Data transfer functions. More...

Functions
HAL_StatusTypeDef	HAL_SD_ReadBlocks (SD_HandleTypeDef hsd, uint8_t pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
	Reads block(s) from a specified address in a card.
HAL_StatusTypeDef	HAL_SD_WriteBlocks (SD_HandleTypeDef hsd, uint8_t pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
	Allows to write block(s) to a specified address in a card.
HAL_StatusTypeDef	HAL_SD_ReadBlocks_IT (SD_HandleTypeDef hsd, uint8_t pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
	Reads block(s) from a specified address in a card.
HAL_StatusTypeDef	HAL_SD_WriteBlocks_IT (SD_HandleTypeDef hsd, uint8_t pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
	Writes block(s) to a specified address in a card.
HAL_StatusTypeDef	HAL_SD_ReadBlocks_DMA (SD_HandleTypeDef hsd, uint8_t pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
	Reads block(s) from a specified address in a card.
HAL_StatusTypeDef	HAL_SD_WriteBlocks_DMA (SD_HandleTypeDef hsd, uint8_t pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
	Writes block(s) to a specified address in a card.
HAL_StatusTypeDef	HAL_SD_Erase (SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd)
	Erases the specified memory area of the given SD card.
void	HAL_SD_IRQHandler (SD_HandleTypeDef *hsd)
	This function handles SD card interrupt request.
HAL_SD_StateTypeDef	HAL_SD_GetState (SD_HandleTypeDef *hsd)
	return the SD state
uint32_t	HAL_SD_GetError (SD_HandleTypeDef *hsd)
	Return the SD error code.
__weak void	HAL_SD_TxCpltCallback (SD_HandleTypeDef *hsd)
	Tx Transfer completed callbacks.
__weak void	HAL_SD_RxCpltCallback (SD_HandleTypeDef *hsd)
	Rx Transfer completed callbacks.
__weak void	HAL_SD_ErrorCallback (SD_HandleTypeDef *hsd)
	SD error callbacks.
__weak void	HAL_SD_AbortCallback (SD_HandleTypeDef *hsd)
	SD Abort callbacks.
HAL_StatusTypeDef	HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, pSD_CallbackTypeDef pCallback)
	Register a User SD Callback To be used instead of the weak (surcharged) predefined callback.
HAL_StatusTypeDef	HAL_SD_UnRegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID)
	Unregister a User SD Callback SD Callback is redirected to the weak (surcharged) predefined callback.

Detailed Description

Data transfer functions.

  ==============================================================================
                        ##### IO operation functions #####
  ==============================================================================
  [..]
    This subsection provides a set of functions allowing to manage the data
    transfer from/to SD card.

Function Documentation

__weak void HAL_SD_AbortCallback ( SD_HandleTypeDef * hsd )

SD Abort callbacks.

Parameters:

hsd,: Pointer SD handle

Return values:

None

Definition at line 1791 of file stm32f4xx_hal_sd.c.

Referenced by HAL_SD_Abort_IT(), HAL_SD_Init(), HAL_SD_IRQHandler(), HAL_SD_UnRegisterCallback(), SD_DMARxAbort(), and SD_DMATxAbort().

HAL_StatusTypeDef HAL_SD_Erase	(	SD_HandleTypeDef *	hsd,
		uint32_t	BlockStartAdd,
		uint32_t	BlockEndAdd
	)

Erases the specified memory area of the given SD card.

Note:: This API should be followed by a check on the card state through HAL_SD_GetCardState().

Parameters:

hsd,:	Pointer to SD handle
BlockStartAdd,:	Start Block address
BlockEndAdd,:	End Block address

Return values:

HAL status

Definition at line 1407 of file stm32f4xx_hal_sd.c.

__weak void HAL_SD_ErrorCallback ( SD_HandleTypeDef * hsd )

SD error callbacks.

Parameters:

hsd,: Pointer SD handle

Return values:

None

Definition at line 1776 of file stm32f4xx_hal_sd.c.

Referenced by HAL_SD_Init(), HAL_SD_IRQHandler(), HAL_SD_UnRegisterCallback(), SD_DMAError(), SD_DMAReceiveCplt(), SD_DMARxAbort(), and SD_DMATxAbort().

uint32_t HAL_SD_GetError ( SD_HandleTypeDef * hsd )

Return the SD error code.

Parameters:

hsd	: Pointer to a SD_HandleTypeDef structure that contains the configuration information.

Return values:

SD	Error Code

Definition at line 1736 of file stm32f4xx_hal_sd.c.

HAL_SD_StateTypeDef HAL_SD_GetState ( SD_HandleTypeDef * hsd )

return the SD state

Parameters:

hsd,: Pointer to sd handle

Return values:

HAL state

Definition at line 1725 of file stm32f4xx_hal_sd.c.

void HAL_SD_IRQHandler ( SD_HandleTypeDef * hsd )

This function handles SD card interrupt request.

Parameters:

hsd,: Pointer to SD handle

Return values:

None

Definition at line 1509 of file stm32f4xx_hal_sd.c.

References HAL_DMA_Abort_IT(), HAL_SD_AbortCallback(), HAL_SD_ErrorCallback(), HAL_SD_RxCpltCallback(), HAL_SD_TxCpltCallback(), SD_DMARxAbort(), SD_DMATxAbort(), SD_Read_IT(), and SD_Write_IT().

HAL_StatusTypeDef HAL_SD_ReadBlocks	(	SD_HandleTypeDef *	hsd,
		uint8_t *	pData,
		uint32_t	BlockAdd,
		uint32_t	NumberOfBlocks,
		uint32_t	Timeout
	)

Reads block(s) from a specified address in a card.

The Data transfer is managed by polling mode.

Note:: This API should be followed by a check on the card state through HAL_SD_GetCardState().

Parameters:

hsd,:	Pointer to SD handle
pData,:	pointer to the buffer that will contain the received data
BlockAdd,:	Block Address from where data is to be read
NumberOfBlocks,:	Number of SD blocks to read
Timeout,:	Specify timeout value

Return values:

HAL status

Definition at line 567 of file stm32f4xx_hal_sd.c.

References HAL_GetTick().

HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA	(	SD_HandleTypeDef *	hsd,
		uint8_t *	pData,
		uint32_t	BlockAdd,
		uint32_t	NumberOfBlocks
	)

Reads block(s) from a specified address in a card.

The Data transfer is managed by DMA mode.

Note:: This API should be followed by a check on the card state through HAL_SD_GetCardState().; You could also check the DMA transfer process through the SD Rx interrupt event.

Parameters:

hsd,:	Pointer SD handle
pData,:	Pointer to the buffer that will contain the received data
BlockAdd,:	Block Address from where data is to be read
NumberOfBlocks,:	Number of blocks to read.

Return values:

HAL status

Definition at line 1163 of file stm32f4xx_hal_sd.c.

References DMA_PERIPH_TO_MEMORY, HAL_DMA_Start_IT(), SD_DMAError(), and SD_DMAReceiveCplt().

HAL_StatusTypeDef HAL_SD_ReadBlocks_IT	(	SD_HandleTypeDef *	hsd,
		uint8_t *	pData,
		uint32_t	BlockAdd,
		uint32_t	NumberOfBlocks
	)

Reads block(s) from a specified address in a card.

The Data transfer is managed in interrupt mode.

Note:: This API should be followed by a check on the card state through HAL_SD_GetCardState().; You could also check the IT transfer process through the SD Rx interrupt event.

Parameters:

hsd,:	Pointer to SD handle
pData,:	Pointer to the buffer that will contain the received data
BlockAdd,:	Block Address from where data is to be read
NumberOfBlocks,:	Number of blocks to read.

Return values:

HAL status

Definition at line 970 of file stm32f4xx_hal_sd.c.

HAL_StatusTypeDef HAL_SD_RegisterCallback	(	SD_HandleTypeDef *	hsd,
		HAL_SD_CallbackIDTypeDef	CallbackID,
		pSD_CallbackTypeDef	pCallback
	)

Register a User SD Callback To be used instead of the weak (surcharged) predefined callback.

Parameters:

hsd	: SD handle
CallbackID	: ID of the callback to be registered This parameter can be one of the following values: HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID HAL_SD_ERROR_CB_ID SD Error Callback ID HAL_SD_ABORT_CB_ID SD Abort Callback ID HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID
pCallback	: pointer to the Callback function

Return values:

status

Definition at line 1817 of file stm32f4xx_hal_sd.c.

__weak void HAL_SD_RxCpltCallback ( SD_HandleTypeDef * hsd )

Rx Transfer completed callbacks.

Parameters:

hsd,: Pointer SD handle

Return values:

None

Definition at line 1761 of file stm32f4xx_hal_sd.c.

Referenced by HAL_SD_Init(), HAL_SD_IRQHandler(), HAL_SD_UnRegisterCallback(), and SD_DMAReceiveCplt().

__weak void HAL_SD_TxCpltCallback ( SD_HandleTypeDef * hsd )

Tx Transfer completed callbacks.

Parameters:

hsd,: Pointer to SD handle

Return values:

None

Definition at line 1746 of file stm32f4xx_hal_sd.c.

Referenced by HAL_SD_Init(), HAL_SD_IRQHandler(), and HAL_SD_UnRegisterCallback().

HAL_StatusTypeDef HAL_SD_UnRegisterCallback	(	SD_HandleTypeDef *	hsd,
		HAL_SD_CallbackIDTypeDef	CallbackID
	)

Unregister a User SD Callback SD Callback is redirected to the weak (surcharged) predefined callback.

Parameters:

hsd	: SD handle
CallbackID	: ID of the callback to be unregistered This parameter can be one of the following values: HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID HAL_SD_ERROR_CB_ID SD Error Callback ID HAL_SD_ABORT_CB_ID SD Abort Callback ID HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID

Return values:

status

Definition at line 1906 of file stm32f4xx_hal_sd.c.

References HAL_SD_AbortCallback(), HAL_SD_ErrorCallback(), HAL_SD_MspDeInit(), HAL_SD_MspInit(), HAL_SD_RxCpltCallback(), and HAL_SD_TxCpltCallback().

HAL_StatusTypeDef HAL_SD_WriteBlocks	(	SD_HandleTypeDef *	hsd,
		uint8_t *	pData,
		uint32_t	BlockAdd,
		uint32_t	NumberOfBlocks,
		uint32_t	Timeout
	)

Allows to write block(s) to a specified address in a card.

The Data transfer is managed by polling mode.

Note:: This API should be followed by a check on the card state through HAL_SD_GetCardState().

Parameters:

hsd,:	Pointer to SD handle
pData,:	pointer to the buffer that will contain the data to transmit
BlockAdd,:	Block Address where data will be written
NumberOfBlocks,:	Number of SD blocks to write
Timeout,:	Specify timeout value

Return values:

HAL status

Definition at line 782 of file stm32f4xx_hal_sd.c.

References HAL_GetTick().

HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA	(	SD_HandleTypeDef *	hsd,
		uint8_t *	pData,
		uint32_t	BlockAdd,
		uint32_t	NumberOfBlocks
	)

Writes block(s) to a specified address in a card.

The Data transfer is managed by DMA mode.

Note:: This API should be followed by a check on the card state through HAL_SD_GetCardState().; You could also check the DMA transfer process through the SD Tx interrupt event.

Parameters:

hsd,:	Pointer to SD handle
pData,:	Pointer to the buffer that will contain the data to transmit
BlockAdd,:	Block Address where data will be written
NumberOfBlocks,:	Number of blocks to write

Return values:

HAL status

Definition at line 1284 of file stm32f4xx_hal_sd.c.

References DMA_MEMORY_TO_PERIPH, HAL_DMA_Start_IT(), SD_DMAError(), and SD_DMATransmitCplt().

HAL_StatusTypeDef HAL_SD_WriteBlocks_IT	(	SD_HandleTypeDef *	hsd,
		uint8_t *	pData,
		uint32_t	BlockAdd,
		uint32_t	NumberOfBlocks
	)

Writes block(s) to a specified address in a card.

The Data transfer is managed in interrupt mode.

Note:: This API should be followed by a check on the card state through HAL_SD_GetCardState().; You could also check the IT transfer process through the SD Tx interrupt event.

Parameters:

hsd,:	Pointer to SD handle
pData,:	Pointer to the buffer that will contain the data to transmit
BlockAdd,:	Block Address where data will be written
NumberOfBlocks,:	Number of blocks to write

Return values:

HAL status

Definition at line 1066 of file stm32f4xx_hal_sd.c.

Functions

Detailed Description

Function Documentation