IO operation functions

Data transfers functions. More...

Functions
HAL_StatusTypeDef	HAL_SPI_Transmit (SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
	Transmit an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_SPI_Receive (SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
	Receive an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_SPI_TransmitReceive (SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
	Transmit and Receive an amount of data in blocking mode.
HAL_StatusTypeDef	HAL_SPI_Transmit_IT (SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
	Transmit an amount of data in non-blocking mode with Interrupt.
HAL_StatusTypeDef	HAL_SPI_Receive_IT (SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
	Receive an amount of data in non-blocking mode with Interrupt.
HAL_StatusTypeDef	HAL_SPI_TransmitReceive_IT (SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
	Transmit and Receive an amount of data in non-blocking mode with Interrupt.
HAL_StatusTypeDef	HAL_SPI_Transmit_DMA (SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
	Transmit an amount of data in non-blocking mode with DMA.
HAL_StatusTypeDef	HAL_SPI_Receive_DMA (SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
	Receive an amount of data in non-blocking mode with DMA.
HAL_StatusTypeDef	HAL_SPI_TransmitReceive_DMA (SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
	Transmit and Receive an amount of data in non-blocking mode with DMA.
HAL_StatusTypeDef	HAL_SPI_Abort (SPI_HandleTypeDef *hspi)
	Abort ongoing transfer (blocking mode).
HAL_StatusTypeDef	HAL_SPI_Abort_IT (SPI_HandleTypeDef *hspi)
	Abort ongoing transfer (Interrupt mode).
HAL_StatusTypeDef	HAL_SPI_DMAPause (SPI_HandleTypeDef *hspi)
	Pause the DMA Transfer.
HAL_StatusTypeDef	HAL_SPI_DMAResume (SPI_HandleTypeDef *hspi)
	Resume the DMA Transfer.
HAL_StatusTypeDef	HAL_SPI_DMAStop (SPI_HandleTypeDef *hspi)
	Stop the DMA Transfer.
void	HAL_SPI_IRQHandler (SPI_HandleTypeDef *hspi)
	Handle SPI interrupt request.
__weak void	HAL_SPI_TxCpltCallback (SPI_HandleTypeDef *hspi)
	Tx Transfer completed callback.
__weak void	HAL_SPI_RxCpltCallback (SPI_HandleTypeDef *hspi)
	Rx Transfer completed callback.
__weak void	HAL_SPI_TxRxCpltCallback (SPI_HandleTypeDef *hspi)
	Tx and Rx Transfer completed callback.
__weak void	HAL_SPI_TxHalfCpltCallback (SPI_HandleTypeDef *hspi)
	Tx Half Transfer completed callback.
__weak void	HAL_SPI_RxHalfCpltCallback (SPI_HandleTypeDef *hspi)
	Rx Half Transfer completed callback.
__weak void	HAL_SPI_TxRxHalfCpltCallback (SPI_HandleTypeDef *hspi)
	Tx and Rx Half Transfer callback.
__weak void	HAL_SPI_ErrorCallback (SPI_HandleTypeDef *hspi)
	SPI error callback.
__weak void	HAL_SPI_AbortCpltCallback (SPI_HandleTypeDef *hspi)
	SPI Abort Complete callback.

---

Detailed Description

Data transfers functions.

  ==============================================================================
                      ##### IO operation functions #####
 ===============================================================================
 [..]
    This subsection provides a set of functions allowing to manage the SPI
    data transfers.

    [..] The SPI supports master and slave mode :

    (#) There are two modes of transfer:
       (++) Blocking mode: The communication is performed in polling mode.
            The HAL status of all data processing is returned by the same function
            after finishing transfer.
       (++) No-Blocking mode: The communication is performed using Interrupts
            or DMA, These APIs return the HAL status.
            The end of the data processing will be indicated through the
            dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
            using DMA mode.
            The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
            will be executed respectively at the end of the transmit or Receive process
            The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected

    (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
        exist for 1Line (simplex) and 2Lines (full duplex) modes.

---

Function Documentation

HAL_StatusTypeDef HAL_SPI_Abort

(

SPI_HandleTypeDef *

hspi

)

Abort ongoing transfer (blocking mode).

Parameters:

hspi	SPI handle.

Note:

This procedure could be used for aborting any ongoing transfer (Tx and Rx), started in Interrupt or DMA mode. This procedure performs following operations :

• Disable SPI Interrupts (depending of transfer direction)
• Disable the DMA transfer in the peripheral register (if enabled)
• Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
• Set handle State to READY

This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.

Return values:

HAL

status

Definition at line 1994 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_CLEAR_FREFLAG, __HAL_SPI_CLEAR_OVRFLAG, __HAL_SPI_DISABLE, __SPI_HandleTypeDef::ErrorCode, HAL_DMA_Abort(), HAL_SPI_ERROR_ABORT, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_ABORT, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::hdmarx, __SPI_HandleTypeDef::hdmatx, __SPI_HandleTypeDef::Instance, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, SPI_AbortRx_ISR(), SPI_AbortTx_ISR(), SPI_DEFAULT_TIMEOUT, SPI_FLAG_TXE, __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

HAL_StatusTypeDef HAL_SPI_Abort_IT

(

SPI_HandleTypeDef *

hspi

)

Abort ongoing transfer (Interrupt mode).

Parameters:

hspi	SPI handle.

Note:

This procedure could be used for aborting any ongoing transfer (Tx and Rx), started in Interrupt or DMA mode. This procedure performs following operations :

• Disable SPI Interrupts (depending of transfer direction)
• Disable the DMA transfer in the peripheral register (if enabled)
• Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
• Set handle State to READY
• At abort completion, call user abort complete callback

This procedure is executed in Interrupt mode, meaning that abort procedure could be considered as completed only when user abort complete callback is executed (not when exiting function).

Return values:

HAL

status

Definition at line 2139 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_CLEAR_FREFLAG, __HAL_SPI_CLEAR_OVRFLAG, __SPI_HandleTypeDef::AbortCpltCallback, __SPI_HandleTypeDef::ErrorCode, HAL_DMA_Abort_IT(), HAL_SPI_AbortCpltCallback(), HAL_SPI_ERROR_ABORT, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_ABORT, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::hdmarx, __SPI_HandleTypeDef::hdmatx, __SPI_HandleTypeDef::Instance, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, SPI_AbortRx_ISR(), SPI_AbortTx_ISR(), SPI_DEFAULT_TIMEOUT, SPI_DMARxAbortCallback(), SPI_DMATxAbortCallback(), __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __DMA_HandleTypeDef::XferAbortCallback.

void HAL_SPI_AbortCpltCallback

(

SPI_HandleTypeDef *

hspi

)

SPI Abort Complete callback.

Parameters:

hspi	SPI handle.

Return values:

None

Definition at line 2601 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Abort_IT(), HAL_SPI_Init(), HAL_SPI_UnRegisterCallback(), SPI_DMARxAbortCallback(), and SPI_DMATxAbortCallback().

HAL_StatusTypeDef HAL_SPI_DMAPause

(

SPI_HandleTypeDef *

hspi

)

Pause the DMA Transfer.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for the specified SPI module.

Return values:

HAL

status

Definition at line 2300 of file stm32f4xx_hal_spi.c.

References __SPI_HandleTypeDef::Instance.

HAL_StatusTypeDef HAL_SPI_DMAResume

(

SPI_HandleTypeDef *

hspi

)

Resume the DMA Transfer.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for the specified SPI module.

Return values:

HAL

status

Definition at line 2320 of file stm32f4xx_hal_spi.c.

References __SPI_HandleTypeDef::Instance.

HAL_StatusTypeDef HAL_SPI_DMAStop

(

SPI_HandleTypeDef *

hspi

)

Stop the DMA Transfer.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for the specified SPI module.

Return values:

HAL

status

Definition at line 2340 of file stm32f4xx_hal_spi.c.

References __SPI_HandleTypeDef::ErrorCode, HAL_DMA_Abort(), HAL_SPI_ERROR_DMA, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::hdmarx, __SPI_HandleTypeDef::hdmatx, __SPI_HandleTypeDef::Instance, and __SPI_HandleTypeDef::State.

void HAL_SPI_ErrorCallback

(

SPI_HandleTypeDef *

hspi

)

SPI error callback.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.

Return values:

None

Definition at line 2583 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Init(), HAL_SPI_IRQHandler(), HAL_SPI_UnRegisterCallback(), SPI_CloseRx_ISR(), SPI_CloseRxTx_ISR(), SPI_CloseTx_ISR(), SPI_DMAAbortOnError(), SPI_DMAError(), SPI_DMAReceiveCplt(), SPI_DMATransmitCplt(), and SPI_DMATransmitReceiveCplt().

void HAL_SPI_IRQHandler

(

SPI_HandleTypeDef *

hspi

)

Handle SPI interrupt request.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for the specified SPI module.

Return values:

None

Definition at line 2380 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_CLEAR_FREFLAG, __HAL_SPI_CLEAR_MODFFLAG, __HAL_SPI_CLEAR_OVRFLAG, __HAL_SPI_DISABLE_IT, __SPI_HandleTypeDef::ErrorCallback, __SPI_HandleTypeDef::ErrorCode, HAL_DMA_Abort_IT(), HAL_SPI_ERROR_ABORT, HAL_SPI_ERROR_FRE, HAL_SPI_ERROR_MODF, HAL_SPI_ERROR_NONE, HAL_SPI_ERROR_OVR, HAL_SPI_ErrorCallback(), HAL_SPI_STATE_BUSY_TX, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::hdmarx, __SPI_HandleTypeDef::hdmatx, __SPI_HandleTypeDef::Instance, __SPI_HandleTypeDef::RxISR, SPI_CHECK_FLAG, SPI_CHECK_IT_SOURCE, SPI_DMAAbortOnError(), SPI_FLAG_FRE, SPI_FLAG_MODF, SPI_FLAG_OVR, SPI_FLAG_RXNE, SPI_FLAG_TXE, SPI_IT_ERR, SPI_IT_RXNE, SPI_IT_TXE, __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, and __DMA_HandleTypeDef::XferAbortCallback.

HAL_StatusTypeDef HAL_SPI_Receive	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pData,
		uint16_t	Size,
		uint32_t	Timeout
	)

Receive an amount of data in blocking mode.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pData	pointer to data buffer
Size	amount of data to be received
Timeout	Timeout duration

Return values:

HAL

status

Definition at line 936 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_CLEAR_CRCERRFLAG, __HAL_SPI_DISABLE, __HAL_SPI_ENABLE, __HAL_SPI_GET_FLAG, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::DataSize, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_GetTick(), HAL_SPI_ERROR_CRC, HAL_SPI_ERROR_FLAG, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_RX, HAL_SPI_STATE_READY, HAL_SPI_TransmitReceive(), __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, SPI_InitTypeDef::Mode, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_1LINE_RX, SPI_CRCCALCULATION_ENABLE, SPI_DATASIZE_16BIT, SPI_DATASIZE_8BIT, SPI_DIRECTION_1LINE, SPI_DIRECTION_2LINES, SPI_EndRxTransaction(), SPI_FLAG_CRCERR, SPI_FLAG_RXNE, SPI_MODE_MASTER, SPI_RESET_CRC, SPI_WaitFlagStateUntilTimeout(), __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __SPI_HandleTypeDef::TxXferSize.

HAL_StatusTypeDef HAL_SPI_Receive_DMA	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pData,
		uint16_t	Size
	)

Receive an amount of data in non-blocking mode with DMA.

Note:

In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pData	pointer to data buffer

Note:

When the CRC feature is enabled the pData Length must be Size + 1.

Parameters:

Size	amount of data to be sent

Return values:

HAL

status

Definition at line 1733 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_DISABLE, __HAL_SPI_ENABLE, __HAL_SPI_ENABLE_IT, assert_param, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_DMA_Start_IT(), HAL_SPI_ERROR_DMA, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_RX, HAL_SPI_STATE_READY, HAL_SPI_TransmitReceive_DMA(), __SPI_HandleTypeDef::hdmarx, __SPI_HandleTypeDef::hdmatx, __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, IS_SPI_DMA_HANDLE, SPI_InitTypeDef::Mode, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_1LINE_RX, SPI_CRCCALCULATION_ENABLE, SPI_DIRECTION_1LINE, SPI_DIRECTION_2LINES, SPI_DMAError(), SPI_DMAHalfReceiveCplt(), SPI_DMAReceiveCplt(), SPI_IT_ERR, SPI_MODE_MASTER, SPI_RESET_CRC, __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, __SPI_HandleTypeDef::TxXferSize, __DMA_HandleTypeDef::XferAbortCallback, __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

HAL_StatusTypeDef HAL_SPI_Receive_IT	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pData,
		uint16_t	Size
	)

Receive an amount of data in non-blocking mode with Interrupt.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pData	pointer to data buffer
Size	amount of data to be sent

Return values:

HAL

status

Definition at line 1443 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_DISABLE, __HAL_SPI_ENABLE, __HAL_SPI_ENABLE_IT, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::DataSize, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_RX, HAL_SPI_STATE_READY, HAL_SPI_TransmitReceive_IT(), __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, SPI_InitTypeDef::Mode, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_1LINE_RX, SPI_CRCCALCULATION_ENABLE, SPI_DATASIZE_8BIT, SPI_DIRECTION_1LINE, SPI_DIRECTION_2LINES, SPI_IT_ERR, SPI_IT_RXNE, SPI_MODE_MASTER, SPI_RESET_CRC, SPI_RxISR_16BIT(), SPI_RxISR_8BIT(), __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __SPI_HandleTypeDef::TxXferSize.

void HAL_SPI_RxCpltCallback

(

SPI_HandleTypeDef *

hspi

)

Rx Transfer completed callback.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.

Return values:

None

Definition at line 2503 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Init(), HAL_SPI_UnRegisterCallback(), SPI_CloseRx_ISR(), SPI_CloseRxTx_ISR(), and SPI_DMAReceiveCplt().

void HAL_SPI_RxHalfCpltCallback

(

SPI_HandleTypeDef *

hspi

)

Rx Half Transfer completed callback.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.

Return values:

None

Definition at line 2551 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Init(), HAL_SPI_UnRegisterCallback(), and SPI_DMAHalfReceiveCplt().

HAL_StatusTypeDef HAL_SPI_Transmit	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pData,
		uint16_t	Size,
		uint32_t	Timeout
	)

Transmit an amount of data in blocking mode.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pData	pointer to data buffer
Size	amount of data to be sent
Timeout	Timeout duration

Return values:

HAL

status

Definition at line 771 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_CLEAR_OVRFLAG, __HAL_SPI_DISABLE, __HAL_SPI_ENABLE, __HAL_SPI_GET_FLAG, assert_param, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::DataSize, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_GetTick(), HAL_SPI_ERROR_FLAG, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_TX, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, IS_SPI_DIRECTION_2LINES_OR_1LINE, SPI_InitTypeDef::Mode, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_1LINE_TX, SPI_CRCCALCULATION_ENABLE, SPI_DATASIZE_16BIT, SPI_DIRECTION_1LINE, SPI_DIRECTION_2LINES, SPI_EndRxTxTransaction(), SPI_FLAG_TXE, SPI_MODE_SLAVE, SPI_RESET_CRC, __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __SPI_HandleTypeDef::TxXferSize.

HAL_StatusTypeDef HAL_SPI_Transmit_DMA	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pData,
		uint16_t	Size
	)

Transmit an amount of data in non-blocking mode with DMA.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pData	pointer to data buffer
Size	amount of data to be sent

Return values:

HAL

status

Definition at line 1625 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_DISABLE, __HAL_SPI_ENABLE, __HAL_SPI_ENABLE_IT, assert_param, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_DMA_Start_IT(), HAL_SPI_ERROR_DMA, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_TX, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::hdmatx, __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, IS_SPI_DIRECTION_2LINES_OR_1LINE, IS_SPI_DMA_HANDLE, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_1LINE_TX, SPI_CRCCALCULATION_ENABLE, SPI_DIRECTION_1LINE, SPI_DMAError(), SPI_DMAHalfTransmitCplt(), SPI_DMATransmitCplt(), SPI_IT_ERR, SPI_RESET_CRC, __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, __SPI_HandleTypeDef::TxXferSize, __DMA_HandleTypeDef::XferAbortCallback, __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

HAL_StatusTypeDef HAL_SPI_Transmit_IT	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pData,
		uint16_t	Size
	)

Transmit an amount of data in non-blocking mode with Interrupt.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pData	pointer to data buffer
Size	amount of data to be sent

Return values:

HAL

status

Definition at line 1358 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_DISABLE, __HAL_SPI_ENABLE, __HAL_SPI_ENABLE_IT, assert_param, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::DataSize, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_TX, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, IS_SPI_DIRECTION_2LINES_OR_1LINE, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_1LINE_TX, SPI_CRCCALCULATION_ENABLE, SPI_DATASIZE_8BIT, SPI_DIRECTION_1LINE, SPI_IT_ERR, SPI_IT_TXE, SPI_RESET_CRC, SPI_TxISR_16BIT(), SPI_TxISR_8BIT(), __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __SPI_HandleTypeDef::TxXferSize.

HAL_StatusTypeDef HAL_SPI_TransmitReceive	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pTxData,
		uint8_t *	pRxData,
		uint16_t	Size,
		uint32_t	Timeout
	)

Transmit and Receive an amount of data in blocking mode.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pTxData	pointer to transmission data buffer
pRxData	pointer to reception data buffer
Size	amount of data to be sent and received
Timeout	Timeout duration

Return values:

HAL

status

Definition at line 1134 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_CLEAR_CRCERRFLAG, __HAL_SPI_CLEAR_OVRFLAG, __HAL_SPI_ENABLE, __HAL_SPI_GET_FLAG, assert_param, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::DataSize, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_GetTick(), HAL_SPI_ERROR_CRC, HAL_SPI_ERROR_FLAG, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_RX, HAL_SPI_STATE_BUSY_TX_RX, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, IS_SPI_DIRECTION_2LINES, SPI_InitTypeDef::Mode, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_CRCCALCULATION_ENABLE, SPI_DATASIZE_16BIT, SPI_DIRECTION_2LINES, SPI_EndRxTxTransaction(), SPI_FLAG_CRCERR, SPI_FLAG_RXNE, SPI_FLAG_TXE, SPI_MODE_MASTER, SPI_MODE_SLAVE, SPI_RESET_CRC, SPI_WaitFlagStateUntilTimeout(), __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __SPI_HandleTypeDef::TxXferSize.

Referenced by HAL_SPI_Receive().

HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pTxData,
		uint8_t *	pRxData,
		uint16_t	Size
	)

Transmit and Receive an amount of data in non-blocking mode with DMA.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pTxData	pointer to transmission data buffer
pRxData	pointer to reception data buffer

Note:

When the CRC feature is enabled the pRxData Length must be Size + 1

Parameters:

Size	amount of data to be sent

Return values:

HAL

status

Definition at line 1848 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_ENABLE, __HAL_SPI_ENABLE_IT, assert_param, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_DMA_Start_IT(), HAL_SPI_ERROR_DMA, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_RX, HAL_SPI_STATE_BUSY_TX_RX, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::hdmarx, __SPI_HandleTypeDef::hdmatx, __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, IS_SPI_DIRECTION_2LINES, IS_SPI_DMA_HANDLE, SPI_InitTypeDef::Mode, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_CRCCALCULATION_ENABLE, SPI_DIRECTION_2LINES, SPI_DMAError(), SPI_DMAHalfReceiveCplt(), SPI_DMAHalfTransmitReceiveCplt(), SPI_DMAReceiveCplt(), SPI_DMATransmitReceiveCplt(), SPI_IT_ERR, SPI_MODE_MASTER, SPI_RESET_CRC, __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, __SPI_HandleTypeDef::TxXferSize, __DMA_HandleTypeDef::XferAbortCallback, __DMA_HandleTypeDef::XferCpltCallback, __DMA_HandleTypeDef::XferErrorCallback, and __DMA_HandleTypeDef::XferHalfCpltCallback.

Referenced by HAL_SPI_Receive_DMA().

HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT	(	SPI_HandleTypeDef *	hspi,
		uint8_t *	pTxData,
		uint8_t *	pRxData,
		uint16_t	Size
	)

Transmit and Receive an amount of data in non-blocking mode with Interrupt.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.
pTxData	pointer to transmission data buffer
pRxData	pointer to reception data buffer
Size	amount of data to be sent and received

Return values:

HAL

status

Definition at line 1537 of file stm32f4xx_hal_spi.c.

References __HAL_SPI_ENABLE, __HAL_SPI_ENABLE_IT, assert_param, SPI_InitTypeDef::CRCCalculation, SPI_InitTypeDef::DataSize, SPI_InitTypeDef::Direction, __SPI_HandleTypeDef::ErrorCode, HAL_SPI_ERROR_NONE, HAL_SPI_STATE_BUSY_RX, HAL_SPI_STATE_BUSY_TX_RX, HAL_SPI_STATE_READY, __SPI_HandleTypeDef::Init, __SPI_HandleTypeDef::Instance, IS_SPI_DIRECTION_2LINES, SPI_InitTypeDef::Mode, __SPI_HandleTypeDef::pRxBuffPtr, __SPI_HandleTypeDef::pTxBuffPtr, __SPI_HandleTypeDef::RxISR, __SPI_HandleTypeDef::RxXferCount, __SPI_HandleTypeDef::RxXferSize, SPI_2linesRxISR_16BIT(), SPI_2linesRxISR_8BIT(), SPI_2linesTxISR_16BIT(), SPI_2linesTxISR_8BIT(), SPI_CRCCALCULATION_ENABLE, SPI_DATASIZE_8BIT, SPI_DIRECTION_2LINES, SPI_IT_ERR, SPI_IT_RXNE, SPI_IT_TXE, SPI_MODE_MASTER, SPI_RESET_CRC, __SPI_HandleTypeDef::State, __SPI_HandleTypeDef::TxISR, __SPI_HandleTypeDef::TxXferCount, and __SPI_HandleTypeDef::TxXferSize.

Referenced by HAL_SPI_Receive_IT().

void HAL_SPI_TxCpltCallback

(

SPI_HandleTypeDef *

hspi

)

Tx Transfer completed callback.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.

Return values:

None

Definition at line 2487 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Init(), HAL_SPI_UnRegisterCallback(), SPI_CloseTx_ISR(), and SPI_DMATransmitCplt().

void HAL_SPI_TxHalfCpltCallback

(

SPI_HandleTypeDef *

hspi

)

Tx Half Transfer completed callback.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.

Return values:

None

Definition at line 2535 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Init(), HAL_SPI_UnRegisterCallback(), and SPI_DMAHalfTransmitCplt().

void HAL_SPI_TxRxCpltCallback

(

SPI_HandleTypeDef *

hspi

)

Tx and Rx Transfer completed callback.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.

Return values:

None

Definition at line 2519 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Init(), HAL_SPI_UnRegisterCallback(), SPI_CloseRxTx_ISR(), and SPI_DMATransmitReceiveCplt().

void HAL_SPI_TxRxHalfCpltCallback

(

SPI_HandleTypeDef *

hspi

)

Tx and Rx Half Transfer callback.

Parameters:

hspi	pointer to a SPI_HandleTypeDef structure that contains the configuration information for SPI module.

Return values:

None

Definition at line 2567 of file stm32f4xx_hal_spi.c.

Referenced by HAL_SPI_Init(), HAL_SPI_UnRegisterCallback(), and SPI_DMAHalfTransmitReceiveCplt().