Timer Complementary Output Compare functions. More...

Functions
HAL_StatusTypeDef	HAL_TIMEx_OCN_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Output Compare signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Starts the TIM Output Compare signal generation in interrupt mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation in interrupt mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Start_DMA (TIM_HandleTypeDef htim, uint32_t Channel, uint32_t pData, uint16_t Length)
	Starts the TIM Output Compare signal generation in DMA mode on the complementary output.
HAL_StatusTypeDef	HAL_TIMEx_OCN_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
	Stops the TIM Output Compare signal generation in DMA mode on the complementary output.

Detailed Description

Timer Complementary Output Compare functions.

  ==============================================================================
              ##### Timer Complementary Output Compare functions #####
  ==============================================================================
  [..]
    This section provides functions allowing to:
    (+) Start the Complementary Output Compare/PWM.
    (+) Stop the Complementary Output Compare/PWM.
    (+) Start the Complementary Output Compare/PWM and enable interrupts.
    (+) Stop the Complementary Output Compare/PWM and disable interrupts.
    (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
    (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.

Function Documentation

HAL_StatusTypeDef HAL_TIMEx_OCN_Start	(	TIM_HandleTypeDef *	htim,
		uint32_t	Channel
	)

Starts the TIM Output Compare signal generation on the complementary output.

Parameters:

htim	TIM Output Compare handle
Channel	TIM Channel to be enabled This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected

Return values:

HAL status

Definition at line 626 of file stm32l4xx_hal_tim_ex.c.

References __HAL_TIM_ENABLE, __HAL_TIM_MOE_ENABLE, assert_param, HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, IS_TIM_SLAVEMODE_TRIGGER_ENABLED, TIM_CCxN_ENABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_N_STATE_GET, and TIM_CHANNEL_N_STATE_SET.

HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA	(	TIM_HandleTypeDef *	htim,
		uint32_t	Channel,
		uint32_t *	pData,
		uint16_t	Length
	)

Starts the TIM Output Compare signal generation in DMA mode on the complementary output.

Parameters:

htim	TIM Output Compare handle
Channel	TIM Channel to be enabled This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected
pData	The source Buffer address.
Length	The length of data to be transferred from memory to TIM peripheral

Return values:

HAL status

Definition at line 871 of file stm32l4xx_hal_tim_ex.c.

References __HAL_TIM_ENABLE, __HAL_TIM_ENABLE_DMA, __HAL_TIM_MOE_ENABLE, assert_param, HAL_DMA_Start_IT(), HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::hdma, __TIM_HandleTypeDef::Instance, IS_TIM_SLAVEMODE_TRIGGER_ENABLED, TIM_CCxN_ENABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_N_STATE_GET, TIM_CHANNEL_N_STATE_SET, TIM_DMA_CC1, TIM_DMA_CC2, TIM_DMA_CC3, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, TIM_DMA_ID_CC3, TIM_DMADelayPulseHalfCplt(), TIM_DMADelayPulseNCplt(), TIM_DMAErrorCCxN(), __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT	(	TIM_HandleTypeDef *	htim,
		uint32_t	Channel
	)

Starts the TIM Output Compare signal generation in interrupt mode on the complementary output.

Parameters:

htim	TIM OC handle
Channel	TIM Channel to be enabled This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected

Return values:

HAL status

Definition at line 709 of file stm32l4xx_hal_tim_ex.c.

References __HAL_TIM_ENABLE, __HAL_TIM_ENABLE_IT, __HAL_TIM_MOE_ENABLE, assert_param, HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, IS_TIM_SLAVEMODE_TRIGGER_ENABLED, TIM_CCxN_ENABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_N_STATE_GET, TIM_CHANNEL_N_STATE_SET, TIM_IT_BREAK, TIM_IT_CC1, TIM_IT_CC2, and TIM_IT_CC3.

HAL_StatusTypeDef HAL_TIMEx_OCN_Stop	(	TIM_HandleTypeDef *	htim,
		uint32_t	Channel
	)

Stops the TIM Output Compare signal generation on the complementary output.

Parameters:

htim	TIM handle
Channel	TIM Channel to be disabled This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected

Return values:

HAL status

Definition at line 677 of file stm32l4xx_hal_tim_ex.c.

References __HAL_TIM_DISABLE, __HAL_TIM_MOE_DISABLE, assert_param, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCxN_DISABLE, TIM_CCxNChannelCmd(), and TIM_CHANNEL_N_STATE_SET.

HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA	(	TIM_HandleTypeDef *	htim,
		uint32_t	Channel
	)

Stops the TIM Output Compare signal generation in DMA mode on the complementary output.

Parameters:

htim	TIM Output Compare handle
Channel	TIM Channel to be disabled This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected

Return values:

HAL status

Definition at line 1008 of file stm32l4xx_hal_tim_ex.c.

References __HAL_TIM_DISABLE, __HAL_TIM_DISABLE_DMA, __HAL_TIM_MOE_DISABLE, assert_param, HAL_DMA_Abort_IT(), HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::hdma, __TIM_HandleTypeDef::Instance, TIM_CCxN_DISABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_N_STATE_SET, TIM_DMA_CC1, TIM_DMA_CC2, TIM_DMA_CC3, TIM_DMA_ID_CC1, TIM_DMA_ID_CC2, and TIM_DMA_ID_CC3.

HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT	(	TIM_HandleTypeDef *	htim,
		uint32_t	Channel
	)

Stops the TIM Output Compare signal generation in interrupt mode on the complementary output.

Parameters:

htim	TIM Output Compare handle
Channel	TIM Channel to be disabled This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected

Return values:

HAL status

Definition at line 796 of file stm32l4xx_hal_tim_ex.c.

References __HAL_TIM_DISABLE, __HAL_TIM_DISABLE_IT, __HAL_TIM_MOE_DISABLE, assert_param, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCxN_DISABLE, TIM_CCxNChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_3, TIM_CHANNEL_N_STATE_SET, TIM_IT_BREAK, TIM_IT_CC1, TIM_IT_CC2, and TIM_IT_CC3.

Functions

Detailed Description

Function Documentation