|
STM32L443xx HAL User Manual
|
Header file of TIM HAL Extended module. More...
#include "stm32l4xx_hal_def.h"Go to the source code of this file.
Data Structures | |
| struct | TIM_HallSensor_InitTypeDef |
| TIM Hall sensor Configuration Structure definition. More... | |
| struct | TIMEx_BreakInputConfigTypeDef |
| TIM Break/Break2 input configuration. More... | |
Defines | |
| #define | TIM_TIM1_ETR_ADC1_NONE 0x00000000U /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/ |
| #define | TIM_TIM1_ETR_ADC1_AWD1 TIM1_OR1_ETR_ADC1_RMP_0 /* !< TIM1_ETR is connected to ADC1 AWD1 */ |
| #define | TIM_TIM1_ETR_ADC1_AWD2 TIM1_OR1_ETR_ADC1_RMP_1 /* !< TIM1_ETR is connected to ADC1 AWD2 */ |
| #define | TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */ |
| #define | TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1 TI1 is connected to GPIO */ |
| #define | TIM_TIM1_TI1_COMP1 TIM1_OR1_TI1_RMP /* !< TIM1 TI1 is connected to COMP1 */ |
| #define | TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */ |
| #define | TIM_TIM1_ETR_COMP1 TIM1_OR2_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */ |
| #define | TIM_TIM1_ETR_COMP2 TIM1_OR2_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */ |
| #define | TIM_TIM2_ITR1_NONE 0x00000000U /* !< No internal trigger on TIM2_ITR1 */ |
| #define | TIM_TIM2_ITR1_USB_SOF TIM2_OR1_ITR1_RMP /* !< TIM2_ITR1 is connected to USB SOF */ |
| #define | TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */ |
| #define | TIM_TIM2_ETR_LSE TIM2_OR1_ETR1_RMP /* !< TIM2_ETR is connected to LSE */ |
| #define | TIM_TIM2_ETR_COMP1 TIM2_OR2_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */ |
| #define | TIM_TIM2_ETR_COMP2 TIM2_OR2_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */ |
| #define | TIM_TIM2_TI4_GPIO 0x00000000U /* !< TIM2 TI4 is connected to GPIO */ |
| #define | TIM_TIM2_TI4_COMP1 TIM2_OR1_TI4_RMP_0 /* !< TIM2 TI4 is connected to COMP1 output */ |
| #define | TIM_TIM2_TI4_COMP2 TIM2_OR1_TI4_RMP_1 /* !< TIM2 TI4 is connected to COMP2 output */ |
| #define | TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0) /* !< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */ |
| #define | TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15 TI1 is connected to GPIO */ |
| #define | TIM_TIM15_TI1_LSE TIM15_OR1_TI1_RMP /* !< TIM15 TI1 is connected to LSE */ |
| #define | TIM_TIM15_ENCODERMODE_NONE 0x00000000U /* !< No redirection */ |
| #define | TIM_TIM15_ENCODERMODE_TIM2 TIM15_OR1_ENCODER_MODE_0 /* !< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */ |
| #define | TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16 TI1 is connected to GPIO */ |
| #define | TIM_TIM16_TI1_LSI TIM16_OR1_TI1_RMP_0 /* !< TIM16 TI1 is connected to LSI */ |
| #define | TIM_TIM16_TI1_LSE TIM16_OR1_TI1_RMP_1 /* !< TIM16 TI1 is connected to LSE */ |
| #define | TIM_TIM16_TI1_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to RTC wakeup interrupt */ |
| #define | TIM_TIM16_TI1_MSI TIM16_OR1_TI1_RMP_2 /* !< TIM16 TI1 is connected to MSI */ |
| #define | TIM_TIM16_TI1_HSE_32 (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0) /* !< TIM16 TI1 is connected to HSE div 32 */ |
| #define | TIM_TIM16_TI1_MCO (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1) /* !< TIM16 TI1 is connected to MCO */ |
| #define | TIM_BREAKINPUT_BRK 0x00000001U |
| #define | TIM_BREAKINPUT_BRK2 0x00000002U |
| #define | TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */ |
| #define | TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */ |
| #define | TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */ |
| #define | TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U |
| #define | TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U |
| #define | TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U |
| #define | TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U |
| #define | IS_TIM_REMAP(__REMAP__) (((__REMAP__) <= (uint32_t)0x0001C01F)) |
| #define | IS_TIM_BREAKINPUT(__BREAKINPUT__) |
| #define | IS_TIM_BREAKINPUTSOURCE(__SOURCE__) |
| #define | IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) |
| #define | IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) |
Functions | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Init (TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) |
| Initializes the TIM Hall Sensor Interface and initialize the associated handle. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_DeInit (TIM_HandleTypeDef *htim) |
| DeInitializes the TIM Hall Sensor interface. | |
| __weak void | HAL_TIMEx_HallSensor_MspInit (TIM_HandleTypeDef *htim) |
| Initializes the TIM Hall Sensor MSP. | |
| __weak void | HAL_TIMEx_HallSensor_MspDeInit (TIM_HandleTypeDef *htim) |
| DeInitializes TIM Hall Sensor MSP. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Start (TIM_HandleTypeDef *htim) |
| Starts the TIM Hall Sensor Interface. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Stop (TIM_HandleTypeDef *htim) |
| Stops the TIM Hall sensor Interface. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Start_IT (TIM_HandleTypeDef *htim) |
| Starts the TIM Hall Sensor Interface in interrupt mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Stop_IT (TIM_HandleTypeDef *htim) |
| Stops the TIM Hall Sensor Interface in interrupt mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Start_DMA (TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) |
| Starts the TIM Hall Sensor Interface in DMA mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Stop_DMA (TIM_HandleTypeDef *htim) |
| Stops the TIM Hall Sensor Interface in DMA mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_OCN_Start (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Starts the TIM Output Compare signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OCN_Stop (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Stops the TIM Output Compare signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OCN_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Starts the TIM Output Compare signal generation in interrupt mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OCN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Stops the TIM Output Compare signal generation in interrupt mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OCN_Start_DMA (TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) |
| Starts the TIM Output Compare signal generation in DMA mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OCN_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Stops the TIM Output Compare signal generation in DMA mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_PWMN_Start (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Starts the PWM signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_PWMN_Stop (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Stops the PWM signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_PWMN_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Starts the PWM signal generation in interrupt mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Stops the PWM signal generation in interrupt mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_PWMN_Start_DMA (TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) |
| Starts the TIM PWM signal generation in DMA mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_PWMN_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel) |
| Stops the TIM PWM signal generation in DMA mode on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Start (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Starts the TIM One Pulse signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Stop (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Stops the TIM One Pulse signal generation on the complementary output. | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Start_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Starts the TIM One Pulse signal generation in interrupt mode on the complementary channel. | |
| HAL_StatusTypeDef | HAL_TIMEx_OnePulseN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel) |
| Stops the TIM One Pulse signal generation in interrupt mode on the complementary channel. | |
| HAL_StatusTypeDef | HAL_TIMEx_ConfigCommutEvent (TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) |
| Configure the TIM commutation event sequence. | |
| HAL_StatusTypeDef | HAL_TIMEx_ConfigCommutEvent_IT (TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) |
| Configure the TIM commutation event sequence with interrupt. | |
| HAL_StatusTypeDef | HAL_TIMEx_ConfigCommutEvent_DMA (TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) |
| Configure the TIM commutation event sequence with DMA. | |
| HAL_StatusTypeDef | HAL_TIMEx_MasterConfigSynchronization (TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef *sMasterConfig) |
| Configures the TIM in master mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_ConfigBreakDeadTime (TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) |
| Configures the Break feature, dead time, Lock level, OSSI/OSSR State and the AOE(automatic output enable). | |
| HAL_StatusTypeDef | HAL_TIMEx_ConfigBreakInput (TIM_HandleTypeDef *htim, uint32_t BreakInput, TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) |
| Configures the break input source. | |
| HAL_StatusTypeDef | HAL_TIMEx_GroupChannel5 (TIM_HandleTypeDef *htim, uint32_t Channels) |
| Group channel 5 and channel 1, 2 or 3. | |
| HAL_StatusTypeDef | HAL_TIMEx_RemapConfig (TIM_HandleTypeDef *htim, uint32_t Remap) |
| Configures the TIMx Remapping input capabilities. | |
| __weak void | HAL_TIMEx_CommutCallback (TIM_HandleTypeDef *htim) |
| Hall commutation changed callback in non-blocking mode. | |
| __weak void | HAL_TIMEx_CommutHalfCpltCallback (TIM_HandleTypeDef *htim) |
| Hall commutation changed half complete callback in non-blocking mode. | |
| __weak void | HAL_TIMEx_BreakCallback (TIM_HandleTypeDef *htim) |
| Hall Break detection callback in non-blocking mode. | |
| __weak void | HAL_TIMEx_Break2Callback (TIM_HandleTypeDef *htim) |
| Hall Break2 detection callback in non blocking mode. | |
| HAL_TIM_StateTypeDef | HAL_TIMEx_HallSensor_GetState (TIM_HandleTypeDef *htim) |
| Return the TIM Hall Sensor interface handle state. | |
| HAL_TIM_ChannelStateTypeDef | HAL_TIMEx_GetChannelNState (TIM_HandleTypeDef *htim, uint32_t ChannelN) |
| Return actual state of the TIM complementary channel. | |
| void | TIMEx_DMACommutationCplt (DMA_HandleTypeDef *hdma) |
| TIM DMA Commutation callback. | |
| void | TIMEx_DMACommutationHalfCplt (DMA_HandleTypeDef *hdma) |
| TIM DMA Commutation half complete callback. | |
Header file of TIM HAL Extended module.
Copyright (c) 2017 STMicroelectronics. All rights reserved.
This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.
Definition in file stm32l4xx_hal_tim_ex.h.
1.7.6.1