STM32F103xB HAL User Manual: stm32f1xx_hal_tim

TIM HAL module driver. This file provides firmware functions to manage the following functionalities of the Timer Extended peripheral: + Time Hall Sensor Interface Initialization + Time Hall Sensor Interface Start + Time Complementary signal break and dead time configuration + Time Master and Slave synchronization configuration + Timer remapping capabilities configuration. More...

#include "stm32f1xx_hal.h"

Go to the source code of this file.

Functions
static void	TIM_DMADelayPulseNCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Delay Pulse complete callback (complementary channel).
static void	TIM_DMAErrorCCxN (DMA_HandleTypeDef *hdma)
	TIM DMA error callback (complementary channel)
static void	TIM_CCxNChannelCmd (TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState)
	Enables or disables the TIM Capture Compare Channel xN.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_Init (TIM_HandleTypeDef htim, TIM_HallSensor_InitTypeDef sConfig)
	Initializes the TIM Hall Sensor Interface and initialize the associated handle.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_DeInit (TIM_HandleTypeDef *htim)
	DeInitializes the TIM Hall Sensor interface.
__weak void	HAL_TIMEx_HallSensor_MspInit (TIM_HandleTypeDef *htim)
	Initializes the TIM Hall Sensor MSP.
__weak void	HAL_TIMEx_HallSensor_MspDeInit (TIM_HandleTypeDef *htim)
	DeInitializes TIM Hall Sensor MSP.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_Start (TIM_HandleTypeDef *htim)
	Starts the TIM Hall Sensor Interface.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_Stop (TIM_HandleTypeDef *htim)
	Stops the TIM Hall sensor Interface.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_Start_IT (TIM_HandleTypeDef *htim)
	Starts the TIM Hall Sensor Interface in interrupt mode.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_Stop_IT (TIM_HandleTypeDef *htim)
	Stops the TIM Hall Sensor Interface in interrupt mode.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_Start_DMA (TIM_HandleTypeDef htim, uint32_t pData, uint16_t Length)
	Starts the TIM Hall Sensor Interface in DMA mode.
HAL_StatusTypeDef	HAL_TIMEx_HallSensor_Stop_DMA (TIM_HandleTypeDef *htim)
	Stops the TIM Hall Sensor Interface in DMA mode.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Output Compare signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Output Compare signal generation in interrupt mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation in interrupt mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Start_DMA (TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
	Starts the TIM Output Compare signal generation in DMA mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation in DMA mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_PWMN_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the PWM signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_PWMN_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the PWM signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_PWMN_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the PWM signal generation in interrupt mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the PWM signal generation in interrupt mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_PWMN_Start_DMA (TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
	Starts the TIM PWM signal generation in DMA mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_PWMN_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM PWM signal generation in DMA mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Start (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Starts the TIM One Pulse signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Stop (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Stops the TIM One Pulse signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Start_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Starts the TIM One Pulse signal generation in interrupt mode on the complementary channel.
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Stops the TIM One Pulse signal generation in interrupt mode on the complementary channel.
HAL_StatusTypeDef	HAL_TIMEx_ConfigCommutEvent (TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
	Configure the TIM commutation event sequence.
HAL_StatusTypeDef	HAL_TIMEx_ConfigCommutEvent_IT (TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
	Configure the TIM commutation event sequence with interrupt.
HAL_StatusTypeDef	HAL_TIMEx_ConfigCommutEvent_DMA (TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
	Configure the TIM commutation event sequence with DMA.
HAL_StatusTypeDef	HAL_TIMEx_MasterConfigSynchronization (TIM_HandleTypeDef htim, TIM_MasterConfigTypeDef sMasterConfig)
	Configures the TIM in master mode.
HAL_StatusTypeDef	HAL_TIMEx_ConfigBreakDeadTime (TIM_HandleTypeDef htim, TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig)
	Configures the Break feature, dead time, Lock level, OSSI/OSSR State and the AOE(automatic output enable).
HAL_StatusTypeDef	HAL_TIMEx_RemapConfig (TIM_HandleTypeDef *htim, uint32_t Remap)
	Configures the TIMx Remapping input capabilities.
__weak void	HAL_TIMEx_CommutCallback (TIM_HandleTypeDef *htim)
	Hall commutation changed callback in non-blocking mode.
__weak void	HAL_TIMEx_CommutHalfCpltCallback (TIM_HandleTypeDef *htim)
	Hall commutation changed half complete callback in non-blocking mode.
__weak void	HAL_TIMEx_BreakCallback (TIM_HandleTypeDef *htim)
	Hall Break detection callback in non-blocking mode.
HAL_TIM_StateTypeDef	HAL_TIMEx_HallSensor_GetState (TIM_HandleTypeDef *htim)
	Return the TIM Hall Sensor interface handle state.
HAL_TIM_ChannelStateTypeDef	HAL_TIMEx_GetChannelNState (TIM_HandleTypeDef *htim, uint32_t ChannelN)
	Return actual state of the TIM complementary channel.
void	TIMEx_DMACommutationCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Commutation callback.
void	TIMEx_DMACommutationHalfCplt (DMA_HandleTypeDef *hdma)
	TIM DMA Commutation half complete callback.

Detailed Description

Author:

MCD Application Team

  ==============================================================================
                      ##### TIMER Extended features #####
  ==============================================================================
  [..]
    The Timer Extended features include:
    (#) Complementary outputs with programmable dead-time for :
        (++) Output Compare
        (++) PWM generation (Edge and Center-aligned Mode)
        (++) One-pulse mode output
    (#) Synchronization circuit to control the timer with external signals and to
        interconnect several timers together.
    (#) Break input to put the timer output signals in reset state or in a known state.
    (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
        positioning purposes

            ##### How to use this driver #####
  ==============================================================================
    [..]
     (#) Initialize the TIM low level resources by implementing the following functions
         depending on the selected feature:
           (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit()

     (#) Initialize the TIM low level resources :
        (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
        (##) TIM pins configuration
            (+++) Enable the clock for the TIM GPIOs using the following function:
              __HAL_RCC_GPIOx_CLK_ENABLE();
            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();

     (#) The external Clock can be configured, if needed (the default clock is the
         internal clock from the APBx), using the following function:
         HAL_TIM_ConfigClockSource, the clock configuration should be done before
         any start function.

     (#) Configure the TIM in the desired functioning mode using one of the
         initialization function of this driver:
          (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the
               Timer Hall Sensor Interface and the commutation event with the corresponding
               Interrupt and DMA request if needed (Note that One Timer is used to interface
               with the Hall sensor Interface and another Timer should be used to use
               the commutation event).

     (#) Activate the TIM peripheral using one of the start functions:
           (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(),
                HAL_TIMEx_OCN_Start_IT()
           (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(),
                HAL_TIMEx_PWMN_Start_IT()
           (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
           (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(),
                HAL_TIMEx_HallSensor_Start_IT().

Attention:

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Definition in file stm32f1xx_hal_tim_ex.c.

Functions

Detailed Description

© Copyright (c) 2016 STMicroelectronics. All rights reserved.