I2S_LL_EF_Init

Functions
ErrorStatus	LL_I2S_DeInit (SPI_TypeDef *SPIx)
	De-initialize the SPI/I2S registers to their default reset values.
ErrorStatus	LL_I2S_Init (SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct)
	Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct.
void	LL_I2S_StructInit (LL_I2S_InitTypeDef *I2S_InitStruct)
	Set each LL_I2S_InitTypeDef field to default value.
void	LL_I2S_ConfigPrescaler (SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity)
	Set linear and parity prescaler.

---

Function Documentation

void LL_I2S_ConfigPrescaler	(	SPI_TypeDef *	SPIx,
		uint32_t	PrescalerLinear,
		uint32_t	PrescalerParity
	)

Set linear and parity prescaler.

Note:

To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)
Check Audio frequency table and formulas inside Reference Manual (SPI/I2S).

Parameters:

SPIx	SPI Instance
PrescalerLinear	Value between Min_Data=0x00 and Max_Data=0xFF

Note:

PrescalerLinear '1' is not authorized with parity LL_I2S_PRESCALER_PARITY_ODD

Parameters:

PrescalerParity

This parameter can be one of the following values: LL_I2S_PRESCALER_PARITY_EVEN LL_I2S_PRESCALER_PARITY_ODD

Return values:

None

Definition at line 722 of file stm32h7xx_ll_spi.c.

References assert_param, IS_LL_I2S_PRESCALER_LINEAR, and IS_LL_I2S_PRESCALER_PARITY.

ErrorStatus LL_I2S_DeInit

(

SPI_TypeDef *

SPIx

)

De-initialize the SPI/I2S registers to their default reset values.

Parameters:

SPIx	SPI Instance

Return values:

An	ErrorStatus enumeration value: SUCCESS: SPI registers are de-initialized ERROR: SPI registers are not de-initialized

Definition at line 551 of file stm32h7xx_ll_spi.c.

References LL_SPI_DeInit().

ErrorStatus LL_I2S_Init	(	SPI_TypeDef *	SPIx,
		LL_I2S_InitTypeDef *	I2S_InitStruct
	)

Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct.

Note:

As some bits in I2S configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), SPI IP should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.

I2S (SPI) source clock must be ready before calling this function. Otherwise will results in wrong programming.

Parameters:

SPIx	SPI Instance
I2S_InitStruct	pointer to a LL_I2S_InitTypeDef structure

Return values:

An	ErrorStatus enumeration value: SUCCESS: SPI registers are Initialized ERROR: SPI registers are not Initialized

Definition at line 569 of file stm32h7xx_ll_spi.c.

References assert_param, LL_I2S_InitTypeDef::AudioFreq, LL_I2S_InitTypeDef::ClockPolarity, LL_I2S_InitTypeDef::DataFormat, I2S_I2SCFGR_CLEAR_MASK, IS_LL_I2S_AUDIO_FREQ, IS_LL_I2S_CKPOL, IS_LL_I2S_DATAFORMAT, IS_LL_I2S_MCLK_OUTPUT, IS_LL_I2S_MODE, IS_LL_I2S_STANDARD, LL_I2S_AUDIOFREQ_DEFAULT, LL_I2S_DATAFORMAT_16B, LL_I2S_MCLK_OUTPUT_ENABLE, LL_I2S_STANDARD_PCM_LONG, LL_I2S_STANDARD_PCM_SHORT, LL_RCC_GetSPIClockFreq(), LL_RCC_SPI123_CLKSOURCE, LL_RCC_SPI6_CLKSOURCE, LL_SPI_IsEnabled(), LL_I2S_InitTypeDef::MCLKOutput, LL_I2S_InitTypeDef::Mode, and LL_I2S_InitTypeDef::Standard.

void LL_I2S_StructInit

(

LL_I2S_InitTypeDef *

I2S_InitStruct

)

Set each LL_I2S_InitTypeDef field to default value.

Parameters:

I2S_InitStruct

pointer to a LL_I2S_InitTypeDef structure whose fields will be set to default values.

Return values:

None

Definition at line 699 of file stm32h7xx_ll_spi.c.

References LL_I2S_InitTypeDef::AudioFreq, LL_I2S_InitTypeDef::ClockPolarity, LL_I2S_InitTypeDef::DataFormat, LL_I2S_AUDIOFREQ_DEFAULT, LL_I2S_DATAFORMAT_16B, LL_I2S_MCLK_OUTPUT_DISABLE, LL_I2S_MODE_SLAVE_TX, LL_I2S_POLARITY_LOW, LL_I2S_STANDARD_PHILIPS, LL_I2S_InitTypeDef::MCLKOutput, LL_I2S_InitTypeDef::Mode, and LL_I2S_InitTypeDef::Standard.