STM32L443xx HAL User Manual
|
RTC Configuration Structure definition. More...
#include <stm32l4xx_hal_rtc.h>
Data Fields | |
uint32_t | HourFormat |
uint32_t | AsynchPrediv |
uint32_t | SynchPrediv |
uint32_t | OutPut |
uint32_t | OutPutRemap |
uint32_t | OutPutPolarity |
uint32_t | OutPutType |
RTC Configuration Structure definition.
Definition at line 59 of file stm32l4xx_hal_rtc.h.
uint32_t RTC_InitTypeDef::AsynchPrediv |
Specifies the RTC Asynchronous Predivider value. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F
Definition at line 64 of file stm32l4xx_hal_rtc.h.
Referenced by HAL_RTC_Init().
uint32_t RTC_InitTypeDef::HourFormat |
Specifies the RTC Hour Format. This parameter can be a value of RTC_Hour_Formats
Definition at line 61 of file stm32l4xx_hal_rtc.h.
Referenced by HAL_RTC_Init().
uint32_t RTC_InitTypeDef::OutPut |
Specifies which signal will be routed to the RTC output. This parameter can be a value of RTCEx Output Selection Definitions
Definition at line 70 of file stm32l4xx_hal_rtc.h.
Referenced by HAL_RTC_Init().
uint32_t RTC_InitTypeDef::OutPutPolarity |
Specifies the polarity of the output signal. This parameter can be a value of RTC Output Polarity Definitions
Definition at line 76 of file stm32l4xx_hal_rtc.h.
Referenced by HAL_RTC_Init().
uint32_t RTC_InitTypeDef::OutPutRemap |
Specifies the remap for RTC output. This parameter can be a value of RTC Output ALARM OUT Remap
Definition at line 73 of file stm32l4xx_hal_rtc.h.
Referenced by HAL_RTC_Init().
uint32_t RTC_InitTypeDef::OutPutType |
Specifies the RTC Output Pin mode. This parameter can be a value of RTC Output Type ALARM OUT
Definition at line 79 of file stm32l4xx_hal_rtc.h.
Referenced by HAL_RTC_Init().
uint32_t RTC_InitTypeDef::SynchPrediv |
Specifies the RTC Synchronous Predivider value. This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF
Definition at line 67 of file stm32l4xx_hal_rtc.h.
Referenced by HAL_RTC_Init().