Programming operation functions

Programming operation functions. More...

Functions
HAL_StatusTypeDef	HAL_FLASH_Program (uint32_t TypeProgram, uint32_t Address, uint64_t Data)
	Program byte, halfword, word or double word at a specified address.
HAL_StatusTypeDef	HAL_FLASH_Program_IT (uint32_t TypeProgram, uint32_t Address, uint64_t Data)
	Program byte, halfword, word or double word at a specified address with interrupt enabled.
void	HAL_FLASH_IRQHandler (void)
	This function handles FLASH interrupt request.
__weak void	HAL_FLASH_EndOfOperationCallback (uint32_t ReturnValue)
	FLASH end of operation interrupt callback.
__weak void	HAL_FLASH_OperationErrorCallback (uint32_t ReturnValue)
	FLASH operation error interrupt callback.

---

Detailed Description

Programming operation functions.

 ===============================================================================
                  ##### Programming operation functions #####
 ===============================================================================  
    [..]
    This subsection provides a set of functions allowing to manage the FLASH 
    program operations.

---

Function Documentation

void HAL_FLASH_EndOfOperationCallback

(

uint32_t

ReturnValue

)

FLASH end of operation interrupt callback.

Parameters:

ReturnValue

The value saved in this parameter depends on the ongoing procedure Mass Erase: Bank number which has been requested to erase Sectors Erase: Sector which has been erased (if 0xFFFFFFFFU, it means that all the selected sectors have been erased) Program: Address which was selected for data program

Return values:

None

Definition at line 384 of file stm32f4xx_hal_flash.c.

Referenced by HAL_FLASH_IRQHandler().

void HAL_FLASH_IRQHandler

(

void

)

This function handles FLASH interrupt request.

Return values:

None

Definition at line 261 of file stm32f4xx_hal_flash.c.

References __HAL_FLASH_CLEAR_FLAG, __HAL_FLASH_DISABLE_IT, __HAL_FLASH_GET_FLAG, FLASH_ProcessTypeDef::Address, FLASH_ProcessTypeDef::Bank, FLASH_Erase_Sector(), FLASH_FLAG_EOP, FLASH_FLAG_OPERR, FLASH_FLAG_PGAERR, FLASH_FLAG_PGPERR, FLASH_FLAG_PGSERR, FLASH_FLAG_RDERR, FLASH_FLAG_WRPERR, FLASH_FlushCaches(), FLASH_IT_EOP, FLASH_IT_ERR, FLASH_MER_BIT, FLASH_PROC_MASSERASE, FLASH_PROC_NONE, FLASH_PROC_SECTERASE, FLASH_SetErrorCode(), HAL_FLASH_EndOfOperationCallback(), HAL_FLASH_OperationErrorCallback(), FLASH_ProcessTypeDef::NbSectorsToErase, FLASH_ProcessTypeDef::ProcedureOnGoing, FLASH_ProcessTypeDef::Sector, and FLASH_ProcessTypeDef::VoltageForErase.

void HAL_FLASH_OperationErrorCallback

(

uint32_t

ReturnValue

)

FLASH operation error interrupt callback.

Parameters:

ReturnValue

The value saved in this parameter depends on the ongoing procedure Mass Erase: Bank number which has been requested to erase Sectors Erase: Sector number which returned an error Program: Address which was selected for data program

Return values:

None

Definition at line 401 of file stm32f4xx_hal_flash.c.

Referenced by HAL_FLASH_IRQHandler().

HAL_StatusTypeDef HAL_FLASH_Program	(	uint32_t	TypeProgram,
		uint32_t	Address,
		uint64_t	Data
	)

Program byte, halfword, word or double word at a specified address.

Parameters:

TypeProgram	Indicate the way to program at a specified address. This parameter can be a value of FLASH Type Program
Address	specifies the address to be programmed.
Data	specifies the data to be programmed

Return values:

HAL_StatusTypeDef

HAL Status

Definition at line 156 of file stm32f4xx_hal_flash.c.

References assert_param, FLASH_Program_Byte(), FLASH_Program_DoubleWord(), FLASH_Program_HalfWord(), FLASH_Program_Word(), FLASH_TIMEOUT_VALUE, FLASH_TYPEPROGRAM_BYTE, FLASH_TYPEPROGRAM_HALFWORD, FLASH_TYPEPROGRAM_WORD, FLASH_WaitForLastOperation(), and IS_FLASH_TYPEPROGRAM.

HAL_StatusTypeDef HAL_FLASH_Program_IT	(	uint32_t	TypeProgram,
		uint32_t	Address,
		uint64_t	Data
	)

Program byte, halfword, word or double word at a specified address with interrupt enabled.

Parameters:

TypeProgram	Indicate the way to program at a specified address. This parameter can be a value of FLASH Type Program
Address	specifies the address to be programmed.
Data	specifies the data to be programmed

Return values:

HAL

Status

Definition at line 214 of file stm32f4xx_hal_flash.c.

References __HAL_FLASH_ENABLE_IT, FLASH_ProcessTypeDef::Address, assert_param, FLASH_IT_EOP, FLASH_IT_ERR, FLASH_PROC_PROGRAM, FLASH_Program_Byte(), FLASH_Program_DoubleWord(), FLASH_Program_HalfWord(), FLASH_Program_Word(), FLASH_TYPEPROGRAM_BYTE, FLASH_TYPEPROGRAM_HALFWORD, FLASH_TYPEPROGRAM_WORD, IS_FLASH_TYPEPROGRAM, and FLASH_ProcessTypeDef::ProcedureOnGoing.