USART_InitTypeDef Struct Reference

USART Init Structure definition. More...

#include <stm32h7xx_hal_usart.h>

Data Fields
uint32_t	BaudRate
uint32_t	WordLength
uint32_t	StopBits
uint32_t	Parity
uint32_t	Mode
uint32_t	CLKPolarity
uint32_t	CLKPhase
uint32_t	CLKLastBit
uint32_t	ClockPrescaler

---

Detailed Description

USART Init Structure definition.

Definition at line 46 of file stm32h7xx_hal_usart.h.

---

Field Documentation

uint32_t USART_InitTypeDef::BaudRate

This member configures the Usart communication baud rate. The baud rate is computed using the following formula: Baud Rate Register[15:4] = ((2 * fclk_pres) / ((huart->Init.BaudRate)))[15:4] Baud Rate Register[3] = 0 Baud Rate Register[2:0] = (((2 * fclk_pres) / ((huart->Init.BaudRate)))[3:0]) >> 1 where fclk_pres is the USART input clock frequency (fclk) divided by a prescaler.

Note:

Oversampling by 8 is systematically applied to achieve high baud rates.

Definition at line 48 of file stm32h7xx_hal_usart.h.

Referenced by USART_SetConfig().

uint32_t USART_InitTypeDef::CLKLastBit

Specifies whether the clock pulse corresponding to the last transmitted data bit (MSB) has to be output on the SCLK pin in synchronous mode. This parameter can be a value of USART Last Bit.

Definition at line 82 of file stm32h7xx_hal_usart.h.

Referenced by USART_SetConfig().

uint32_t USART_InitTypeDef::CLKPhase

Specifies the clock transition on which the bit capture is made. This parameter can be a value of USART Clock Phase.

Definition at line 79 of file stm32h7xx_hal_usart.h.

Referenced by USART_SetConfig().

uint32_t USART_InitTypeDef::CLKPolarity

Specifies the steady state of the serial clock. This parameter can be a value of USART Clock Polarity.

Definition at line 76 of file stm32h7xx_hal_usart.h.

Referenced by USART_SetConfig().

uint32_t USART_InitTypeDef::ClockPrescaler

Specifies the prescaler value used to divide the USART clock source. This parameter can be a value of USART Clock Prescaler.

Definition at line 86 of file stm32h7xx_hal_usart.h.

Referenced by USART_SetConfig().

uint32_t USART_InitTypeDef::Mode

Specifies whether the Receive or Transmit mode is enabled or disabled. This parameter can be a value of USART Mode.

Definition at line 73 of file stm32h7xx_hal_usart.h.

Referenced by USART_SetConfig().

uint32_t USART_InitTypeDef::Parity

Specifies the parity mode. This parameter can be a value of USART Parity

Note:

When parity is enabled, the computed parity is inserted at the MSB position of the transmitted data (9th bit when the word length is set to 9 data bits; 8th bit when the word length is set to 8 data bits).

Definition at line 66 of file stm32h7xx_hal_usart.h.

Referenced by HAL_USART_DMAResume(), HAL_USART_Receive(), HAL_USART_Receive_DMA(), HAL_USART_Receive_IT(), HAL_USART_Transmit(), HAL_USART_Transmit_IT(), HAL_USART_TransmitReceive(), HAL_USART_TransmitReceive_DMA(), HAL_USART_TransmitReceive_IT(), and USART_SetConfig().

uint32_t USART_InitTypeDef::StopBits

Specifies the number of stop bits transmitted. This parameter can be a value of USART Number of Stop Bits.

Definition at line 63 of file stm32h7xx_hal_usart.h.

Referenced by USART_SetConfig().

uint32_t USART_InitTypeDef::WordLength

Specifies the number of data bits transmitted or received in a frame. This parameter can be a value of USARTEx Word Length.

Definition at line 60 of file stm32h7xx_hal_usart.h.

Referenced by HAL_USART_Receive(), HAL_USART_Receive_IT(), HAL_USART_Transmit(), HAL_USART_Transmit_IT(), HAL_USART_TransmitReceive(), HAL_USART_TransmitReceive_IT(), and USART_SetConfig().

---

The documentation for this struct was generated from the following file:

• stm32h7xx_hal_usart.h