|
STM32H735xx HAL User Manual
|
Defines | |
| #define | LL_TIM_TRGO2_RESET 0x00000000U |
| #define | LL_TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 |
| #define | LL_TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 |
| #define | LL_TIM_TRGO2_CC1F (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
| #define | LL_TIM_TRGO2_OC1 TIM_CR2_MMS2_2 |
| #define | LL_TIM_TRGO2_OC2 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) |
| #define | LL_TIM_TRGO2_OC3 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) |
| #define | LL_TIM_TRGO2_OC4 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
| #define | LL_TIM_TRGO2_OC5 TIM_CR2_MMS2_3 |
| #define | LL_TIM_TRGO2_OC6 (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) |
| #define | LL_TIM_TRGO2_OC4_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) |
| #define | LL_TIM_TRGO2_OC6_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
| #define | LL_TIM_TRGO2_OC4_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) |
| #define | LL_TIM_TRGO2_OC4_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) |
| #define | LL_TIM_TRGO2_OC5_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) |
| #define | LL_TIM_TRGO2_OC5_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
| #define LL_TIM_TRGO2_CC1F (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
CC1 capture or a compare match is used as trigger output 2
Definition at line 885 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 |
Counter Enable signal (CNT_EN) is used as trigger output 2
Definition at line 883 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC1 TIM_CR2_MMS2_2 |
OC1REF signal is used as trigger output 2
Definition at line 886 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC2 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) |
OC2REF signal is used as trigger output 2
Definition at line 887 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC3 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) |
OC3REF signal is used as trigger output 2
Definition at line 888 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC4 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
OC4REF signal is used as trigger output 2
Definition at line 889 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC4_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) |
OC4REF rising or OC6REF falling edges are used as trigger output 2
Definition at line 895 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC4_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) |
OC4REF or OC6REF rising edges are used as trigger output 2
Definition at line 894 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC4_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) |
OC4REF rising or falling edges are used as trigger output 2
Definition at line 892 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC5 TIM_CR2_MMS2_3 |
OC5REF signal is used as trigger output 2
Definition at line 890 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC5_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
OC5REF rising or OC6REF falling edges are used as trigger output 2
Definition at line 897 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC5_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) |
OC5REF or OC6REF rising edges are used as trigger output 2
Definition at line 896 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC6 (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) |
OC6REF signal is used as trigger output 2
Definition at line 891 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_OC6_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) |
OC6REF rising or falling edges are used as trigger output 2
Definition at line 893 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_RESET 0x00000000U |
UG bit from the TIMx_EGR register is used as trigger output 2
Definition at line 882 of file stm32h7xx_ll_tim.h.
| #define LL_TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 |
Update event is used as trigger output 2
Definition at line 884 of file stm32h7xx_ll_tim.h.
1.7.6.1