Extended Timer Complementary One Pulse functions

Timer Complementary One Pulse functions. More...

Functions
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Start (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Starts the TIM One Pulse signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Stop (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Stops the TIM One Pulse signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Start_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Starts the TIM One Pulse signal generation in interrupt mode on the complementary channel.
HAL_StatusTypeDef	HAL_TIMEx_OnePulseN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
	Stops the TIM One Pulse signal generation in interrupt mode on the complementary channel.

---

Detailed Description

Timer Complementary One Pulse functions.

  ==============================================================================
                ##### Timer Complementary One Pulse functions #####
  ==============================================================================
  [..]
    This section provides functions allowing to:
    (+) Start the Complementary One Pulse generation.
    (+) Stop the Complementary One Pulse.
    (+) Start the Complementary One Pulse and enable interrupts.
    (+) Stop the Complementary One Pulse and disable interrupts.

---

Function Documentation

HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start	(	TIM_HandleTypeDef *	htim,
		uint32_t	OutputChannel
	)

Starts the TIM One Pulse signal generation on the complementary output.

Note:

OutputChannel must match the pulse output channel chosen when calling HAL_TIM_OnePulse_ConfigChannel().

Parameters:

htim	TIM One Pulse handle
OutputChannel	pulse output channel to enable This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected

Return values:

HAL

status

Definition at line 1535 of file stm32f1xx_hal_tim_ex.c.

References __HAL_TIM_MOE_ENABLE, assert_param, HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCx_ENABLE, TIM_CCxChannelCmd(), TIM_CCxN_ENABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_GET, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_GET, and TIM_CHANNEL_STATE_SET.

HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT	(	TIM_HandleTypeDef *	htim,
		uint32_t	OutputChannel
	)

Starts the TIM One Pulse signal generation in interrupt mode on the complementary channel.

Note:

OutputChannel must match the pulse output channel chosen when calling HAL_TIM_OnePulse_ConfigChannel().

Parameters:

htim	TIM One Pulse handle
OutputChannel	pulse output channel to enable This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected

Return values:

HAL

status

Definition at line 1623 of file stm32f1xx_hal_tim_ex.c.

References __HAL_TIM_ENABLE_IT, __HAL_TIM_MOE_ENABLE, assert_param, HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCx_ENABLE, TIM_CCxChannelCmd(), TIM_CCxN_ENABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_GET, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_GET, TIM_CHANNEL_STATE_SET, TIM_IT_CC1, and TIM_IT_CC2.

HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop	(	TIM_HandleTypeDef *	htim,
		uint32_t	OutputChannel
	)

Stops the TIM One Pulse signal generation on the complementary output.

Note:

OutputChannel must match the pulse output channel chosen when calling HAL_TIM_OnePulse_ConfigChannel().

Parameters:

htim	TIM One Pulse handle
OutputChannel	pulse output channel to disable This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected

Return values:

HAL

status

Definition at line 1584 of file stm32f1xx_hal_tim_ex.c.

References __HAL_TIM_DISABLE, __HAL_TIM_MOE_DISABLE, assert_param, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCx_DISABLE, TIM_CCxChannelCmd(), TIM_CCxN_DISABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_SET, and TIM_CHANNEL_STATE_SET.

HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT	(	TIM_HandleTypeDef *	htim,
		uint32_t	OutputChannel
	)

Stops the TIM One Pulse signal generation in interrupt mode on the complementary channel.

Note:

OutputChannel must match the pulse output channel chosen when calling HAL_TIM_OnePulse_ConfigChannel().

Parameters:

htim	TIM One Pulse handle
OutputChannel	pulse output channel to disable This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected

Return values:

HAL

status

Definition at line 1678 of file stm32f1xx_hal_tim_ex.c.

References __HAL_TIM_DISABLE, __HAL_TIM_DISABLE_IT, __HAL_TIM_MOE_DISABLE, assert_param, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCx_DISABLE, TIM_CCxChannelCmd(), TIM_CCxN_DISABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_SET, TIM_IT_CC1, and TIM_IT_CC2.