|
STM32L443xx HAL User Manual
|
Timer Hall Sensor functions. More...
Functions | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Init (TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig) |
| Initializes the TIM Hall Sensor Interface and initialize the associated handle. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_DeInit (TIM_HandleTypeDef *htim) |
| DeInitializes the TIM Hall Sensor interface. | |
| __weak void | HAL_TIMEx_HallSensor_MspInit (TIM_HandleTypeDef *htim) |
| Initializes the TIM Hall Sensor MSP. | |
| __weak void | HAL_TIMEx_HallSensor_MspDeInit (TIM_HandleTypeDef *htim) |
| DeInitializes TIM Hall Sensor MSP. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Start (TIM_HandleTypeDef *htim) |
| Starts the TIM Hall Sensor Interface. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Stop (TIM_HandleTypeDef *htim) |
| Stops the TIM Hall sensor Interface. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Start_IT (TIM_HandleTypeDef *htim) |
| Starts the TIM Hall Sensor Interface in interrupt mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Stop_IT (TIM_HandleTypeDef *htim) |
| Stops the TIM Hall Sensor Interface in interrupt mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Start_DMA (TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) |
| Starts the TIM Hall Sensor Interface in DMA mode. | |
| HAL_StatusTypeDef | HAL_TIMEx_HallSensor_Stop_DMA (TIM_HandleTypeDef *htim) |
| Stops the TIM Hall Sensor Interface in DMA mode. | |
Timer Hall Sensor functions.
==============================================================================
##### Timer Hall Sensor functions #####
==============================================================================
[..]
This section provides functions allowing to:
(+) Initialize and configure TIM HAL Sensor.
(+) De-initialize TIM HAL Sensor.
(+) Start the Hall Sensor Interface.
(+) Stop the Hall Sensor Interface.
(+) Start the Hall Sensor Interface and enable interrupts.
(+) Stop the Hall Sensor Interface and disable interrupts.
(+) Start the Hall Sensor Interface and enable DMA transfers.
(+) Stop the Hall Sensor Interface and disable DMA transfers.
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit | ( | TIM_HandleTypeDef * | htim | ) |
DeInitializes the TIM Hall Sensor interface.
| htim | TIM Hall Sensor Interface handle |
| HAL | status |
Definition at line 241 of file stm32l4xx_hal_tim_ex.c.
References __HAL_TIM_DISABLE, assert_param, __TIM_HandleTypeDef::DMABurstState, HAL_DMA_BURST_STATE_RESET, HAL_TIM_CHANNEL_STATE_RESET, HAL_TIM_STATE_BUSY, HAL_TIM_STATE_RESET, HAL_TIMEx_HallSensor_MspDeInit(), __TIM_HandleTypeDef::HallSensor_MspDeInitCallback, __TIM_HandleTypeDef::Instance, __TIM_HandleTypeDef::State, TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_SET, and TIM_CHANNEL_STATE_SET.
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init | ( | TIM_HandleTypeDef * | htim, |
| TIM_HallSensor_InitTypeDef * | sConfig | ||
| ) |
Initializes the TIM Hall Sensor Interface and initialize the associated handle.
| htim | TIM Hall Sensor Interface handle |
| sConfig | TIM Hall Sensor configuration structure |
| HAL | status |
Definition at line 140 of file stm32l4xx_hal_tim_ex.c.
References assert_param, TIM_Base_InitTypeDef::AutoReloadPreload, TIM_Base_InitTypeDef::ClockDivision, TIM_HallSensor_InitTypeDef::Commutation_Delay, TIM_Base_InitTypeDef::CounterMode, __TIM_HandleTypeDef::DMABurstState, HAL_DMA_BURST_STATE_READY, HAL_TIM_CHANNEL_STATE_READY, HAL_TIM_STATE_BUSY, HAL_TIM_STATE_READY, HAL_TIM_STATE_RESET, HAL_TIMEx_HallSensor_MspInit(), __TIM_HandleTypeDef::HallSensor_MspInitCallback, TIM_HallSensor_InitTypeDef::IC1Filter, TIM_HallSensor_InitTypeDef::IC1Polarity, TIM_HallSensor_InitTypeDef::IC1Prescaler, __TIM_HandleTypeDef::Init, __TIM_HandleTypeDef::Instance, IS_TIM_AUTORELOAD_PRELOAD, IS_TIM_CLOCKDIVISION_DIV, IS_TIM_COUNTER_MODE, IS_TIM_IC_FILTER, IS_TIM_IC_POLARITY, IS_TIM_IC_PRESCALER, __TIM_HandleTypeDef::Lock, TIM_OC_InitTypeDef::OCFastMode, TIM_OC_InitTypeDef::OCIdleState, TIM_OC_InitTypeDef::OCMode, TIM_OC_InitTypeDef::OCNIdleState, TIM_OC_InitTypeDef::OCNPolarity, TIM_OC_InitTypeDef::OCPolarity, TIM_OC_InitTypeDef::Pulse, __TIM_HandleTypeDef::State, TIM_Base_SetConfig(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_SET, TIM_ICSELECTION_TRC, TIM_OC2_SetConfig(), TIM_OCFAST_DISABLE, TIM_OCIDLESTATE_RESET, TIM_OCMODE_PWM2, TIM_OCNIDLESTATE_RESET, TIM_OCNPOLARITY_HIGH, TIM_OCPOLARITY_HIGH, TIM_ResetCallback(), TIM_SLAVEMODE_RESET, TIM_TI1_SetConfig(), TIM_TRGO_OC2REF, and TIM_TS_TI1F_ED.
| void HAL_TIMEx_HallSensor_MspDeInit | ( | TIM_HandleTypeDef * | htim | ) |
DeInitializes TIM Hall Sensor MSP.
| htim | TIM Hall Sensor Interface handle |
| None |
Definition at line 301 of file stm32l4xx_hal_tim_ex.c.
Referenced by HAL_TIM_UnRegisterCallback(), and HAL_TIMEx_HallSensor_DeInit().
| void HAL_TIMEx_HallSensor_MspInit | ( | TIM_HandleTypeDef * | htim | ) |
Initializes the TIM Hall Sensor MSP.
| htim | TIM Hall Sensor Interface handle |
| None |
Definition at line 286 of file stm32l4xx_hal_tim_ex.c.
Referenced by HAL_TIM_UnRegisterCallback(), and HAL_TIMEx_HallSensor_Init().
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start | ( | TIM_HandleTypeDef * | htim | ) |
Starts the TIM Hall Sensor Interface.
| htim | TIM Hall Sensor Interface handle |
| HAL | status |
Definition at line 316 of file stm32l4xx_hal_tim_ex.c.
References __HAL_TIM_ENABLE, assert_param, HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, IS_TIM_SLAVEMODE_TRIGGER_ENABLED, TIM_CCx_ENABLE, TIM_CCxChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_GET, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_GET, and TIM_CHANNEL_STATE_SET.
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA | ( | TIM_HandleTypeDef * | htim, |
| uint32_t * | pData, | ||
| uint16_t | Length | ||
| ) |
Starts the TIM Hall Sensor Interface in DMA mode.
| htim | TIM Hall Sensor Interface handle |
| pData | The destination Buffer address. |
| Length | The length of data to be transferred from TIM peripheral to memory. |
| HAL | status |
Definition at line 488 of file stm32l4xx_hal_tim_ex.c.
References __HAL_TIM_ENABLE, __HAL_TIM_ENABLE_DMA, assert_param, HAL_DMA_Start_IT(), HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::hdma, __TIM_HandleTypeDef::Instance, IS_TIM_SLAVEMODE_TRIGGER_ENABLED, TIM_CCx_ENABLE, TIM_CCxChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_N_STATE_GET, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_GET, TIM_CHANNEL_STATE_SET, TIM_DMA_CC1, TIM_DMA_ID_CC1, TIM_DMACaptureCplt(), TIM_DMACaptureHalfCplt(), TIM_DMAError(), __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT | ( | TIM_HandleTypeDef * | htim | ) |
Starts the TIM Hall Sensor Interface in interrupt mode.
| htim | TIM Hall Sensor Interface handle |
| HAL | status |
Definition at line 398 of file stm32l4xx_hal_tim_ex.c.
References __HAL_TIM_ENABLE, __HAL_TIM_ENABLE_IT, assert_param, HAL_TIM_CHANNEL_STATE_BUSY, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, IS_TIM_SLAVEMODE_TRIGGER_ENABLED, TIM_CCx_ENABLE, TIM_CCxChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_GET, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_GET, TIM_CHANNEL_STATE_SET, and TIM_IT_CC1.
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop | ( | TIM_HandleTypeDef * | htim | ) |
Stops the TIM Hall sensor Interface.
| htim | TIM Hall Sensor Interface handle |
| HAL | status |
Definition at line 370 of file stm32l4xx_hal_tim_ex.c.
References __HAL_TIM_DISABLE, assert_param, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCx_DISABLE, TIM_CCxChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_SET, and TIM_CHANNEL_STATE_SET.
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA | ( | TIM_HandleTypeDef * | htim | ) |
Stops the TIM Hall Sensor Interface in DMA mode.
| htim | TIM Hall Sensor Interface handle |
| HAL | status |
Definition at line 564 of file stm32l4xx_hal_tim_ex.c.
References __HAL_TIM_DISABLE, __HAL_TIM_DISABLE_DMA, assert_param, HAL_DMA_Abort_IT(), HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::hdma, __TIM_HandleTypeDef::Instance, TIM_CCx_DISABLE, TIM_CCxChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_SET, TIM_DMA_CC1, and TIM_DMA_ID_CC1.
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT | ( | TIM_HandleTypeDef * | htim | ) |
Stops the TIM Hall Sensor Interface in interrupt mode.
| htim | TIM Hall Sensor Interface handle |
| HAL | status |
Definition at line 455 of file stm32l4xx_hal_tim_ex.c.
References __HAL_TIM_DISABLE, __HAL_TIM_DISABLE_IT, assert_param, HAL_TIM_CHANNEL_STATE_READY, __TIM_HandleTypeDef::Instance, TIM_CCx_DISABLE, TIM_CCxChannelCmd(), TIM_CHANNEL_1, TIM_CHANNEL_2, TIM_CHANNEL_N_STATE_SET, TIM_CHANNEL_STATE_SET, and TIM_IT_CC1.
1.7.6.1