, __IRDA_HandleTypeDef::Instance, IRDA_FLAG_TC, IRDA_FLAG_TXE, IRDA_PARITY_NONE, IRDA_WaitOnFlagUntilTimeout(), IRDA_WORDLENGTH_9B, IRDA_InitTypeDef::Parity, __IRDA_HandleTypeDef::TxXferCount, __IRDA_HandleTypeDef::TxXferSize, and IRDA_InitTypeDef::WordLength.

HAL_StatusTypeDef HAL_IRDA_Transmit_DMA	(	IRDA_HandleTypeDef *	hirda,
		uint8_t *	pData,
		uint16_t	Size
	)

Send an amount of data in DMA mode.

Note:: When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), the sent data is handled as a set of u16. In this case, Size must reflect the number of u16 available through pData.

Parameters:

hirda	Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.
pData	Pointer to data buffer (u8 or u16 data elements).
Size	Amount of data elements (u8 or u16) to be sent.

Return values:

HAL status

Definition at line 1038 of file stm32f1xx_hal_irda.c.

References __HAL_IRDA_CLEAR_FLAG, __IRDA_HandleTypeDef::ErrorCode, __IRDA_HandleTypeDef::gState, HAL_DMA_Start_IT(), HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_BUSY_TX, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::hdmatx, __IRDA_HandleTypeDef::Instance, IRDA_DMAError(), IRDA_DMATransmitCplt(), IRDA_DMATransmitHalfCplt(), IRDA_FLAG_TC, __IRDA_HandleTypeDef::pTxBuffPtr, __IRDA_HandleTypeDef::TxXferCount, __IRDA_HandleTypeDef::TxXferSize, __DMA_HandleTypeDef::XferAbortCallback, __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

HAL_StatusTypeDef HAL_IRDA_Transmit_IT	(	IRDA_HandleTypeDef *	hirda,
		uint8_t *	pData,
		uint16_t	Size
	)

Send an amount of data in non blocking mode.

Note:: When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), the sent data is handled as a set of u16. In this case, Size must reflect the number of u16 available through pData.

Parameters:

hirda	Pointer to a IRDA_HandleTypeDef structure that contains the configuration information for the specified IRDA module.
pData	Pointer to data buffer (u8 or u16 data elements).
Size	Amount of data elements (u8 or u16) to be sent.

Return values:

HAL status

Definition at line 945 of file stm32f1xx_hal_irda.c.

References __IRDA_HandleTypeDef::ErrorCode, __IRDA_HandleTypeDef::gState, HAL_IRDA_ERROR_NONE, HAL_IRDA_STATE_BUSY_TX, HAL_IRDA_STATE_READY, __IRDA_HandleTypeDef::Instance, __IRDA_HandleTypeDef::pTxBuffPtr, __IRDA_HandleTypeDef::TxXferCount, and __IRDA_HandleTypeDef::TxXferSize.