Operation on ADC hierarchical scope: group regular

Functions
__STATIC_INLINE void	LL_ADC_REG_StartConversion (ADC_TypeDef *ADCx)
	Start ADC group regular conversion.
__STATIC_INLINE void	LL_ADC_REG_StopConversion (ADC_TypeDef *ADCx)
	Stop ADC group regular conversion.
__STATIC_INLINE uint32_t	LL_ADC_REG_IsConversionOngoing (ADC_TypeDef *ADCx)
	Get ADC group regular conversion state.
__STATIC_INLINE uint32_t	LL_ADC_REG_IsStopConversionOngoing (ADC_TypeDef *ADCx)
	Get ADC group regular command of conversion stop state.
__STATIC_INLINE uint32_t	LL_ADC_REG_ReadConversionData32 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for all ADC configurations: all ADC resolutions and all oversampling increased data width (for devices with feature oversampling).
__STATIC_INLINE uint16_t	LL_ADC_REG_ReadConversionData16 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 16 bits.
__STATIC_INLINE uint16_t	LL_ADC_REG_ReadConversionData14 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 14 bits.
__STATIC_INLINE uint16_t	LL_ADC_REG_ReadConversionData12 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 12 bits.
__STATIC_INLINE uint16_t	LL_ADC_REG_ReadConversionData10 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 10 bits.
__STATIC_INLINE uint8_t	LL_ADC_REG_ReadConversionData8 (ADC_TypeDef *ADCx)
	Get ADC group regular conversion data, range fit for ADC resolution 8 bits.
__STATIC_INLINE uint32_t	LL_ADC_REG_ReadMultiConversionData32 (ADC_Common_TypeDef *ADCxy_COMMON, uint32_t ConversionData)
	Get ADC multimode conversion data of ADC master, ADC slave or raw data with ADC master and slave concatenated.

---

Function Documentation

__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing

(

ADC_TypeDef *

ADCx

)

Get ADC group regular conversion state.

Reference Manual to LL API cross reference:

CR ADSTART LL_ADC_REG_IsConversionOngoing

Parameters:

ADCx	ADC instance

Return values:

0,:	no conversion is on going on ADC group regular.

Definition at line 6948 of file stm32h7xx_ll_adc.h.

Referenced by ADC_ConversionStop(), HAL_ADC_AnalogWDGConfig(), HAL_ADC_ConfigChannel(), HAL_ADC_Init(), HAL_ADC_IRQHandler(), HAL_ADC_Start(), HAL_ADC_Start_DMA(), HAL_ADC_Start_IT(), HAL_ADCEx_Calibration_SetValue(), HAL_ADCEx_DisableInjectedQueue(), HAL_ADCEx_EnableInjectedQueue(), HAL_ADCEx_InjectedConfigChannel(), HAL_ADCEx_InjectedStop(), HAL_ADCEx_InjectedStop_IT(), HAL_ADCEx_LinearCalibration_GetValue(), HAL_ADCEx_LinearCalibration_SetValue(), HAL_ADCEx_MultiModeConfigChannel(), HAL_ADCEx_MultiModeStart_DMA(), HAL_ADCEx_MultiModeStop_DMA(), HAL_ADCEx_RegularMultiModeStop_DMA(), and LL_ADC_DeInit().

__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing

(

ADC_TypeDef *

ADCx

)

Get ADC group regular command of conversion stop state.

Reference Manual to LL API cross reference:

CR ADSTP LL_ADC_REG_IsStopConversionOngoing

Parameters:

ADCx	ADC instance

Return values:

0,:	no command of conversion stop is on going on ADC group regular.

Definition at line 6959 of file stm32h7xx_ll_adc.h.

Referenced by LL_ADC_DeInit().

__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10

(

ADC_TypeDef *

ADCx

)

Get ADC group regular conversion data, range fit for ADC resolution 10 bits.

Note:

For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:

DR RDATA LL_ADC_REG_ReadConversionData10

Parameters:

ADCx	ADC instance

Return values:

Value

between Min_Data=0x000 and Max_Data=0x3FF

Definition at line 7033 of file stm32h7xx_ll_adc.h.

__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12

(

ADC_TypeDef *

ADCx

)

Get ADC group regular conversion data, range fit for ADC resolution 12 bits.

Note:

For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:

DR RDATA LL_ADC_REG_ReadConversionData12

Parameters:

ADCx	ADC instance

Return values:

Value

between Min_Data=0x000 and Max_Data=0xFFF

Definition at line 7018 of file stm32h7xx_ll_adc.h.

__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData14

(

ADC_TypeDef *

ADCx

)

Get ADC group regular conversion data, range fit for ADC resolution 14 bits.

Note:

For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:

DR RDATA LL_ADC_REG_ReadConversionData14

Parameters:

ADCx	ADC instance

Return values:

Value

between Min_Data=0x00 and Max_Data=0x3FF

Definition at line 7003 of file stm32h7xx_ll_adc.h.

__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData16

(

ADC_TypeDef *

ADCx

)

Get ADC group regular conversion data, range fit for ADC resolution 16 bits.

Note:

For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:

DR RDATA LL_ADC_REG_ReadConversionData16

Parameters:

ADCx	ADC instance

Return values:

Value

between Min_Data=0x00 and Max_Data=0xFFFF

Definition at line 6988 of file stm32h7xx_ll_adc.h.

__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32

(

ADC_TypeDef *

ADCx

)

Get ADC group regular conversion data, range fit for all ADC configurations: all ADC resolutions and all oversampling increased data width (for devices with feature oversampling).

Reference Manual to LL API cross reference:

DR RDATA LL_ADC_REG_ReadConversionData32

Parameters:

ADCx	ADC instance

Return values:

Value

between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF

Definition at line 6973 of file stm32h7xx_ll_adc.h.

__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8

(

ADC_TypeDef *

ADCx

)

Get ADC group regular conversion data, range fit for ADC resolution 8 bits.

Note:

For devices with feature oversampling: Oversampling can increase data width, function for extended range may be needed: LL_ADC_REG_ReadConversionData32.

Reference Manual to LL API cross reference:

DR RDATA LL_ADC_REG_ReadConversionData8

Parameters:

ADCx	ADC instance

Return values:

Value

between Min_Data=0x00 and Max_Data=0xFF

Definition at line 7048 of file stm32h7xx_ll_adc.h.

__STATIC_INLINE uint32_t LL_ADC_REG_ReadMultiConversionData32	(	ADC_Common_TypeDef *	ADCxy_COMMON,
		uint32_t	ConversionData
	)

Get ADC multimode conversion data of ADC master, ADC slave or raw data with ADC master and slave concatenated.

Note:

If raw data with ADC master and slave concatenated is retrieved, a macro is available to get the conversion data of ADC master or ADC slave: see helper macro __LL_ADC_MULTI_CONV_DATA_MASTER_SLAVE(). (however this macro is mainly intended for multimode transfer by DMA, because this function can do the same by getting multimode conversion data of ADC master or ADC slave separately).

Reference Manual to LL API cross reference:

CDR RDATA_MST LL_ADC_REG_ReadMultiConversionData32
CDR RDATA_SLV LL_ADC_REG_ReadMultiConversionData32

Parameters:

ADCxy_COMMON	ADC common instance (can be set directly from CMSIS definition or by using helper macro __LL_ADC_COMMON_INSTANCE() )
ConversionData	This parameter can be one of the following values: LL_ADC_MULTI_MASTER LL_ADC_MULTI_SLAVE LL_ADC_MULTI_MASTER_SLAVE

Return values:

Value

between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF

Definition at line 7073 of file stm32h7xx_ll_adc.h.

__STATIC_INLINE void LL_ADC_REG_StartConversion

(

ADC_TypeDef *

ADCx

)

Start ADC group regular conversion.

Note:

On this STM32 series, this function is relevant for both internal trigger (SW start) and external trigger:

• If ADC trigger has been set to software start, ADC conversion starts immediately.
• If ADC trigger has been set to external trigger, ADC conversion will start at next trigger event (on the selected trigger edge) following the ADC start conversion command.

On this STM32 series, setting of this feature is conditioned to ADC state: ADC must be enabled without conversion on going on group regular, without conversion stop command on going on group regular, without ADC disable command on going.

Reference Manual to LL API cross reference:

CR ADSTART LL_ADC_REG_StartConversion

Parameters:

ADCx	ADC instance

Return values:

None

Definition at line 6912 of file stm32h7xx_ll_adc.h.

References ADC_CR_BITS_PROPERTY_RS.

Referenced by HAL_ADC_Start(), HAL_ADC_Start_DMA(), HAL_ADC_Start_IT(), HAL_ADCEx_LinearCalibration_GetValue(), HAL_ADCEx_LinearCalibration_SetValue(), and HAL_ADCEx_MultiModeStart_DMA().

__STATIC_INLINE void LL_ADC_REG_StopConversion

(

ADC_TypeDef *

ADCx

)

Stop ADC group regular conversion.

Note:

On this STM32 series, setting of this feature is conditioned to ADC state: ADC must be enabled with conversion on going on group regular, without ADC disable command on going.

Reference Manual to LL API cross reference:

CR ADSTP LL_ADC_REG_StopConversion

Parameters:

ADCx	ADC instance

Return values:

None

Definition at line 6932 of file stm32h7xx_ll_adc.h.

References ADC_CR_BITS_PROPERTY_RS.

Referenced by ADC_ConversionStop(), HAL_ADCEx_LinearCalibration_GetValue(), HAL_ADCEx_LinearCalibration_SetValue(), and LL_ADC_DeInit().