Functions
__STATIC_INLINE void	LL_ADC_REG_StartConversionSWStart (ADC_TypeDef *ADCx)
	Start ADC group regular conversion.
__STATIC_INLINE void	LL_ADC_REG_StartConversionExtTrig (ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge)
	Start ADC group regular conversion from external trigger.
__STATIC_INLINE void	LL_ADC_REG_StopConversionExtTrig (ADC_TypeDef *ADCx)
	Stop ADC group regular conversion from external trigger.
__STATIC_INLINE uint32_t	LL_ADC_REG_ReadConversionData32 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for all ADC configurations: all ADC resolutions and all oversampling increased data width (for devices with feature oversampling).
__STATIC_INLINE uint16_t	LL_ADC_REG_ReadConversionData12 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 12 bits.
__STATIC_INLINE uint16_t	LL_ADC_REG_ReadConversionData10 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 10 bits.
__STATIC_INLINE uint8_t	LL_ADC_REG_ReadConversionData8 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 8 bits.
__STATIC_INLINE uint8_t	LL_ADC_REG_ReadConversionData6 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 6 bits.
__STATIC_INLINE uint32_t	LL_ADC_REG_ReadMultiConversionData32 (ADC_Common_TypeDef *ADCxy_COMMON, uint32_t ConversionData)
	Get ADC multimode conversion data of ADC master, ADC slave or raw data with ADC master and slave concatenated.

Function Documentation

__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10 ( ADC_TypeDef * ADCx )

Get ADC group regular conversion data, range fit for ADC resolution 10 bits.

Note:: For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:: DR RDATA LL_ADC_REG_ReadConversionData10

Parameters:

ADCx	ADC instance

Return values:

Value between Min_Data=0x000 and Max_Data=0x3FF

Definition at line 4002 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12 ( ADC_TypeDef * ADCx )

Get ADC group regular conversion data, range fit for ADC resolution 12 bits.

Note:: For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:: DR RDATA LL_ADC_REG_ReadConversionData12

Parameters:

ADCx	ADC instance

Return values:

Value between Min_Data=0x000 and Max_Data=0xFFF

Definition at line 3987 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32 ( ADC_TypeDef * ADCx )

Get ADC group regular conversion data, range fit for all ADC configurations: all ADC resolutions and all oversampling increased data width (for devices with feature oversampling).

Reference Manual to LL API cross reference:: DR RDATA LL_ADC_REG_ReadConversionData32

Parameters:

ADCx	ADC instance

Return values:

Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF

Definition at line 3972 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6 ( ADC_TypeDef * ADCx )

Get ADC group regular conversion data, range fit for ADC resolution 6 bits.

Note:: For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:: DR RDATA LL_ADC_REG_ReadConversionData6

Parameters:

ADCx	ADC instance

Return values:

Value between Min_Data=0x00 and Max_Data=0x3F

Definition at line 4032 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8 ( ADC_TypeDef * ADCx )

Get ADC group regular conversion data, range fit for ADC resolution 8 bits.

Note:: For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:: DR RDATA LL_ADC_REG_ReadConversionData8

Parameters:

ADCx	ADC instance

Return values:

Value between Min_Data=0x00 and Max_Data=0xFF

Definition at line 4017 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32	(	ADC_Common_TypeDef *	ADCxy_COMMON,
		uint32_t	ConversionData
	)

Get ADC multimode conversion data of ADC master, ADC slave or raw data with ADC master and slave concatenated.

Note:: If raw data with ADC master and slave concatenated is retrieved, a macro is available to get the conversion data of ADC master or ADC slave: see helper macro __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(). (however this macro is mainly intended for multimode transfer by DMA, because this function can do the same by getting multimode conversion data of ADC master or ADC slave separately).

Reference Manual to LL API cross reference:: CDR DATA1 LL_ADC_REG_ReadMultiConversionData32
CDR DATA2 LL_ADC_REG_ReadMultiConversionData32

Parameters:

ADCxy_COMMON	ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )
ConversionData	This parameter can be one of the following values: LL_ADC_MULTI_MASTER LL_ADC_MULTI_SLAVE LL_ADC_MULTI_MASTER_SLAVE

Return values:

Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF

Definition at line 4059 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE void LL_ADC_REG_StartConversionExtTrig	(	ADC_TypeDef *	ADCx,
		uint32_t	ExternalTriggerEdge
	)

Start ADC group regular conversion from external trigger.

Note:: ADC conversion will start at next trigger event (on the selected trigger edge) following the ADC start conversion command.; On this STM32 series, this function is relevant for ADC conversion start from external trigger. If internal trigger (SW start) is needed, perform ADC conversion start using function LL_ADC_REG_StartConversionSWStart().

Reference Manual to LL API cross reference:: CR2 EXTEN LL_ADC_REG_StartConversionExtTrig

Parameters:

ExternalTriggerEdge	This parameter can be one of the following values: LL_ADC_REG_TRIG_EXT_RISING LL_ADC_REG_TRIG_EXT_FALLING LL_ADC_REG_TRIG_EXT_RISINGFALLING
ADCx	ADC instance

Return values:

None

Definition at line 3940 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE void LL_ADC_REG_StartConversionSWStart ( ADC_TypeDef * ADCx )

Start ADC group regular conversion.

Note:

On this STM32 series, this function is relevant only for internal trigger (SW start), not for external trigger:

If ADC trigger has been set to software start, ADC conversion starts immediately.
If ADC trigger has been set to external trigger, ADC conversion start must be performed using function LL_ADC_REG_StartConversionExtTrig(). (if external trigger edge would have been set during ADC other settings, ADC conversion would start at trigger event as soon as ADC is enabled).

Reference Manual to LL API cross reference:: CR2 SWSTART LL_ADC_REG_StartConversionSWStart

Parameters:

ADCx	ADC instance

Return values:

None

Definition at line 3919 of file stm32f4xx_ll_adc.h.

__STATIC_INLINE void LL_ADC_REG_StopConversionExtTrig ( ADC_TypeDef * ADCx )

Stop ADC group regular conversion from external trigger.

Note:: No more ADC conversion will start at next trigger event following the ADC stop conversion command. If a conversion is on-going, it will be completed.; On this STM32 series, there is no specific command to stop a conversion on-going or to stop ADC converting in continuous mode. These actions can be performed using function LL_ADC_Disable().

Reference Manual to LL API cross reference:: CR2 EXTEN LL_ADC_REG_StopConversionExtTrig

Parameters:

ADCx	ADC instance

Return values:

None

Definition at line 3958 of file stm32f4xx_ll_adc.h.

Functions

Function Documentation